Mechanical characterization of a bituminous mix under quasi-static and high-strain rate loading

There are various methods to determine the compressive and tensile strength of asphalt concrete under static loading conditions and most studies on asphalt strength and fracture have been conducted under such loading conditions. However, pavement materials also have to withstand a wide variety of loading and temperature conditions which may vary from quasi-static to high-strain rate impact, and pavement breakdown may occur due to fracture and/or fatigue failure. In the present study, a bituminous mix with 30% RAP has been characterized under quasi-static (10^?3–10^?4 strain/s) and high-strain rate (200–700 strain/s) regimes. The experimental studies have been performed to better understand the compressive, tensile and fracture response of bituminous mixes. Split Hopkinson pressure bar (SHPB) and its modifications were used for high-strain rate characterization of this bituminous mixture. It was observed that the mechanical properties of the hot mix asphalt (HMA) changed significantly under high-strain rate testing. Also, the failure mechanisms observed under the high-strain rate loading were found to be considerably different from those obtained in static testing, where failure of binder was a predominant mechanism. It was observed that high-strain rate loading caused trans-aggregate failures in the specimens; in addition to failure of the binder.     

Effect of underlap and soft error performance in 30 nm FinFET-based 6T-SRAM cells with simultaneous and independent driven gates

The effect of Gate-Source/Drain underlap (L _un) on soft error performance in 30 nm common double gate-FinFET (simultaneously driven gates) and independent double gate-FinFET (independently driven gates) have been examined through extensive mixed mode-device and circuit simulations using Sentaurus TCAD. Four different 6T-SRAM topologies, one simultaneously driven double gate-FinFET and three independently driven double gate-FinFETs-based topologies namely Flex-V _TH, Flex-PG, and PG-SN are chosen to study the geometrical parameter L _un and also to calculate their soft error performance. When L _un increases, current decreases due to increase in parasitic series resistance. The simulation results reveal that L _un increase in independently driven double gate-FinFETs in place of access devices in 6T-SRAM does not degrade the soft error performance significantly whereas the L _un increase inside the cell, in the inverters, degrade the performance significantly.     

Minocycline Loaded Hybrid Composites Nanoparticles for Mesenchymal Stem Cells Differentiation into Osteogenesis

Bone transplants are used to treat fractures and increase new tissue development in bone tissue engineering. Grafting of massive implantations showing slow curing rate and results in cell death for poor vascularization. The potentials of biocomposite scaffolds to mimic extracellular matrix (ECM) and including new biomaterials could produce a better substitute for new bone tissue formation. A purpose of this study is to analyze polycaprolactone/silk fibroin/hyaluronic acid/minocycline hydrochloride (PCL/SF/HA/MH) nanoparticles initiate human mesenchymal stem cells (MSCs) proliferation and differentiation into osteogenesis. Electrospraying technique was used to develop PCL, PCL/SF, PCL/SF/HA and PCL/SF/HA/MH hybrid biocomposite nanoparticles and characterization was analyzed by field emission scanning electron microscope (FESEM), contact angle and Fourier transform infrared spectroscopy (FT-IR). The obtained results proved that the particle diameter and water contact angle obtained around 0.54 ± 0.12 to 3.2 ± 0.18 µm and 43.93 ± 10.8° to 133.1 ± 12.4° respectively. The cell proliferation and cell-nanoparticle interactions analyzed using (3-(4,5-dimethyl thiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium inner salt) MTS assay (Promega, Madison, WI, USA), FESEM for cell morphology and 5-Chloromethylfluorescein diacetate (CMFDA) dye for imaging live cells. Osteogenic differentiation was proved by expression of osteocalcin, alkaline phosphatase activity (ALP) and mineralization was confirmed by using alizarin red (ARS). The quantity of cells was considerably increased in PCL/SF/HA/MH nanoparticles when compare to all other biocomposite nanoparticles and the cell interaction was observed more on PCL/SF/HA/MH nanoparticles. The electrosprayed PCL/SF/HA/MH biocomposite nanoparticle significantly initiated increased cell proliferation, osteogenic differentiation and mineralization, which provide huge potential for bone tissue engineering.     

Slope instability analysis in Phyllitic rock in the Lesser Himalayan using three different modeling approach

Bulletin of Engineering Geology and the Environment - The numerical methods for slope stability problems always have a serious concern related to their continuum and discontinuum nature. In...     

Enhanced Stretch Formability of Magnesium Alloy Sheet by Prestretching at Various Speeds at Higher Temperature

JOM - Prestretch deformation of 6.48% with various initial speeds (1 mm/min, 101 mm/min, and 100 mm/min) was carried out at 723 K to improve the formability of...     

Microstructure and Mechanical Property Correlation of Mg-Si Alloys

Silicon - The present work aims at understanding the microstructure and mechanical property correlation of hypo (Mg-0.5, 0.7, 1.15 wt% Si) and hyper (Mg-2, 4, 6, 8 and 10 wt% Si) eutectic binary...     

The hydrothermal synthesis and structure of a one-dimensional Fe(II)molybdophosphate

A new one-dimensional Fe(II)molybdophosphate of the formula, [(C₁₀H₈N₂)H₂]₂[Fe₄^(II)Mo₁₂^(V)(HPO₄)₆(PO₄)₂(H₂O)₈(OH)₆O₂₄]·8H₂O, (1), has been synthesized by employing hydrothermal methods and characterized by single crystal X-ray diffraction. The structure consists of a network of MO₆ (M = Fe, Mo) octahedra and (H)PO₄ tetrahedra linked through their vertices. The connectivity between the polyhedral units gives rise to one-dimensional chains with eight-membered apertures. The hydrogen bonded interactions between the chains form pseudo two-dimensional layers. Extensive hydrogen bonding also exists between the amine molecule, 4,4^′-bipyridine, water molecule and framework oxygen atoms. Crystal data for 1: monoclinic, space group = P2₁ (no. 4), a=12.549(3) (Å), b=23.496(5) (Å), c=14.551(3) (Å), β=114.87(3)°, , and Z=2.     

Hydrogen permeation during zinc-manganese alloy plating

Electrodeposition of metals from solution is usually accompanied by the simultaneous discharge of hydrogen ions or water molecules. When hydrogen is liberated at an iron/steel surface during electrodeposition, a portion of the hydrogen is absorbed by the metal surface and then diffuses into the interior. The diffused hydrogen produces some detrimental effects, such as reduction in ductility and loss in mechanical strength, leading to hydrogen embrittlement. The present paper reports investigations on hydrogen permeation measurements in zinc-manganese alloy deposition using a modified electrode clamp for easy removal and fixing of the electrode. Hydrogen permeation studies indicate that the porosity of the deposit increases in the following order:Zn-Mn(14.3%), Zn-Mn(2.4%), Zn-Mn(24.8%) and Zn-Mn(37.5%).This is in agreement with the corrosion data obtained which indicates that Zn-Mn alloy deposits with low manganese content show better performance than pure zinc deposits.