Energy and load balancing routing protocol for IoT

Due to the limitation of node energy resources, the management of energy consumption is one of the most important problems of the internet of things (IoT). Therefore, many studies have tried to optimize and manage energy consumption by focusing on different techniques. Although each of these studies has improved and optimized energy consumption, there are many important problems, including maintaining traffic balance and energy consumption of network nodes. Therefore, a new method is necessary to maintain the load and energy balancing of network nodes. Therefore, this paper introduces energy and load balancing routing protocol for IoT (ELBRP) based on the development of the RPL routing protocol and the efficiency of data distribution technique. The ELBRP performance has three steps. In the first step, along with the process of sending DODAG information object (DIO) messages, the status of network nodes is evaluated. In the second step, the DODAG communication graph is formed according to the ELBRP. In the third step, data transmission is done according to the distribution technique with the goal of balancing traffic and energy. The simulation results using cooja simulator showed the superiority of ELBRP in improving energy consumption and successful delivery ratio, reducing delay and increasing the network lifetime compared to the similar methods.     

Observer-based leader-following consensus of one-sided Lipschitz multi-agent systems over input saturation and directed graphs

This paper investigates a local observer-based leader-following consensus control of one-sided Lipschitz (OSL) multi-agent systems (MASs) under input saturation. The proposed consensus control scheme has been formulated by using the OSL property, input saturation, directed graphs, estimated states, and quadratic inner-boundedness condition by attaining the regional stability. It is assumed that the graph always includes a (directed) spanning tree with respect to the leader root to develop matrix inequalities for investigating parameters of the proposed observer and consensus protocols. Further, a new observer-based consensus tracking method for MASs with saturation, concerning independent topologies for communicating outputs and estimates over the network, is explored to deal with a more perplexing and realistic situation. In contrast to the traditional methods, the proposed consensus approach considers output feedback and deals with the input saturation for a generalized class of nonlinear systems. The efficiency of the obtained results is illustrated via application to a group of five moving agents in the Cartesian coordinates.     

Robust Multimodal Biometric System Based on Feature Level Fusion of Optimiseddeepnet Features

Wireless Personal Communications - Multimodal biometric systems combine feature knowledge from multiple traits to overcome shortcomings of unimodal systems. However, most of the traditional...     

Attack Resilient and Efficient Protocol based on Greedy Perimeter Coordinator Routing—Mobility Awareness for Preventing the Attack in the VANET

Wireless Personal Communications - A Greedy Perimeter Coordinator Routing and Mobility Awareness (GPCR-MA) vehicular routing is a widely accepted routing protocol for VANET (Vehicular Ad hoc...     

Pulse current co-deposition of Ni-WS2 nano-composite film for solid lubrication

This study was undertaken to observe the effect of nano-composite coating on steel surface for enhancing its tribological properties. In the investigation, EN31 steel surfaces were coated with nano-composite (Ni-WS₂) by pulse current co-deposition process in order to improve the tribological properties of the surface. The coatings were prepared according to different parameter settings. The effect of variations on coating thickness, microstructure, surface morphology, microhardness and tribological properties was observed. The maximum coating thickness of 117?µm with 8% by weight of WS₂ particle concentration could be attained with the following parameter settings: applied voltage: 5?V; pulse frequency: 20?Hz; WS₂ concentration: 20?g/l; duty factor: 0.6 and bath temperature: 50°C. The average friction coefficient of the deposited surface was 0.11, which is significantly less than that of the EN31 steel surface (average coefficient of friction >?0.5).     

A novel application of micro-EDM process for the generation of nickel nanoparticles with different shapes

This article explains production of nickel nanoparticles through a micro-electrical discharge machining (EDM) process with a combination of different process parameters. The production of nickel nanoparticles was carried out in a dielectric medium (deionized water) with developed micro-EDM while polyvinyl alcohol worked as the stabilizing agent. The characterization of nickel nanoparticle was done by scanning electron microscope (SEM), Energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), UV–Vis spectroscopy, and Fourier transform infrared (FTIR) analysis. From this investigation, the mean crystal size of the nickel nanoparticles was found to be in the range of 15–20?mm for a pulse-on time variation of 2–0.3?µs and the crystal size was found to decrease with the decrease of pulse-on time. It was also observed that with this decrease, the shape and size of nickel nanoparticles change from spherical to needle-like. The dispersion stability of nickel nanofluid was determined by viscosity measurements and the dynamic viscosity was noted to decrease by decreasing the pulse duration. From the FTIR spectrum results, it was confirmed that the synthesized nickel nanoparticles in deionized water were pure and monolithic. UV–Vis–NIR spectroscopy depicted that the band gap energy increases with a reduction in the pulse-on time and obtains a higher band gap (5.31?eV) for 0.3?µs pulse-on time.     

Biosynthesis and characterisation of nano‐silica as potential system for carrying streptomycin at nano‐scale drug delivery

A growing trend within nanomedicine has been the fabrication of self‐delivering supramolecular nanomedicines containing a high and fixed drug content ensuring eco‐friendly conditions. This study reports on green synthesis of silica nanoparticles (Si‐NPs) using Azadirachta indica leaves extract as an effective chelating agent. X‐ray diffraction analysis and Fourier transform‐infra‐red spectroscopic examination were studied. Scanning electron microscopy analysis revealed that the average size of particles formed via plant extract as reducing agent without any surfactant is in the range of 100–170 nm while addition of cetyltrimethyl ammonium bromide were more uniform with 200 nm in size. Streptomycin as model drug was successfully loaded to green synthesised Si‐NPs, sustain release of the drug from this conjugate unit were examined. Prolong release pattern of the adsorbed drug ensure that Si‐NPs have great potential in nano‐drug delivery keeping the environment preferably biocompatible, future cytotoxic studies in this connection is helpful in achieving safe mode for nano‐drug delivery.Inspec keywords: silicon compounds, nanofabrication, nanomedicine, drug delivery systems, nanoparticles, X‐ray diffraction, Fourier transform infrared spectra, scanning electron microscopyOther keywords: nanosilica, streptomycin, nanoscale drug delivery, nanomedicine, silica nanoparticles, Azadirachta indica leaves extract, X‐ray diffraction analysis, Fourier transform‐infrared spectroscopy, scanning electron microscopy, cetyltrimethyl ammonium bromide, SiO₂      

Green synthesised zinc oxide nanostructures through Periploca aphylla extract shows tremendous antibacterial potential against multidrug resistant pathogens

To grapple with multidrug resistant bacterial infections, implementations of antibacterial nanomedicines have gained prime attention of the researchers across the globe. Nowadays, zinc oxide (ZnO) at nano‐scale has emerged as a promising antibacterial therapeutic agent. Keeping this in view, ZnO nanostructures (ZnO‐NS) have been synthesised through reduction by P. aphylla aqueous extract without the utilisation of any acid or base. Structural examinations via scanning electron microscopy (SEM) and X‐ray diffraction have revealed pure phase morphology with highly homogenised average particle size of 18 nm. SEM findings were further supplemented by transmission electron microscopy examinations. The characteristic Zn–O peak has been observed around 363 nm using ultra‐violet–visible spectroscopy. Fourier‐transform infrared spectroscopy examination has also confirmed the formation of ZnO‐NS through detection of Zn–O bond vibration frequencies. To check the superior antibacterial activity of ZnO‐NS, the authors'' team has performed disc diffusion assay and colony forming unit testing against multidrug resistant E. coli, S. marcescens and E. cloacae. Furthermore, protein kinase inhibition assay and cytotoxicity examinations have revealed that green fabricated ZnO‐NS are non‐hazardous, economical, environmental friendly and possess tremendous potential to treat lethal infections caused by multidrug resistant pathogens.Inspec keywords: nanomedicine, zinc compounds, II‐VI semiconductors, wide band gap semiconductors, nanoparticles, scanning electron microscopy, X‐ray diffraction, antibacterial activity, transmission electron microscopy, particle size, Fourier transform infrared spectra, ultraviolet spectra, visible spectra, enzymes, biochemistry, molecular biophysics, microorganisms, drugs, toxicology, bonds (chemical), semiconductor growth, nanofabrication, vibrational modesOther keywords: green synthesised zinc oxide nanostructures, Periploca aphylla extract, antibacterial potential, multidrug resistant pathogens, multidrug resistant bacterial infections, antibacterial nanomedicines, P. aphylla aqueous extract, structural examinations, scanning electron microscopy, X‐ray diffraction, pure phase morphology, homogenised average particle size, SEM, transmission electron microscopy, Fourier‐transform infrared spectroscopy, bond vibration frequency, antibacterial activity, disc diffusion assay, colony forming unit testing, S. marcescens, E. cloacae, E. coli, ultraviolet‐visible spectroscopy, protein kinase inhibition assay, cytotoxicity, lethal infections, ZnO