Inhibition kinetics of polyphenol oxidase by glutamic acid

The inhibition of polyphenol oxidase (PPO) by glutamic acid was investigated. Application of different concentrations of glutamic acid to mushroom solution and Ocimum basilicum L. extract showed that glutamic acid appeared to be an effective browning inhibitor. Glutamic acid showed uncompetitive inhibition for mushroom and Ocimum basilicum L. polyphenol oxidases using 4-methylcatechol as a substrate, for mushroom PPO using catechol as a substrate and for Ocimum basilicum L. polyphenol oxidase using pyrogallol as a substrate; mixed-type inhibition for mushroom polyphenol oxidase using pyrogallol as a substrate; and non-competitive inhibition for Ocimum basilicum L. polyphenol oxidase using catechol as a substrate. Furthermore, sodium azide was used as an inhibitor for comparison with the inhibition potency of glutamic acid. It was found that glutamic acid was a more power inhibitor than sodium azide. The type of inhibition observed depended on the substrate, inhibitor and enzyme source used.     

Preparation, characterization, and thermal properties of microencapsulated phase change material for thermal energy storage

This study is focused on the preparation, characterization, and determination of thermal properties of microencapsulated docosane with polymethylmethacrylate (PMMA) as phase change material for thermal energy storage. Microencapsulation of docosane has been carried out by emulsion polymerization. The microencapsulated phase change material (MEPCM) was characterized using scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy. Thermal properties and thermal stability of MEPCM were measured by differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). DSC analysis indicated that the docosane in the microcapsules melts at 41.0 °C and crystallizes at 40.6 °C. It has latent heats of 54.6 and −48.7 J/g for melting and crystallization, respectively. TGA showed that the MEPCM degraded in three distinguishable steps and had good chemical stability. Accelerated thermal cycling tests also indicated that the MEPCM had good thermal reliability. Based on all these results, it can be concluded that the microencapsulated docosane as MEPCMs have good potential for thermal energy storage purposes such as solar space heating applications.     

Partial characterization of peroxidase from the leaves of thymbra plant (Thymbra spicata L. var. spicata)

Peroxidase (EC 1.11.1.7; donor: hydrogen-peroxide oxidoreductase) catalyses the oxidation of various electron donor substrates (e.g. phenols, aromatic amines). In this study, the peroxidase was extracted from Thymbra spicata L. var. spicata and, then partially purified with (NH₄)₂SO₄ precipitation and dialysis. The substrate specificity of peroxidase was investigated using 2,2′-azino-bis(3-ethylbenz-thiazoline-6-sulfonic acid) (ABTS), o-dianisidine, o-phenylenediamine, catechol and guaiacol as substrates. Furthermore, the effects of buffer concentration, pH, temperature and thermal inactivation on enzyme activity were also studied. The results obtained have shown that (i) the best substrate is o-dianisidine, followed by ABTS, catechol, guaiacol and o-phenylenediamine, respectively; (ii) the best buffer concentration is 40 mM for o-dianisidine and catechol, 10 mM for ABTS and guaiacol, and 100 mM for o-phenylenediamine; (iii) optimum pH is 2.5 for ABTS and o-phenylenediamine, 6.0 for o-dianisidine, and 7.0 for catechol and guaiacol; (iv) optimum temperature is 20 °C for catechol, 40 °C for ABTS, guaiacol and o-dianisidine, and 50 °C for o-phenylenediamine; and (v) the enzyme activity in the thermal inactivation experiments was enhanced with increase in temperature with o-dianisidine as a substrate while its activity decreased with o-phenylenediamine.     

Ex-vessel core melt stabilization research (ECOSTAR)

The project on ex-vessel core melt stabilization research (ECOSTAR) started in January 2000 to be concluded by end of 2003. The project is performed by 14 partner institutions from five European countries and involves a large number of experiments with low- and high-temperature simulant melts and real corium at different scales. Model development and scaling analysis allows application of the research results to existing and to future LWRs in the area of reactor design and accident mitigation. The project is oriented toward the analysis and mitigation of severe accident sequences that could occur in the ex-vessel phase of a postulated core melt accident. The issues are: (1) the release of melt form the pressure vessel, (2) the transfer and spreading of the melt on the basement, (3) the analysis of the physical–chemical processes that are important for corium behavior especially during concrete erosion with onset of solidification, and (4) stabilization of the melt by cooling through direct water contact. The results achieved so far resolve a number of important issues: the amount of melt that could be transferred at RPV failure from the RPV into the containment can be substantially reduced by lowering the residual pressure in the primary circuit. It is found that melt dispersion also strongly depends on the location of the RPV failure, and that lateral failure results in substantially less melt dispersion. During melt release, the impinging melt jet could erode parts of the upper basement surface. Jet experiments and a derived heat transfer relation allow estimation of its contribution to concrete erosion. Spreading of the corium melt on the available basement surface is an important process, which defines the initial conditions for concrete attack or for the efficiency of cooling in case of water contact, respectively. Validation of the spreading codes based on a large-scale benchmark experiment is underway and will allow determination of the initial conditions, for which a corium melt can be assumed to spread homogeneously over the available surface. Experiments with UO₂-based corium melts highlight the role of phase segregation during onset of melt solidification and during concrete erosion. To cool the spread corium melt, the efficacy of top flooding and bottom flooding is investigated in small-scale and in large-scale experiments, supported by model developments. Project assessment is continuing to apply the results to present and future reactors.     

Performance Comparison of 2.4 and 5 GHz WiFi Signals and Proposing a New Method for Mobile Indoor Positioning

Wireless Personal Communications - Nowadays, the location information of people and objects is a necessity for indoor environments. Therefore, many technologies, methods, and algorithms have been...     

Effect of laser etching on the fracture strength of the monolithic zirconia and fiber-reinforced composite inlay-retained fixed partial dentures

Aim: The aim of this study was to evaluate the fracture strength of monolithic zirconia and fiber-reinforced composite (FRC) inlay-retained FPDs, both of which are cemented to the laser-etched cavity surfaces.

Materials and Methods: Eighty freshly extracted sound human teeth were used. A premolar and a molar tooth were embedded in an autopolymerizing acrylic resin. Forty acrylic resin models were randomly divided into two groups including monolithic zirconia and FRC inlay-retained FPDs (n = 20). Then, these groups were divided into two subgroups according to conditioning of the cavity surfaces with or without Er:YAG laser etching. Monolithic zirconia inlay-retained FPDs were produced by an inLab MC XL milling device using monolithic zirconia blocks. Tescera? Fiber Reinforcement Materials were used for the FRC inlay-retained FPDs. After 10.000 thermal cycles, fracture strength test was applied to the specimens.

Results: The monolithic zirconia inlay-retained FPDs exhibited the highest fracture strength than the FRC inlay-retained FPDs. Fracture strength was increased with laser etching for both restorative materials (p < 0.05).

Conclusion: Laser etching had positively effect on the fracture strength of the inlay-retained FDPs.     

X‐ray irradiated LDPE/PP blends with high mechanical and dielectric performance

In this study, the influences of polypropylene (PP) additive (varying from 20% to 80% wt) and low dose X‐ray irradiation (changing from 25 to 100 Gy) on the mechanical and dielectric properties of low‐density polyethylene (LDPE) were investigated. LDPE/PP film blends were prepared by hot press technique. While the highest Young modulus and tensile strength were observed for the 20%LDPE/80%PP blend at 25 Gy X‐ray irradiation, the same blend had the highest energy at break and percentage strain at break values for 50 Gy X‐ray exposure. These results also indicated a chain scission in the material. The differential scanning calorimetry curves also indicated a chain scission and crosslinking effects in the blends due to X‐ray irradiation. Hence, the higher concentration of PP additive and exposure of low dose X‐ray resulted in a polymer composite with high mechanical performance. On the other hand, the dielectric investigations revealed that the 25 Gy X‐ray irradiated 20%LDPE/80%PP blend may also attract attention for capacitor applications due to its increased static dielectric constant and reduced dielectric loss. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46571.     

Influence of scan strategy and process parameters on microstructure and its optimization in additively manufactured nickel alloy 625 via laser powder bed fusion

Automated systems based on programmable logic controllers (PLC) are still applied in discrete event systems (DES) for controlling and monitoring of industrial processes signals. PLC-based control systems are characterized for having physical input and output signals coming from and going to sensors and actuators, respectively, which they are in direct contact with the production or manufacturing process. The input subsystem to PLC consists of sensor-wiring-physical inputs module, and it can present two kinds of faults: short circuit or open circuit, in one or more signals of the process physical inputs, which it causes faults in the control and/or in the control algorithms behavior. Ladder diagram (LD) is one of the five programming languages supported by the International Electrotechnical Commission (IEC) through the IEC-61131-3 standard, and it remains being used at industry for control algorithm design of PLC-based systems. This paper proposes the simulation and validation of control algorithms developed in LD by using Petri Nets (PN) in order to deal with the possible fault options (short circuit and/or open circuit) in the physical inputs subsystem of a PLC-based control system. One control algorithms in LD have been analyzed in order to show the advantages of the proposed approach.     

Development and dynamic modelling of a flexure-based Scott–Russell mechanism for nano-manipulation

This paper presents the design methodology and dynamic modelling of a piezo-driven flexure-based Scott–Russell mechanism for nano-manipulations. Based on finite element analysis, the Scott–Russell mechanism is monolithically constructed to provide high positioning accuracy and long-term repeatability. With consideration for the effect of the driving circuit, the dynamic model of the flexure-based Scott–Russell mechanism is established. The influence of the time constant RC on the dynamic response is investigated. The transient responses of the flexure-based Scott–Russell mechanism to three typical signals are derived based on the Laplace transform method. It is noted that the cycloidal command signal can generate vibration-free motion, and thus improve the dynamic performance of the flexure-based mechanism. Experimental tests have been carried out to verify the developed Scott–Russell mechanism and the established models.