Hierarchical Order Statistics Filtering for Fast Bi‐Dimensional Empirical Mode Decomposition

A hierarchical approach for fast bi‐dimensional empirical mode decomposition (B‐EMD) is proposed. The presented approach utilizes an efficient window size determination scheme that enables the multi‐level computation of the order statistics filter (OSF). Our detailed experiments show that the proposed OSF computation approach allows a significantly faster computation of an EMD without degrading the decomposition accuracy.     

Subsurface stresses in graded coatings subjected to frictional contact with heat generation

In this article, the thermoelastic contact problem involving a functionally graded coating and a homogenous substrate is considered. Determination of subsurface stresses is highly critical in the design of mechanical assemblages due to fatigue and fracture failures resulting from contact loading. In such contact problems, cracking generally initiates at the locations of high subsurface stresses. The present study proposes a finite element methodology for the computation of subsurface stresses in functionally graded coatings subjected to frictional contact with heat generation. The method developed is based on iterations continued until convergence is observed in the contact zone heat flux values. Presented results illustrate the influences of various geometric and material parameters upon the subsurface stresses.     

Halloysite Nanotubes/Polyethylene Nanocomposites for Active Food Packaging Materials with Ethylene Scavenging and Gas Barrier Properties

Novel polymeric active food packaging films comprising halloysite nanotubes (HNTs) as active agents were developed. HNTs which are hollow tubular clay nanoparticles were utilized as nanofillers absorbing the naturally produced ethylene gas that causes softening and aging of fruits and vegetables; at the same time, limiting the migration of spoilage-inducing gas molecules within the polymer matrix. HNT/polyethylene (HNT/PE) nanocomposite films demonstrated larger ethylene scavenging capacity and lower oxygen and water vapor transmission rates than neat PE films. Nanocomposite films were shown to slow down the ripening process of bananas and retain the firmness of tomatoes due to their ethylene scavenging properties. Furthermore, nanocomposite films also slowed down the weight loss of strawberries and aerobic bacterial growth on chicken surfaces due to their water vapor and oxygen barrier properties. HNT/PE nanocomposite films demonstrated here can greatly contribute to food safety as active food packaging materials that can improve the quality and shelf life of fresh food products.     

Fatigue damage in composite cylinders

In this study, optimal angle‐ply orientation of symmetric composite cylinders under fatigue loading is investigated. The fiber‐reinforced plastic cylinders were manufactured from E‐glass/epoxy. The layers were manufactured symmetrically in [±75°]₂, [±60°]₂, [±55°]₂, and [±45°]₂ orientations. Burst pressure of filament‐wound composite cylinders under alternating pure internal pressure was measured experimentally. Internal fatigue pressure testing method was applied to the composite cylinders in close‐ended condition. For this study, a PLC controlled hydraulic pressure testing machine has been employed. The static burst pressure values of specimens were measured; subsequently, fatigue test pressure was applied in 70, 60, and 50% stress levels of burst pressure for each orientation. Damage propagations of the composite cylinders on these stress levels were observed as whitening, leakage, and final failure for [±60°]₂, [±55°]₂, and orientations. When the damage propagation of [±75°]₂ angle‐ply cylinder was observed, whitening and leakage did not occur and final failure occurred suddenly. Stress‐cycle curves obtained from the tests are given in graphics. Experimental results reveal that variation in stress levels and the winding angles have considerable effects on final failure cycles, which is also presented graphically. The optimum winding angle for the composite pressure cylinders or vessels under internal fatigue pressure load was obtained as [±45°]₂ orientation. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

The elusive effects of workplace diversity on innovation

We investigate econometrically whether cultural diversity at the workplace boosts innovation. Our longitudinal linked employer‐employee data combines two innovation surveys, with Dutch administrative, tax and regional data. We analyse the determinants of a firm's product and process innovations with respect to the firm's internal resources, employee composition and regional agglomeration externalities. We reconfirm the findings of several other recent studies showing a positive partial correlation between innovation and cultural diversity in pooled cross‐sectional data; in some cases even when accounting for reverse causation. However, no statistically significant traces of benefit for innovation from cultural diversity remain after introducing firm fixed effects.     

RAFT-mediated synthesis of cationic poly[(ar-vinylbenzyl)trimethylammonium chloride] brushes for quantitative DNA immobilization

The synthesis of cationic poly[(ar-vinylbenzyl)trimethylammonium chloride)] [poly(VBTAC)] brushes was achieved via reversible addition-fragmentation chain transfer (RAFT) polymerization and used for quantitative DNA immobilization. Initially, silicon surfaces were modified with RAFT chain transfer agent by utilizing an amide reaction involving a silicon wafer modified with allylamine and 4-cyanopentanoic acid dithiobenzoate (CPAD). Poly(VBTAC) brushes were then prepared via RAFT-mediated polymerization from the surface immobilized CPAD. Various characterization techniques including ellipsometry, X-ray photoelectron spectroscopy, grazing angle-Fourier transform infrared spectroscopy, atomic force microscopy and contact-angle goniometer were used to characterize the immobilization of CPAD on the silicon wafer and the subsequent polymer formation. The addition of free CPAD was required for the formation of well-defined polymer brushes, which subsequently resulted in the presence of free polymer chains in solution. The free polymer chains were isolated and used to estimate the molecular weights and polydispersity index of chains attached to the surface. Moreover, from atomic force microscopy and ellipsometry measurements, it was also determined that the density of immobilized DNA on the cationic poly(VBTAC) brushes can be quantitatively controlled by adjusting the solution concentration.     

‘Fairy Chimney’‐Shaped Tandem Metamaterials as Double Resonance SERS Substrates

A highly tunable design for obtaining double resonance substrates to be used in surface‐enhanced Raman spectroscopy is proposed. Tandem truncated nanocones composed of Au‐SiO₂‐Au layers are designed, simulated and fabricated to obtain resonances at laser excitation and Stokes frequencies. Surface‐enhanced Raman scattering experiments are conducted to compare the enhancements obtained from double resonance substrates to those obtained from single resonance gold truncated nanocones. The best enhancement factor obtained using the new design is 3.86 × 10⁷. The resultant tandem structures are named after “Fairy Chimneys” rock formation in Cappadocia, Turkey.     

CIRCUMFERENTIAL CRACK PROBLEM FOR AN FGM CYLINDER UNDER THERMAL STRESSES

The main objective of this study is to determine the stress intensity factors associated with a circumferential crack in a thin-walled cylinder subjected to quasi-static thermal loading. The cylinder is assumed to be a functionally graded material. In order to make the problem analytically tractable, the thin-walled cylinder is modeled as a layer on an elastic foundation whose thermal and mechanical properties are exponential functions of the thickness coordinate. Hence a plane strain crack problem is obtained. First temperature and thermal stress distributions for a crack-free layer are determined. Then using these solutions, the crack problem is reduced to a local perturbation problem where the only nonzero loads are the crack surface tractions. Both internal and edge cracks are considered. Stress intensity factors are computed as functions of crack geometry, material properties, and time.     

Hygrothermal Fracture Analysis of Orthotropic Materials Using J k -Integral

A new computational method based on the J _k -integral is put forward for the purpose of conducting fracture analysis of orthotropic materials subjected to hygrothermal stresses. By utilizing the constitutive relations of plane orthotropic hygrothermoelasticity, an alternative expression for the J _k -integral is derived to replace the general limit definition. A numerical procedure is developed and integrated into a finite element analysis software to implement the proposed form of the J _k -integral. Temperature and specific moisture concentration fields, which are required in fracture calculations, are also computed through finite element analysis. Numerical results are generated by considering an embedded crack in a polymer matrix fibrous composite laminate, that is subjected to steady-state hygrothermal loading. Comparisons of the mixed-mode stress intensity factors computed by the J _k -integral based method to those evaluated via the displacement correlation technique demonstrate that, the proposed form of the J _k -integral is domain independent and leads to numerical results of high accuracy. Presented parametric analyses illustrate the influences of the fiber volume fraction and the crack location on the modes I and II stress intensity factors, the energy release rate, and the T-stress.