Mixed convective heat transfer enhancement in a ventilated cavity by flow modulation via rotating plate

The present study numerically explores the mixed convection phenomena in a differentially heated ventilated square cavity with active flow modulation via a rotating plate. Forced convection flow in the cavity is attained by maintaining external fluid flow through an opening at the bottom of the left cavity wall while leaving it through another opening at the right cavity wall. A counter-clockwise rotating plate at the center of the cavity acts as an active flow modulator. Moving mesh approach is used for the rotation of the plate and the numerical solution is achieved using arbitrary Lagrangian-Eulerian finite element formulation with a quadrilateral discretization scheme. Transient parametric simulations have been performed for various frequency of the rotating plate for a fixed Reynolds number (Re) of 100 based on maximum inlet flow velocity while the Richardson number (Ri) is maintained at unity. Heat transfer performance has been evaluated in terms of spatially averaged Nusselt number and time-averaged Nusselt number along the heated wall. Power spectrum analysis in the frequency domain obtained from the fast Fourier transform analysis indicates that thermal frequency and plate frequency start to deviate from each other at higher values of velocity ratio (>4).     

Aggregate nonparametric safety analysis of traffic zones

Exploring the significant variables related to specific types of crashes is vitally important in the planning stage of a transportation network. This paper aims to identify and examine important variables associated with total crashes and severe crashes per traffic analysis zone (TAZ) in four counties of the state of Florida by applying nonparametric statistical techniques such as data mining and random forest. The intention of investigating these factors in such aggregate level analysis is to incorporate proactive safety measures in transportation planning. Total and severe crashes per TAZ were modeled to provide predictive decision trees. The variables which carried higher weight of importance for total crashes per TAZ were – total number of intersections per TAZ, airport trip productions, light truck productions, and total roadway segment length with 35 mph posted speed limit. The other significant variables identified for total crashes were total roadway length with 15 mph posted speed limit, total roadway length with 65 mph posted speed limit, and non-home based work productions. For severe crashes, total number of intersections per TAZ, light truck productions, total roadway length with 35 mph posted speed limit, and total roadway length with 65 mph posted speed limit were among the significant variables. These variables were further verified and supported by the random forest results.     

A comparative study of SiAlON ceramics

Two different varieties of Si₃N₄ powders were used to prepare SiAlON ceramics. 100% β-Si₃N₄ was used from refractory grade powders (B1) and another purer 98% α-Si₃N₄ (50A) powder was used to prepare the SiAlON samples. Since SiC + SiAlON composites reportedly perform better, batches were prepared with 15% SiC addition to the refractory powders (B1) and 17.5% SiC was added to the other SiAlON composition (50A). The samples were gas pressure sintered at 1840 °C and at 22 bar with 1 h dwelling time. Thereby, we could achieve 97–98% theoretical density. The hardness was recorded 14–17 GPa while fracture toughness varied from 4.3 to 5 MPa m^1/2. Fretting experiments showed initial running-in period of 300 cycles for all the tribo-couples. After which, the steady state coefficient of frictions (COF) were achieved. Steel ball of 10 mm diameter, fretting against 50A composition, showed 0.6 average steady state COF while the same composition while fretting against alumina ball of the same diameter, showed 0.57 average steady state COF. Results have been compared with SiAlON composition derived from refractory powder (B1) and found that the 50A composition performs better under identical test conditions. Moreover, cytocompatibility study also suggests that the investigated 50A composition can be used as substrate to support cell adhesion and proliferation of L929 mouse fibroblast cell lines whereas B1 composition derived from refractory powders are toxic in nature.     

Effect of gamma irradiation on structural,morphological and optical properties of thermal spray pyrolysis deposited CuO thin film

This study reports the influences of gamma irradiation (GI) in the range of 20–100 kGy on CuO thin films via thermal spray pyrolysis technique on the glass substrates. The results demonstrate significant influences of GI on the crystallographic, microstructural and optical characteristics of CuO thin films. The obtained XRD results showed that the crystallinity of the films deteriorates by gradually decreasing crystallite size (from 59.13 to 46 nm) as applied gamma doses increases. However, the basic monoclinic crystal structure remains same. The dislocation density and lattice strain increased with the rise of GI absorbed dose due to the creation of defects. The values of number of crystallites per unit surface area increased as dose increased indicating the abundance of crystallization of nano CuO thin films. A UV–Vis–NIR spectrophotometer was utilized to determine the optical properties and obtained results indicated that the optical energy band gap (OBG) energies reduced from 2.00 to 1.72 eV as the doses increased from 0 to 100 kGy. No distinctions of the monoclinic phase of virgin CuO thin film have been perceived under applied absorbed doses, notwithstanding the slight deterioration of the crystallinity and narrowing the OBG.     

A Jitter Injection Signal Generation and Extraction System for Embedded Test of High-Speed Data I/O

An instrument for on-chip measurement of transceiver transmission capability is described that is fully realizable in CMOS technology and embeddable within an SoC. The instrument can be used to inject and extract the timing and voltage information associated with signals in high-speed transceiver circuits that are commonly found in data communication applications. At the core of this work is the use of ΣΔ amplitude- and phase-encoding techniques to generate both the voltage and timing (phase) references, or strobes used for high-speed sampling. The same technique is also used for generating the test stimulant for the device-under-test.     

Formal probabilistic analysis of a surgical robot control algorithm with different virtual fixtures

Surgical robots are increasingly being used in operation theaters involving normal or laparoscopic surgeries. The working of these surgical robots is highly dependent on their control algorithms, which require very rigorous analysis to ensure their correct functionality due to the safety-critical nature of surgeries. Traditionally, safety of control algorithms is ensured by simulations, but they provide incomplete and approximate analysis results due to their inherent sampling-based nature. We propose to use probabilistic model checking, which is a formal verification method, for quantitative analysis, to verify the control algorithms of surgical robots in this paper. As an illustrative example, the paper provides a formal analysis of a virtual fixture control algorithm, implemented in a neuro-surgical robot, using the PRISM model checker. In particular, we provide a formal discrete-time Markov chain-based model of the given control algorithm and its environment. This formal model is then analyzed for multiple virtual fixtures, like cubic, hexagonal and irregular shapes. This verification allowed us to discover new insights about the considered algorithm that allow us to design safer control algorithms.     

Toxicity and Metabolism of Layered Double Hydroxide Intercalated with Levodopa in a Parkinson’s Disease Model

Layered hydroxide nanoparticles are generally biocompatible, and less toxic than most inorganic nanoparticles, making them an acceptable alternative drug delivery system. Due to growing concern over animal welfare and the expense of in vivo experiments both the public and the government are interested to find alternatives to animal testing. The toxicity potential of zinc aluminum layered hydroxide (ZAL) nanocomposite containing anti-Parkinsonian agent may be determined using a PC 12 cell model. ZAL nanocomposite demonstrated a decreased cytotoxic effect when compared to levodopa on PC12 cells with more than 80% cell viability at 100 μg/mL compared to less than 20% cell viability in a direct levodopa exposure. Neither levodopa-loaded nanocomposite nor the un-intercalated nanocomposite disturbed the cytoskeletal structure of the neurogenic cells at their IC₅₀ concentration. Levodopa metabolite (HVA) released from the nanocomposite demonstrated the slow sustained and controlled release character of layered hydroxide nanoparticles unlike the burst uptake and release system shown with pure levodopa treatment.