Leaching behavior of heat-treated waste ash

The leaching behavior of heat-treated waste ash was studied to verify the possibility of the thermal treatment of waste incineration ash in existing incinerators and boiler combustion chambers. The influence of temperature, oxygen concentration and treatment time on the leaching behaviors of harmful heavy metals, especially lead (Pb) and chromium(VI) (Cr (VI)) were studied to clarify effective treatment conditions to suppress leaching. By examining the leaching behavior of Pb and Cr from ash heat-treated under various conditions, it was found that leaching can be suppressed by heat-treating the ash under conventional combustion conditions of around 900-1000 °C at 5-10% oxygen concentration. The leaching behaviors of Pb and Cr (VI) from real ash with different particle sizes and from model samples were also investigated in detail to find an effective method to suppress Pb leaching. It was found that the formation and growth of gehlenite (SiO₂·2CaO·Al₂O₃) in the ashes led to the decrease in the amount of Pb leaching. Therefore it was considered that the addition of an inorganic matrix with a high silica content that can promote gehlenite growth in the ash, for example, coal ash or waste glass is effective to suppress of Pb leaching.     

Influence of metal ion concentration in the glycol mediated synthesis of Gd2O3:Eu nanophosphor

The solvothermal synthesis of highly luminescent and homogeneous Gd₂O₃:Eu³⁺ nanophosphor using diethylene glycol as medium, followed by controlled combustion with citric acid as fuel is reported. The influence of concentrations of carboxylic acid and metal cations on the structure, morphology and luminescence properties are investigated in detail. The microscopic investigations indicate the nanocrystalline nature and the strong influence of cation concentration on the size, shape and agglomeration of the particles. It is found that increase in concentration of metal cations lead to the reduction in agglomeration of nanophosphors. The large value of intensity parameter Ω_2, suggested that Eu³⁺ ions reside in a more asymmetric environment, resulted in intense emission due to ⁵D₀–⁷F₂ electric dipole transition. Emission decay analysis of the samples exhibited one exponential nature. The samples prepared under optimum conditions showed a quantum efficiency of 78.63% and a moderately high life time of 1.217 ms.     

Synthesis and optical properties of azobenzene side chain polymers derived from the bifunctional fumaric acid and itaconic acid

Three type polymers containing the same azobenzene side chain group with different backbone structures, poly(DMAz6Fm), poly(DMAz6It) and poly(MAz6Ac) derived respectively from fumaric acid, itaconic acid and acrylic acid, were synthesized. The dependence of photo-response properties on the polymeric architecture was investigated for the solutions and films. By irradiation of the linearly polarized light (436 nm), uniaxial orientations of the thin films were induced and anisotropic properties were investigated by measurements of the order parameters and birefringence values.     

The Effects of Touch Button Size on Touchscreen Operability

The present study investigated the effects of touch button size on touchscreen operability and compared these effects between young adult and elderly participants. A total of 21 young adults （aged 22.3 ± 1.5 years） and 20 elderly adults （aged 68.1 ±4.9 years） were recruited and asked to press square number buttons （from 0 to 9） on an experimental touchscreen with their right index finger. The buttons＇ size changed during the experiment with six conditions （6, 8, 10, 12, 14 and 16 mm）. It was found that a decrease of the button size to l0 mm or below tended to increase the operation time and error rate, whereas it decreased the subjective overall operability of the touchscreen. Such effects were greater in the elderly adults than in the young adults. In addition, the reaction positions on the buttons were found to be close to the right side of them, which led the fingertip to approach the right outline of the buttons. These findings suggest that the use of small touch buttons should be minimised on touchscreens, especially for elderly users.     

Different feeding and gustatory responses to ecdysone and 20-hydroxyecdysone by larvae of the silkworm,Bombyx mori

The feeding and gustatory responses to ecdysone and 20-hydroxyecdysone were investigated in the silkworm,Bombyx mori. 20-Hydroxyecdysone reduced feeding response strongly in fourth- and fifth-instar larvae, whereas ecdysone had no effect on feeding response. 20-Hydroxyecdysone stimulated the R receptor, the receptor to feeding deterrents, to a great degree. By contrast, ecdysone was much less effective for stimulating the R receptor. These results indicate that ecdysone and 20-hydroxyecdysone have different effects on feeding response due to different interactions with mouthpart chemoreceptors.     

Experimental and simulation study of undesirable short-period deformation in piezoelectric deformable x-ray mirrors

To construct adaptive x-ray focusing optics whose optical parameters can be varied while performing wavefront correction, ultraprecise piezoelectric deformable mirrors have been developed. We computationally and experimentally investigated undesirable short-period deformation caused by piezoelectric actuators adhered to the substrate during mirror deformation. Based on the results of finite element method analysis, shape measurements, and the observation of x-ray reflection images, a guideline is developed for designing deformable mirrors that do not have short-period deformation errors.     

Residual oil cracking combined with hydrogen production by steam-iron reaction

A new residual oil upgrading process has been developed. Residual oils were cracked over an iron oxide catalyst with simultaneous generation of hydrogen. The newly-developed iron oxide catalyst containing CaO and Cr₂O₃ was found to be a good catalyst for this process because it exhibited stable activity in the steam-iron reaction in the laboratory experiment and also in a large scale pilot plant. Effects of these foreign oxides on redox cycles were investigated. The catalyst was designed so as to maintain the stoichiometric balance between the reduction of magnetite and the oxidation of wustite by adding CaO and Cr₂O₃.     

Microphase separation and crystallization of crystalline–amorphous type block copolymer. VI. Crystalline part in crystalline domain

The crystalline and amorphous areas in poly(tetrahydrofuran) (PTHF) domains in a poly(tetrahydrofuran-b-isoprene) (crystalline–amorphous, PTHF = 52 wt %) film were distinguished by transmission electron microscopy and the relation between the crystallization and domain shape was clarified. The ratio of PTHF domain containing amorphous area was low in the case of the fewer interfaces of the small curvature formed by poly(isoprene) domain. The PTHF crystallization was closely related to the interface shape. © 1994 John Wiley & Sons, Inc.     

Photoconductive imaging in a photon scanning tunnelling microscope capable of point-contact current sensing using a conductive fibre probe

A photoconductive photon scanning tunnelling microscope was developed to investigate the point-contact photoconductive properties of condensed matter. In order to detect the current and the optical signal at a local point on a surface, we coated the edge of a bent type fibre probe with indium tin oxide. Thus it was possible to measure both photocurrent and optical property with subwavelength resolution. The performance of the novel microscope was evaluated by analysing an organic thin film of copper phthalocyanine (CuPc), which is known to be an efficient photoconductive material. Photocurrent and current–voltage characteristics were observed at the local point on the CuPc thin films. Furthermore, photoconductive images were obtained with topography and near-field optical imaging using this system. The photoconductive PSTM shows potential in various areas of future optics and electronics.     

A study on the preparation of supported metal oxide catalysts using JRC-reference catalysts. I. Preparation of a molybdena–alumina catalyst. Part 4. Preparation parameters and impact index

The effects of the volume and pH of the impregnation solution and of the calcination conditions were examined on the physicochemical and catalytic properties of a 13 wt% MoO₃/Al₂O₃ extrudate catalyst. The Al₂O₃ support and drying procedures (static conditions without flowing air) were fixed in the preparations. In the present series of catalysts, the amount of crystalline MoO₃ was marginally small. It was found that the dispersion of Mo oxide species increased as the volume of the impregnation solution increased, gradually approaching a maximum value. The increase in pH (2–8) of the impregnation solution was found to reduce the dispersion of Mo oxide species. The Mo dispersion increased slightly for the impregnation catalysts as the calcination temperature increased (673–873 K), whereas it decreased for the equilibrium adsorption catalysts. The effects of the calcination atmosphere (with or without flowing air, or with flowing humid air) were very small on the dispersion of Mo oxide species under the present preparation conditions. On the other hand, the methanol oxidation activity of MoO₃/Al₂O₃ was sensitive to the preparation parameters examined here. It was demonstrated by means of EPMA and XPS that a considerable migration of Mo took place during the calcination.

In the present study on the preparation of a 13 wt% MoO₃/Al₂O₃ catalyst, an impact index is proposed to measure the magnitude of the effects of the respective parameter(s) on the physicochemical and catalytic properties. With the Mo dispersion, the effects of the preparation parameter decreased in the order, surface area of the support >> drying process > volume of the impregnation solution > pH, calcination temperature and atmosphere. The size of the impact index for the dispersion of Mo sulfide species is 70–75% of that for the Mo oxide species. The HDS activity of the catalyst was less affected by the preparation parameters than the Mo sulfide dispersion. The preparation parameters affected the segregation of Mo on the outer surface of extrudates in a decreasing order: drying process > volume of the impregnation solution > pH, calcination conditions. It was found that the oxidation of methanol was affected most intensely by the drying procedures. The volume of the impregnation solution, calcination conditions and pH of the impregnation solution also strongly affected the oxidation activity. The impact index suggests that the sensitivity to the preparation variables of the physicochemical and catalytic properties of MoO₃/Al₂O₃ decreases in the order, methanol oxidation activity > surface Mo segregation > Mo oxide dispersion > Mo sulfide dispersion > HDS activity.