Novel high-precision current-mode multiplier/divider

In this paper, a method to reduce the second order effects on the circuit performances caused by the small sized MOS transistors is proposed. A current mode square-root circuit, a squarer/divider circuit and a multiplier/divider circuit are designed using this method. Proposed circuits have been simulated with SPICE simulator using 0.35 μm CMOS technology parameters. The main advantages of the proposed circuit are reduced errors of the output current function, a smaller area on the chip, possibility of controlling the output current with the control voltage, operation at higher frequencies and more efficient power consumption. As a result, it can be considered as a useful building block for IC designer.     

High Energy Density All‐Solid‐State Batteries: A Challenging Concept Towards 3D Integration

Rechargeable all‐solid‐state batteries will play a key role in many autonomous devices. Planar solid‐state thin film batteries are rapidly emerging but reveal several drawbacks, such as a relatively low energy density and the use of highly reactive metallic lithium. In order to overcome these limitations a new 3D‐integrated all‐solid‐state battery concept with significantly increased surface area is presented. By depositing the active battery materials into high‐aspect ratio structures etched in, for example silicon, 3D‐integrated all‐solid‐state batteries are calculated to reach a much higher energy density. Additionally, by adopting novel high‐energy dense Li‐intercalation materials the use of metallic Lithium can be avoided. Sputtered Ta, TaN and TiN films have been investigated as potential Li‐diffusion barrier materials. TiN combines a very low response towards ionic Lithium and a high electronic conductivity. Additionally, thin film poly‐Si anodes have been electrochemically characterized with respect to their thermodynamic and kinetic Li‐intercalation properties and cycle life. The Butler‐Vollmer relationship was successfully applied, indicating favorable electrochemical charge transfer kinetics and solid‐state diffusion. Advantageously, these new Li‐intercalation anode materials were found to combine an extremely high energy density with fast rate capability, enabling future 3D‐integrated all‐solid‐state batteries.     

Investigation of Enhancement Band Using Double Screen Frequency Selective Surfaces with Koch Fractal Geometry at Millimeter Wave Range

Numerical and theoretical investigations are presented for a double screen frequency selective surface (DSFSS) with perfectly conducting Koch fractal patch elements. The work was developed in two steps, in the first step two Koch fractal FSS screens were designed using the commercial software Ansoft Designer^TM. In the second these FSS were cascaded and separated by an air gap layer, forming the so-called DSFSS, to improve the bandwidth behavior. Thereafter, a numerical cascading technique is used to analyze the effect of the air gap on the DSFSS. The results were compared and a good agreement was observed.     

SDN‐based dynamic multipath forwarding for inter–data center networking

Equal‐cost multipath (ECMP)–based traffic engineering (TE) methods are commonly used in intra–data center (DC) networks to improve the transmission performance for east‐west traffic (ie, traffic from server to server within a DC). However, applying ECMP on inter‐DC wide area network (WAN) offers limited performance enhancement as a result of irregular network topology. Since TE can be intelligently and efficiently realized with software‐defined networking (SDN), SDN‐based multipath becomes a popular option. However, SDN suffers from scalability issue caused by limited ternary content‐addressable memory (TCAM) size. In this paper, we propose an SDN‐based TE method called dynamic flow‐entry‐saving multipath (DFSM) for inter‐DC traffic forwarding. DFSM adopts source‐destination–based multipath forwarding and latency‐aware traffic splitting to reduce the consumption of flow entries and achieve load balancing. The evaluation results indicate that DFSM saves 15% to 30% of system flow entries in practical topologies and reduces the standard deviation of path latencies from 10% to 7% than do label‐switched tunneling, and also reduces average latency by 10% to 48% by consuming 6% to 20% more flow entries than do ECMP in less‐interconnected topologies. Note that the performance gain may not always be proportional to flow entry investment, with the interconnectivity between nodes being an important factor. The evaluation also indicates that per‐flow provision consumes several times the flow entries consumed by DFSM but reduces latency by 10% at most. Besides, DFSM reduces the standard deviation of path latencies from 14% to 7% than do even traffic splitting.     

基于弯曲板波的延迟线振荡器的ANSYS仿真

针对复合板结构中弯曲板波谐振频率计算相对复杂的问题,建立并分析了基于弯曲板波延迟线振荡器的理论模型,计算得到A0(0阶反对称)模式板波的谐振频率为41 MHz;为了验证理论分析的结果,利用有限元软件ANSYS建立了基于弯曲板波的延迟线振荡器的3D有限元模型,并对其进行了谐响应分析以及瞬态动力学分析。谐响应分析得到A0模式的谐振频率为37.2 MHz,与理论计算结果的相对误差为9.3%;瞬态动力学分析得到A0模式的谐振频率为39.1 MHz,与理论计算结果的相对误差为4.6%。计算和仿真为基于弯曲板波的延迟线振荡器的结构设计提供了重要的依据。     

Vacuum-processed polyethylene as a dielectric for low operating voltage organic field effect transistors

We report on the fabrication and performance of vacuum-processed organic field effect transistors utilizing evaporated low-density polyethylene (LD-PE) as a dielectric layer. With C₆₀ as the organic semiconductor, we demonstrate low operating voltage transistors with field effect mobilities in excess of 4 cm²/Vs. Devices with pentacene showed a mobility of 0.16 cm²/Vs. Devices using tyrian Purple as semiconductor show low-voltage ambipolar operation with equal electron and hole mobilities of ～0.3 cm²/Vs. These devices demonstrate low hysteresis and operational stability over at least several months. Grazing-angle infrared spectroscopy of evaporated thin films shows that the structure of the polyethylene is similar to solution-cast films. We report also on the morphological and dielectric properties of these films. Our experiments demonstrate that polyethylene is a stable dielectric supporting both hole and electron channels.     

Tracking Twin Boundary Jerky Motion at Nanometer and Microsecond Scales

The jerky motion of twin boundaries in the ferromagnetic shape memory alloy Ni-Mn-Ga is studied by simultaneous measurements of stress and magnetic emissions (ME). A careful design of the experimental conditions results in an approximately linear relationship between the measured ME voltage and the nm-scale volumes exhibiting twinning transformation during microsecond-scale abrupt “avalanche” events. This study shows that the same distributions of ME avalanches, related to features of jerky twin boundary motion, are found both during and between stress drop events. Maximum likelihood analysis of statistical distributions of several variables reveals a good fit to power laws truncated by exponential functions. Interestingly, the characteristic cutoffs described by the exponential functions are in the middle of the distribution range. Further, the cutoff values can be related to the physical characteristics of the studied problem. Particularly, the cutoff of amplitudes of ME avalanches matches the value predicted by high rate magnetic pulse tests performed under much larger driving force values. This observation implies that avalanches during slow rate twin boundary motion and velocity changes observed by high rate tests represent the same behavior and can be described by the same theory.     

On‐the‐Spot Immobilization of Quantum Dots,Graphene Oxide,and Proteins via Hydrophobins

Class I hydrophobin Vmh2, a peculiar surface active and versatile fungal protein, is known to self‐assemble into chemically stable amphiphilic films, to be able to change wettability of surfaces, and to strongly adsorb other proteins. Herein, a fast, highly homogeneous and efficient glass functionalization by spontaneous self‐assembling of Vmh2 at liquid–solid interfaces is achieved (in 2 min). The Vmh2‐coated glass slides are proven to immobilize not only proteins but also nanomaterials such as graphene oxide (GO) and quantum dots (QDs). As models, bovine serum albumin labeled with Alexa 555 fluorophore, anti‐immunoglobulin G antibodies, and cadmium telluride QDs are patterned in a microarray fashion in order to demonstrate functionality, reproducibility, and versatility of the proposed substrate. Additionally, a GO layer is effectively and homogeneously self‐assembled onto the studied functionalized surface. This approach offers a quick and simple alternative to immobilize nanomaterials and proteins, which is appealing for new bioanalytical and nanobioenabled applications.