Photoelectric conversion of photosynthetic reaction center in multilayered films fabricated by layer-by-layer assembly

Multilayered protein films which contained ordered layers of photosynthetic reaction center (RC) from Rhodobacter Sphaeroides (RS601) were assembled by means of alternate electrostatic adsorption with positively charged poly(diallyldimethylammonium chloride) (PDDA). The assembly of RC was monitored by spectrometry and photocurrent measurement. Linear film growth was observed up to about 20 cycles of adsorption. For the monolayer film, the photocurrent was about 8.5 nA cm⁻². For the multilayered film, the total photocurrent was about 77 nA cm⁻² for the 24-layer RC film, while the average photocurrent increment per adsorption cycle was about 3.2 nA cm⁻². The overall light-to-electricity conversion efficiency for a 24-layer film was about eight times higher than that for the monolayer one. The effects of electrode potential and pH on the photocurrent were also measured to illustrate the light-to-electric converting mechanism.     

High catalytic activity of PdOx/MnO2 for CO oxidation and importance of oxidation state of Mn

PdO_x/MnO₂ has been examined as a catalyst for CO oxidation using a conventional flow reactor at reaction temperatures between 50 and 150°C. In the reaction conditions of GHSV (gashourlyspacevelocity) of 1.22 × 10⁵/h and CO concentration of 2000 ppm, PdO_x/MnO₂ showed higher catalytic activity compared with PdO_x/Mn₂O₃, which had been previously reported as an effective catalyst due to the cooperative action of Pd and Mn₂O₃ for this reaction. The reason for higher activity of PdO_x/MnO₂ than PdO_x/Mn₂O₃ has been investigated using TPR (temperatureprogrammed reduction) and XPS studies. TPR showed that PdO_x/MnO₂ could be reduced by CO at much lower temperature than PdO_x/Mn₂O₃. During the experiment of reduction and oxidation, XPS showed that the valence of Mn in the PdO_x/MnO₂ was between 4+ and 3+, which is higher than that of Mn in the PdO_x/Mn₂O₃ catalyst of which the valence has been reported to be between 3+ and 2+. It is known that in this catalyst system the support supplies oxygen onto Pd, where the oxidation occurs with adsorbed CO, and the ability of the support to provide oxygen improves the performance of the catalyst. Therefore, it was concluded that the readiness of MnO₂ to be reduced with maintaining a higher oxidation state showed higher CO oxidation activity than Mn₂O₃ as support for PdO_x.     

Glass transitions of styrene/α-methylstyrene statistical copolymers and of their blends with PPO® resin

The glass transition temperatures (T_g) and specific heat increments (ΔC_p) at T_g of S/AMS statistical copolymers having weight fractions AMS of 0.00, 0.09, 0.17, 0.26, 0.36, and 0.44 are (by DSC) 380.0 (0.280), 384.2 (0.275), 388.8 (0.284), 391.5 (0.275), 398.3 (0.272), and 405.9 (0.27) °K (J·g^? ·deg^?), respectively. The T_g (ΔC_p) for the PPO resin are 492.2 (0.221). The glass transitions of P(S/AMS) (1) + PPO resin (2) blends having w2 = 0.25, 0.50, and 0.75 were also measured. Examination of the copolymer and blend T_g vs. composition data indicates that a relation recently proposed by Couchman gives a somewhat better approximation than the simple Fox relation. However, the nonadjustable k = ΔC_p2/ΔC_p1 constant in the Couchman relation must be replaced by a smaller empirical k to give a true match of calculated to observed T_g.     

Molecular modeling of antibody-antigen complexes between the Brucella abortus O-chain polysaccharide and a specific monoclonal antibody

A molecular model of the binding site of an anti-carbohydrateantibody (YsT9.1) has been developed using computer-assistedmodeling techniques and molecular dynamics calculations. Sequencehomologies among YsT9.1 and the Fv regions of McPC603, J539and human Bence-Jones protein REI, all of which have solvedcrystal structures, provided the basis for the modeling. Thegroove-type combining site model had a topography which wascomplementary to low energy confonners of the polysaccharide,a Brucella O-antigen, and the site could be almost completelyfilled by a pentasaccharide epitope in either of two dockingmodes. Putative interactions between this epitope and the antibodyare consistent with the known structural requirements for bindingand lead to the design of oligosaccharide inhibitors that probethe veracity of the modeled docked complex. Ultimately boththe Fv model and the docked complex will be compared with independentcrystal structures of YsT9.1 Fab with and without pentasaccharideinhibitor, currently at the stage of refinement.     

Effects of laser heat treatment on the fracture morphologies of X80 pipeline steel welded joints by stress corrosion

The surfaces of X80 pipeline steel welded joints were processed with a CO2 laser, and the effects of laser heat treatment （LHT） on H2S stress corrosion in the National Association of Corrosion Engineers （NACE） solution were analyzed by a slow strain rate test. The fracture morphologies and chemical components of corrosive products before and after LHT were analyzed by scanning electron microscopy and energy-dispersive spectroscopy, respectively, and the mechanism of LHT on stress corrosion cracking was discussed. Results showed that the fracture for welded joints was brittle in its original state, while it was transformed to a ductile fracture after LHT. The tendencies of hydrogen-induced corrosion were reduced, and the stress corrosion sensitivity index decreased from 35.2% to 25.3%, indicating that the stress corrosion resistance of X80 pipeline steel welded joints has been improved by LHT.     

炼油厂酮苯装置空冷器腐蚀原因分析

炼厂酮苯装置空冷器因空冷管束腐蚀穿孔被迫停工检修，经取样分析和现场调查，得出结论：溶解氧含量偏高，设备本身存在震动，无盐水质量不稳定及空冷管束选材不当是造成空冷器管束腐蚀穿孔的主要原因，提出有效大的防腐措施。     

Automated classification of touching or overlapping M-FISH chromosomes by region fusion and homolog pairing

Automated separation and classification of touching or overlapping chromosomes in a metaphase image is a critical step in computer-aided chromosome analysis. The advent of the multiplex fluorescence in situ hybridization (M-FISH) technology enables multi-spectral chromosome image with rich spectral information and DAPI image with abundant texture information. This paper presents a fusion classification scheme to improve the segmentation of overlapping and touching chromosomes. First, the texture and spectral information is fused to partition the chromosome cluster into a series of homologous regions. Then a graph-theoretical classification and pairing method is proposed to resolve any remaining ambiguity of the aforementioned separation process. Experiment results demonstrate that the proposed method outperforms conventional multi-spectral classification methods in touching and overlapping chromosome separation.     

A Lyapunov functional approach to robust stability analysis of continuous-time uncertain linear systems in polytopic domains

In this paper, a sufficient linear matrix inequality (LMI) condition is presented for robust stability analysis of continuous-time linear time-invariant (LTI) systems in polytopic domains. The underlying idea behind the proposed approach is to introduce a family of complex functions which map the closed right-hand side of the complex plane into the inside of the closed unit circle centered at the origin. Then, the mapping properties are used to assure that all the eigenvalues of a system are located in the open left-hand side of the complex plane. Examples show the validity of the proposed condition.     

利用POMDP模型来增强分布式系统的生存性

针对分布式系统存在的状态信息不完全问题,引入部分可观察的马尔可夫决策过程(POMDP)模型到生存控制系统中.在该控制系统的构造过程中,结合前瞻的思想,提出一种简易、有效的搜索算法(NSL算法)来作出决策,从而在一定程度上弥补了现有生存控制系统的不足,提高了分布式系统的可生存性.