Thermomechanical behavior of Ti-Ni shape memory alloy films deposited by DC magnetron sputtering

In this study, thermomechanical properties of titanium-nickel (Ti-Ni) shape memory alloy (SMA) films are investigated in order to derive constitutive relations. Ti-Ni SMA films, deposited by DC magnetron sputtering under controlled film composition, are characterized by uniaxial tensile tests. At room temperature (R.T.), Ti-Ni films having Ti contents less than 50 at% exhibit superelastic behavior, and those having Ti contents greater than 50 at% exhibit shape memory behavior. However, the Ni—53.2 at% Ti film fractured at a tensile strain of 0.8% because of an increase in brittleness with increasing Ti content. At elevated temperatures, Ti-Ni films having Ti contents of 50.2 to 52.6 at% undergo phase change from martensite to austenite. The Young's modulus of the Ti-Ni films depends on temperature at each phase, regardless of film composition. Film composition does, however, affect the measured material constants b_A, b_M, c_A, and c_M. Stress-strain curves calculated from the constructed constitutive equation closely agree with those obtained from tensile tests, for both the martensite and austenite phases. The constitutive equations are expected to find great utility in the design of Ti-Ni film-actuated microelectromechanical systems (MEMS).     

Optical pulse compression based on stationary rescaled pulse propagation in a comblike profiled fiber

In this paper, optical pulse compression using a comblike profiled fiber (CPF) is theoretically and experimentally studied, in which highly nonlinear fibers and single-mode fibers are alternately concatenated. Stationary rescaled pulse (SRP), is the main focus, which is a recently discovered nonlinear stationary pulse in CPF. The fundamental characteristics of SRP are investigated, and SRP propagation is applied to the design of the CPF pulse compressor. Using the proposed design method, the specifications of the CPF can easily be controlled, such as the compression ratio per step of the CPF or the pedestal of the output pulse. Two experimental results of pulse compression using the CPF based on the proposed design method are shown: 1) pulse compression with a large compression ratio per step of the CPF and 2) low-pedestal and wideband wavelength-tunable compression. A parametric noise-amplification phenomenon occurring in a compression process for an optical pulse sequence is also numerically analyzed.     

Preparation of ferroelectric Ba(Ti/sub 0.85/Sn/sub 0.15/)O/sub 3/ thin films by metal-organic decomposition

Ferroelectric Ba(Ti/sub 0.85/Sn/sub 0.15/)O/sub 3/ (BTS/sub 15/) thin film is newly prepared on the Pt/Ti/SiO/sub 2//Si substrate by metal-organic decomposition. The firing condition is determined by thermogravimetric and differential thermal analysis. The BTS/sub 15/ thin film with a flat surface and uniform thickness is obtained by spin coating in N/sub 2/ atmosphere that avoids moisture. The BTS/sub 15/ film has a perovskite phase and a preferential [110] texture. It is also found that the crystalline structure is cubic at 24/spl deg/C with a lattice constant of 4.01 /spl Aring/, and a grain size of about 30 nm was estimated by Scherrer equation and SEM image. From P-E hysteresis loop at 20/spl deg/C, the polarization at E=0 and the electric field at P=0 are found to be 1.07 /spl mu/C/cm/sup 2/ and 24.0 kV/cm, respectively. It is observed that the dielectric constant decreases monotonously from about 830 to 630 with increasing temperature ranging from 20/spl deg/C to 50/spl deg/C. Finally, it is found that the BTS/sub 15/ thin film shows a sufficient ferroelectricity and is an attractive material for functional ferroelectric devices, such as thermal-type infrared sensors.     

Inside Front Cover: Fabrication of Ideally Ordered Nanoporous Alumina Films and Integrated Alumina Nanotubule Arrays by High‐Field Anodization (Adv. Mater. 17/2005)

A simple, low‐cost approach to fabricating large‐area highly ordered nanoporous alumina films in sulfuric acid solutions through a single‐step high‐field anodization, without the assistance of any additional process, is reported on p. 2115 by Chu and co‐workers. The critical high anodizing potential in the adopted electrolyte system increases with the ageing of solutions after a long period of anodization. Correspondingly, the applicable current density for stable anodization rises significantly, thus leading to high‐speed film growth. Uniform porous anodic alumina films in sulfuric acid solutions under a high electric field of 40–70 V and 1600–2000 A m^–2 are achieved.     

Preparation and Property of Acrylic Acid Rare Earth Complex and Its Hydrosilylation

Acrylic acid rare earth complex was prepared. Its chemical composition was determined by chemical and elemental analysis, and its structure as well as properties was characterized using IR, Fluorescence and UV spectrum, and its solubility was also investigated. Meanwhile a kind of elastic functional polymer with rare earth units in the side chains was produced. It is confirmed by IR spectrum that the Si-H bonds really react with acrylic acid rare earth.     

Fabrication of alumina films with laminated structures by ac anodization

Anodization techniques by alternating current (ac) are introduced in this review. By using ac anodization, laminated alumina films are fabricated. Different types of alumina films consisting of 50–200 nm layers were obtained by varying both the ac power supply and the electrolyte. The total film thickness increased with an increase in the total charge transferred. The thickness of the individual layers increased with the ac voltage; however, the anodization time had little effect on the film thickness. The laminated alumina films resembled the nacre structure of shells, and the different morphologies exhibited by bivalves and spiral shells could be replicated by controlling the rate of increase of the applied potentials.     

Decentralized PD control for non-uniform motion of a Hamiltonian hybrid system

In this paper, a decentralized proportional-derivative （PD） controller design for non-uniform motion of a Hamiltonian hybrid system is considered. A Hamiltonian hybrid system with the capability of producing a non-uniform motion is developed. The structural properties of the system are investigated by means of the theory of Hamiltonian systems. A relationship between the parameters of the system and the parameters of the proposed decentralized PD controller is shown to ensure local stability and tracking performance. Simulation results are included to show the obtained non-uniform motion.     

Waveguide polarization-independent optical circulator

We fabricated a new type of waveguide polarization-independent optical circulator which does not need a polarization-beam splitter. The circulator is based on a non-reciprocal Mach-Zehnder interferometer which consists of two waveguide Faraday rotators, two thin-film half-waveplates and two planar lightwave circuit-type 3-dB couplers. The fabricated circulator provides a 14.0-23.7-dB isolation and a 3.0-3.3 dB insertion loss at λ=1.55 μm. This circulator presents a new possibility for developing non-reciprocal devices in the field of integrated optics     

Cooling Process and Cast Structure of Zr-Al-Ni-Cu–Based Bulk Metallic Glasses Produced in Various Atmospheres

Cooling process in the production of Zr₆₅Al_7.5Ni₁₀Cu_17.5-based bulk metallic glasses (BMGs) was investigated in various chamber atmospheres in Cu mold casting. Two different cooling modes, consisting of the direct heat transfer between the melt and Cu mold in the high temperature and indirect transfer via cavity in the low-temperature regions, are suggested. In the later case, the cooling effect should depend on the chamber atmosphere, which results in the formation of glassy structure with large relaxation enthalpy casting under the ambient Ar and He atmospheres due to a good thermal conductivity. The less relaxed BMGs produced by an improved cooling effect are also expected to contain a large amount of free volume for significant deformability. Actually, it is clarified that the compressive plastic deformation is improved with an increase of the relaxation enthalpy. The present study indicates a necessity of development of the glassy structure, i.e., relaxation state, and provides a new technique of the formation of less relaxed glassy structure for the improvement of plasticity in BMGs.