用过滤工艺全面提高铸锭质量

探讨了过滤器孔径对6063铝合金铸锭组织和性能的影响规律。在此基础上指出,在过滤工艺恰当时,不仅可以减少铸锭中的夹杂物,而且可以有效地防止裂纹、羽毛晶等连续铸锭中的常见缺陷。     

激光辐照对不同饵料微藻生长的影响

利用Nd:YAG激光(波长1.06μm,功率5W,照射时间0.5-3min)和Ar 激光(波长:488nm,功率70mw,照射时间5-20min)分别照射角毛藻和叉鞭金藻,辐照后进行细胞增殖和生长速率的测定。实验结果表明:照射剂量为1min的Nd:YAG激光及剂量为5min的Ar 激光对叉鞭金藻有较明显的促长效果,这两种激光处理组的细胞增殖量在辐照后的两天内较对照组分别高42.9%和48.1%,但这种促长效果随时间的推移逐渐消失。不同剂量的两种激光辐照角毛藻后,在延滞期均出现生长抑制现象,但进入指数生长期或传代培养后,剂量为1min的Nd:YAG激光及剂量为10min的Ar 激光对角毛藻有明显的促长效果,其中在指数生长期1min剂量的Nd:YAG激光处理可促长27.0%,传代培养后10min的Ar 激光处理组生长速率提高达51.2%。本文对不同激光及不同激光参数条件下,两种饵料藻的耐受性及生长特性的差异也进行分析探讨。本实验结果不仅证实了已有研究的推论,还展示出激光技术在饵料藻种选育中的应用前景。     

内蒙古煤系高岭土作为FCC催化剂基质的研究

研究两种内蒙古煤系高岭土（1^＃、2^＃）的化学组成、晶体结构并与苏州高岭土进行了比较。对三种高岭土进行酸改性，利用BET、吡啶-TPD和微反测试分别研究改性前后高岭土的性能特点。并将内蒙古高岭土1^＃与苏州高岭土采用半合成方法合成了FCC催化剂，测定了其裂化活性。研究结果表明，内蒙古1^＃具有较良好的晶体结构和化学组成，经酸改性后比表面积大大增加，具有合适的孔径分布，裂化活性较好，可以取代苏州高岭土作为FCC催化剂的基质。     

Investigation of texture effect on visual colour difference evaluation

The texture effect on visual colour difference evaluation was investigated in this study. Five colour centers were selected and textured colour pairs were generated using scanned textile woven fabrics and colour‐mapping technique. The textured and solid colour pairs were then displayed on a characterized cathode ray tube (CRT) monitor for colour difference evaluation. The colour difference values for the pairs with texture patterns are equal to 5.0 CIELAB units in lightness direction. The texture level was represented by the half‐width of histogram, which is called texture strength in this study. High correlation was found between texture strength and visual colour difference for textured colour pairs, which indicates that an increasing of 10 units of texture strength in luminance would cause a decreasing of 0.25 units visual difference for the five colour centers. The ratio of visual difference between textured and solid colour pairs also indicates a high parametric effect of texture. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 341–347, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.     

花艺教室：荆丛亦风流

运动的环热烈的爱//圆点示爱//纯洁爱情//心心相印//透过玻璃的美     

安全:爆破工程永恒的主题——2001年重大拆除爆破工程回顾

通过对2001年我国重大拆除爆破工程的回顾,认为在提高大面积毫秒非电起爆网络可靠性,控制爆破震动、扬尘、噪声等环境影响,与机械清理配合,实现快速施工等方面取得了进展与突破;对几起爆破安全事故进行了初步分析.为保证拆除爆破工程安全,在加强理论研究、开展技术创新、建立科学有序的管理制度等方面提出了建议意见.     

吸收雷达波包装材料的研究进展

论述了吸收雷达波包装材料的基本组成及其选择原则，在此基础上讨论了吸波材料的吸波原理及影响吸波性能的因素，并指出了吸波包装材料的开发现状和应用进展及其发展万向。     

实行工程预决算审计 严格控制投资成本

针对目前企业固定资产投资中存在的投资超概算问题 ,论述了实行工程预决算审计的必要性 ,结合江西铜业股份有限公司的实践阐明了如何实行工程预决算审计 ,以达到提高投资效益的目的。     

CSAa黏弹性表面活性剂压裂液的研制

用化学试荆长链烷基季铵盐CSAa制备了两种VES压裂液并研究了相关性能，其组成（CSAa／水杨酸钠／氯化钾／正丁醇，以g／dL为单位）如下：1．0／0．3／1．0／0．2；2．0／0．6／0．5／0．1。在耐温性测定中，1．0g／dL CSAa压裂液的黏度由30℃时的75．0mPa·s降至50℃时的37．5mPa·s；2．0g／dL CSAa压裂液的黏度由40℃时的225mPa·s逐渐降至55℃时的110mPa·s，再降至60℃时的65．0mPa·s.在1701／s剪切2h后，剪切温度为42℃时1．0g／dL CSAa压裂液的黏度下降26％，剪切温度为53℃时2．0g／dL CSAa压裂液黏度下降9％。陶粒沉降速度测定结果表明，40℃、42℃时的1．0g／dL CSAa压裂液（黏度分别为60和54mPa·s）和50℃、53℃时的2．0g／dLCSAa压裂液（黏度分别为180和145mPa·s）携砂性能良好，而45℃、50℃时的1．0g／dLCSAa压裂液和55℃、60℃时的2．0g／dL CSAa压裂液，携砂性能则较差或很差。认为VES压裂液的携砂性能来源于棒状胶束网络，并不全由压裂液黏度决定。还考察了VES压裂液的破胶性能。图1表2参5。     

Influence of phosphorus element on direct laser sintering of multicomponent Cu-based metal powder

This article presents a detailed investigation on the influence of the phosphorus element upon the laser sintering of a multicomponent Cu-based metal powder system consisting of Cu, Cu-10Sn, and Cu-8.4P. Powder systems containing 0, 10, 15, and 20 wt pct CuP were sintered in atmosphere at room temperature using the following optimal processing parameters: laser power of 350 W, scan speed of 0.04 m/s, scan line spacing of 0.15 mm, and layer thickness of 0.25 mm. It was found that the relative density of the sintered sample with 15 wt pct CuP increased by 24,4 pct as compared with the sample without phosphorus addition. A further increase in the CuP content (≥20 wt pct), however, resulted in a poor densification with a serious delamination. The exact metallurgical roles of the phosphorus element in the laser sintering process were addressed as follows. First, the phosphorus could prevent the sintering system from oxidation by forming CuPO₃, thereby improving the wetting characteristics and the sintering kinetics. Second, the phosphorus could decrease the surface tension of molten materials, leading to a successive transition from highly discontinuous sintered tracks to fairly coherent ones with increasing the phosphorus content. Third, the phosphorus could lower the melt viscosity, thereby improving the microstructural homogeneity of the laser-sintered samples.