Sex pheromone biology and behavior of the cowpea weevilCallosobruchus maculatus (Coleoptera: Bruchidae)

Female cowpea weevils,Callosobruchus maculatus (F.), emitted a pheromone which excited males. Pheromone release began soon after emergence and continued for one week. Synchronization of pheromone release with calling behavior was demonstrated. Mating reduced pheromone release but not male response. Pheromone obtained by aeration collection was utilized for determining a quantitative dose-response relationship.Mention of a commercial product does not constitute an endorsement by the USDA.Visiting scholar on leave from Shanghai Institute of Entomology, PRC.     

辽化裂解装置技术改造

辽阳石化烯烃厂裂解装置于2001年检修期间，完全采用国内技术，完成了120kt/a乙烯装置扩能改造工作，介绍了装置改造的主要内容和特点，生产运行和考核情况，以及扩能改造存在的问题和解决措施。     

High temperature polymerization of propylene catalyzed by MgCl2‐supported Ziegler–Natta catalyst with various cocatalysts

Four cocatalysts, referred to as ethylaluminoxanes, were synthesized by the reaction between triethylaluminium (AIEt₃) and water under various molar ratios of H₂O/Al at ?78°C. Aluminoxanes were used as cocatalysts for a MgCl₂‐supported Ziegler–Natta catalyst for propylene polymerization at temperatures ranging from 70 to 100°C. When the polymerization was activated by AlEt₃, the activity as well as the molecular weight and isotacticity of the resulting polymer gradually dropped as the temperature varied from 70 to 100°C. When ethylaluminoxane was employed as the cocatalyst, good activity and high molecular weight and isotacticity were obtained at 100°C. Furthermore, when the cocatalyst varied from AlEt₃ to ethylaluminoxane, the atactic fraction and polymer fraction with moderate isotacticity decreased and the high isotactic fraction slightly increased, which indicated that the variation of the cocatalyst significantly affects the isospecificity of active sites. It was suggested that the reactivity of the Al‐Et group and the size of the cocatalyst were correlated to the performance of the Ziegler–Natta catalyst at different temperatures. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1978–1982, 2006     

加压下二氧化碳在二甲基甲酰胺中的溶解度研究

本文报道了二氧化碳在二甲基甲酰胺中的溶解度,实验温度分别为15、20、25、30、35、40、45℃,实验压力为207.21—1684.02kPa.并且提出一个考虑了过量熵的、用溶度参数表示的活度系数方程.     

浅谈电子产品对儿童的影响及对策

在现代社会中,平板电脑、智能手机在人们日常生活的方方面面发挥着巨大的作用。通过分析电子产品在儿童和青少年的视力、身体发育、社交能力和学习能力等方面的负面影响,提出了加强亲子陪伴、合理引导控制等应对措施。     

Study of different effect on foaming process of biodegradable bionolle in supercritical carbon dioxide

Microcellular foaming of biodegradable Bionolle in supercritical CO₂ has been produced. The effects of a series of variable factors, such as saturation temperature, saturation pressure, and depressurization time and step on the foam structures and density, were studied through measurement of density and SEM observation. The experimental results show that higher saturation temperatures lead to an increase in bulk densities; and different depressurization time and step result in different product cell morphology. In addition, at some saturation temperature, the orientation of the cells can be found in the product morphology. XRD experimental results show that the foaming treatment with SC CO₂ increased the crystallinity of Bionolle. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2901–2906, 2006     

Solid state interfacial reactions in electrodeposited Ni/Sn couples

Ni/Sn couples,prepared by sequentially electroplating Ni layers and Sn layers on metallized Si wafers,were employed to study the mierostructures and growth kinetics of Ni-Sn intermediate phases,when the Ni/Sn couples were aged at room temperature or annealed at temperatures from 150 to 225℃for various times.The results show that the NiSn phase and Ni_3Sn_4 phase are formed,respectively,in the aged couples and annealed couples.The Ni_3Sn_4 layer is continuously distributed between the Ni and Sn sides in t...     

Moodle在中澳合作办学项目中的应用

Moodle以其经济性和易用性等特点,已在教育领域中得到广泛应用。浙江科技学院在中澳合作办学项目中,基于Moodle的网络教学平台成了联系中澳双方的纽带,为双方教师及学生参与各种教学活动提供了有效的途径。在分析了Moodle课程管理系统的特点和主要功能模块之后,介绍了Moodle在项目中的实际应用情况,指出了在使用这个教学平台过程中存在的不足。     

强化两相混合的超临界技术制备聚乳酸微粒

针对商品化聚乳酸微球粒径分布较宽难于适用气溶胶给药要求的不足,采用水力空化混合强化超临界流体辅助雾化技术(SAA-HCM)制备聚乳酸(PLA)超细微粒.该技术主要特点是通过在超临界流体和液相进料处引入水力空化混合器,强化两相间的混合.考察SAA-HCM过程混合器压力、温度、沉淀器温度、进料中CO2与液体溶液质量流量比和溶液质量浓度等操作参数对微粒形态和粒径分布的影响,成功制备出球形度较好,粒径分布较窄(1～3μm)的PLA微球.经X射线衍射(XRD)分析和差示扫描量热(DSC)分析显示,与原料PLA相比,微球晶型及热曲线变化不大,但结晶度下降.同时把操作参数与相行为进行关联,探讨了影响颗粒形貌的机理.对比超临界流体辅助雾化法(SAA)的实验结果表明:水力空化的引入能有效强化混合器内的两相传质,混合更好,能制备出适用于气溶胶给药要求的超细微粒.     

仿土质专用肥的开发和应用前景

本文介绍了基于某些名、优农产品在其生长过程中所需要的特定敏感元素,配制出“仿土质”专用肥。经施用证明,肥效显著,经济效益可观,具有推广应用的前景。