Fracture behaviour and numerical study of resistance spot welded joints in high-strength steel sheet

Cross tension tests of resistance spot welded joints with varying nugget diameter were carried out using 980 MPa high strength steel sheet of 1.6 mm thickness. In proportion, as nugget diameter increased from 3√t to 5√t (where t is thickness), cross tension strength (CTS) increased while fracture morphology simultaneously transferred from interface fracture to full plug fracture. In cases of interface fracture, circumferential crack initiation due to separation of the corona bond arose at an early stage of loading. The crack opening process without propagation was recognized until just before fracture and then the crack propagated to the nugget immediately in a brittle manner around CTS. In full plug fracture, main ductile crack initiation from the notch-like part at the end of sheet separation occurred with the sub-crack initiated at an early stage. The ductile crack propagated toward the HAZ and base material to form full plug fracture. The mode I stress intensity factor was considered as a suitable fracture parameter because the circumferential crack behaved pre-crack for brittle fracture in the nugget region at the final stage. Based on the FE analysis, the mode I stress intensity factor was calculated as 116 MPa √m at CTS as fracture toughness for the nugget. With respect to full plug fracture, ductile crack initiation behaviour from the notch-like part was expressed by concentration of equivalent plastic strain. On the assumption that the ductile crack arose in critical value of equivalent plastic strain, the value was calculated as 0.34 by FE analysis. Reasonable interpretation for interface fracture and full plug fracture in the resistance spot welded joint was proposed due to first crack initiation by stress concentration, brittle fracture by using mode I stress intensity factor, and ductile crack initiation by using equivalent plastic strain.     

Investigation report of geotechnical disaster on river area due to typhoon landfall three times on Okhotsk region,Hokkaido, Japan

For one week from August 17 to 23, 2016, three consecutive typhoons made landfall in Hokkaido for the first time on record. These typhoons and the front they stimulated brought record-breaking torrential rain over the eastern part of Hokkaido. To investigate the damage to grounds and rivers resulting from this rainfall, the Japan Society of Civil Engineers (JSCE) and the Japanese Geotechnical Society (JGS) formed a disaster research group to conduct an investigation. This report provides the results of the investigation into damage to the grounds of areas along the Tokoro River of the Okhotsk region, Hokkaido, that suffered from this tremendous and diverse disaster. Specifically, the report describes the situation of the levees which were broken and eroded by the overflowing water, the shape of the levee bodies, the levee body soil properties examined by observation of the sections, as well as the occurrence of sand boiling and air blows. The washout of road embankments as well as damage to road bridge mounting fills and abutment backfills were also investigated. The investigation has demonstrated the need to clarify the resistance of the abutment backfills and levee bodies to flowing water as well as the geotechnical predominant factors in order to clarify the mechanisms behind erosion and washout, the need to review new measures that allow for the scale of sand boiling and resultant changes in levee body stability, and the fact that the existing embankments were able to temporarily suppress the flooding water which had spilled over from the river. Furthermore, although it has been identified that the findings of a study on an embankment washout associated with a tsunami can be applied to measures taken against the overflowing water, it has also been found necessary to clarify the predominant geotechnical factors using model tests and to use a more sophisticated analytical approach to establish a geotechnical stability review as soon as possible in order to prevent the levees and embankments from being eroded and washed out due to overflowing water.     

Influence of metal ion concentration in the glycol mediated synthesis of Gd2O3:Eu nanophosphor

The solvothermal synthesis of highly luminescent and homogeneous Gd₂O₃:Eu³⁺ nanophosphor using diethylene glycol as medium, followed by controlled combustion with citric acid as fuel is reported. The influence of concentrations of carboxylic acid and metal cations on the structure, morphology and luminescence properties are investigated in detail. The microscopic investigations indicate the nanocrystalline nature and the strong influence of cation concentration on the size, shape and agglomeration of the particles. It is found that increase in concentration of metal cations lead to the reduction in agglomeration of nanophosphors. The large value of intensity parameter Ω_2, suggested that Eu³⁺ ions reside in a more asymmetric environment, resulted in intense emission due to ⁵D₀–⁷F₂ electric dipole transition. Emission decay analysis of the samples exhibited one exponential nature. The samples prepared under optimum conditions showed a quantum efficiency of 78.63% and a moderately high life time of 1.217 ms.     

Nickel‐Catalyzed Suzuki–Miyaura Coupling of a Tertiary Iodocyclopropane with Wide Boronic Acid Substrate Scope: Coupling Reaction Outcome Depends on Radical Species Stability

We describe a nickel‐catalyzed Suzuki–Miyaura arylation of a tertiary iodocyclopropane with arylboronic acids; this is an efficient and convergent strategy for providing various enantioenriched arylcyclopropanes with a quaternary stereogenic center. This is the first metal‐catalyzed coupling between a tertiary alkyl electrophile and a wide range of aromatics, including heteroaromatics. We found that the outcome of the Ni‐catalyzed coupling with halides as electrophiles was dependent on the stability of the radical species formed during the reaction. The use of tert‐butyl alcohol (t‐BuOH) as the reaction solvent was very effective, because of its stability under the radical‐generating reaction conditions.

     

Preparation of microporous polypropylene sheets containing CaCO3 filler: Effect of draft ratio

Microporous polypropylene sheets were prepared as follows. First, polypropylene pellet-containing CaCO₃ filler was extruded to prepare base sheets, which were then biaxially stretched. The draft effect at the extrusion process was studied in relation to some properties of the resultant microporous polypropylene sheets. © 1996 John Wiley & Sons, Inc.     

Microporous polypropylene fibers containing poly(methylsilsesquioxane) filler

Microporous polypropylene fibers were prepared by stretching polypropylene fibers containing poly(methylsilsesquioxane) filler. The properties of the resultant fibers are controllable by adjusting the filler content and stretching degree. The resultant fibers have a fine texture of polypropylene fibrils, in which the filler particles are dispersed. Some properties were investigated: tensile strength, elongation, Young's modulus, porosity, pore size, and specific surface area. © 1996 John Wiley & Sons, Inc.     

Immunomodulatory Properties and Osteogenic Activity of Polyetheretherketone Coated with Titanate Nanonetwork Structures

Polyetheretherketone (PEEK) is a potential substitute for conventional metallic biomedical implants owing to its superior mechanical and chemical properties, as well as biocompatibility. However, its inherent bio-inertness and poor osseointegration limit its use in clinical applications. Herein, thin titanium films were deposited on the PEEK substrate by plasma sputtering, and porous nanonetwork structures were incorporated on the PEEK surface by alkali treatment (PEEK-TNS). Changes in the physical and chemical characteristics of the PEEK surface were analyzed to establish the interactions with cell behaviors. The osteoimmunomodulatory properties were evaluated using macrophage cells and osteoblast lineage cells. The functionalized nanostructured surface of PEEK-TNS effectively promoted initial cell adhesion and proliferation, suppressed inflammatory responses, and induced macrophages to anti-inflammatory M2 polarization. Compared with PEEK, PEEK-TNS provided a more beneficial osteoimmune environment, including increased levels of osteogenic, angiogenic, and fibrogenic gene expression, and balanced osteoclast activities. Furthermore, the crosstalk between macrophages and osteoblast cells showed that PEEK-TNS could provide favorable osteoimmunodulatory environment for bone regeneration. PEEK-TNS exhibited high osteogenic activity, as indicated by alkaline phosphatase activity, osteogenic factor production, and the osteogenesis/osteoclastogenesis-related gene expression of osteoblasts. The study establishes that the fabrication of titanate nanonetwork structures on PEEK surfaces could extract an adequate immune response and favorable osteogenesis for functional bone regeneration. Furthermore, it indicates the potential of PEEK-TNS in implant applications.     

Microorganisms in landfill bioreactors for accelerated stabilization of solid wastes

Landfill bioreactors (LBRs) with management of leachate and biogas have presented numerous advantages such as accelerated stabilization of solid wastes, reduced amount of leachate, and in situ leachate treatment. Such advantages have minimized environmental risks, have allowed extension of the useful life of the landfill site, and have fostered cost reduction. LBRs of three types have been developed using both anaerobic and aerobic modes: anaerobic, aerobic, and hybrid. Microorganisms in landfills cause various reactions related with organic fractions and heavy metals. Such functions have been stimulated in LBRs by recirculation of leachate with or without aeration. To date, most studies of microorganisms in LBRs have analyzed bacteria and archaea based on 16S rRNA genes and have analyzed fungi based on 18S rRNA genes from a taxonomical viewpoint. Indicator genes for specific functions in LBRs such as nitrification, denitrification, and methane production have also been monitored. The population dynamics of microorganisms in LBRs have been partially clarified, but the obtained data remain limited because of highly heterogeneous features of solid wastes inside LBRs. Systematic monitoring of microorganisms should be established to improve LBR performance.     

Developmental ability of cloned embryos from neural stem cells

The success rate is generally higher when cloning mice from embryonic stem (ES) cell nuclei than from somatic cell nuclei, suggesting that the embryonic nature or the undifferentiated state of the donor cell increases cloning efficiency. We assessed the developmental ability of cloned embryos derived from cultured neural stem cell (NSC) nuclei and compared the success rate with that of embryos cloned from other donor cells such as differentiated NSCs, cumulus cells, Sertoli cells and ES cells in the mouse. The transfer of two-cell cloned embryos derived from cultured NSC nuclei into surrogate mothers produced five live cloned mice. However, the success rate (0.5%) was higher in embryos cloned from cultured NSC nuclei than from differentiated NSCs (0%), but lower than that obtained by cloning mice from other cell nuclei (2.2-3.5%). Although the in vitro developmental potential to the two-cell stage of the cloned embryos derived from NSC nuclei (73%) was similar to that of the cloned embryos derived from other somatic cell nuclei (e.g., 85% in Sertoli cells and 75% in cumulus cells), the developmental rate to the morula-blastocyst stage was only 7%. This rate is remarkably lower than that produced from other somatic cells (e.g., 50% in Sertoli cells and 54% in cumulus cells). These results indicate that the undifferentiated state of neural cells does not enhance the cloning efficiency in mice and that the arrest point for in vitro development of cloned embryos depends on the donor cell type.