An automatic thin-film thickness indicator implemented with a Z-80 microcomputer

An automatic display of thin-film thickness during vacuum deposition based on Z-80 microcomputer is demonstrated. The film thickness can be displayed directly in nm during deposition whenever a key is touched. The maximum deposition thickness and the measuring accuracy can be easily adjusted by loading a proper time constant to channels 0 and I of the counter-timer-circuit.     

The barrier height change and current transport phenomena with the presence of interfacial layer in MIS Schottky barrier solar cells

In this comprehensive study, several interesting results which are different from those previous are reported. We find the barrier height decreases for n-type and increases for p-type when positive ions are introduced into the insulating layer. The increase of open circuit voltage can be traced to the suppression of the dark saturation current by the depletion field induced by the positive charge, and to the diminution of the majority tunneling current by the oxide potential barrier. The tunneling probabilities for majority and minority carriers are different; there are only a finite amount of majority carriers with thermionic energy greater than q(V_bi ? V_s) which can surmount the depletion potential and tunnel into the metal, whereas the photogenerated minority carriers derive kinetic energy in the depletion layer making tunneling easier. Transport coefficients for electrons to transmit from metal to semiconductor and from semiconductor to metal are different for the departure of built in potentials during illumination.     

Structural analysis of triacylglycerols and edible oils by near-infrared Fourier transform Raman spectroscopy

Fourier transform Raman spectroscopy was employed for structural analysis of triacylglycerols and edible oils. Raman spectra sensitively reflected structural changes in oils. Even slight structural fluctuation between triacylglycerols and free fatty acids led to obvious differences in Raman bands as shown by C-O-C stretching from 800 to 1000 cm(-1) and the band at 1742 cm(-1). Structural difference in geometric isomers was easily distinguished as proved by C = C stretching at 1655 cm(-1) (cis) shifting to 1668 cm(-1) (trans) and by =C-H in-plane bending at 1266 cm(-1) in cis disappearing in the trans isomer. Raman intensity at 1266, 1302, and 1655 cm(-1) changed concomitantly with the change of double-bond content in oils. It showed that FT-Raman was capable of precisly reflecting the content of double bonds in oils. A linear correlation with high consistency between the Raman intensity ratio (v1655/v1444) and the iodine value was obtained for commercial oils. Based on the results, FT-Raman spectroscopy proved itself a simple and rapid technique for oil analysis since each measurement could be directly completed in 3 min without any sample modifications.     

Optimal resilient threshold GQ signatures

GQ signature scheme is widely used in many cryptographic protocols, such as forward-secure signature scheme, identity-based signature scheme, etc. However, there is no threshold version of this important signature scheme in the open literature. We proposed the first threshold GQ signature scheme. The scheme is proved unforgeable and robust against any adaptive adversary by assuming hardness of computing discrete logarithm modulo a safe prime and existence of fully synchronous broadcast channel. Furthermore, with some modifications, our scheme achieves optimal resilience such that the adversary can corrupt up to a half of the players. As an extension of our work, we provided a threshold identity-based signature scheme and a threshold forward-secure signature scheme, which is the threshold version of the most efficient forward-secure signature scheme up to now.     

Strength prediction of multi-layer plain weave textile composites using the direct micromechanics method

Previously developed micromechanical methods for stiffness and strength prediction are adapted for analysis of multi-layer plain weave textile composites. Utilizing the direct micromechanics method (DMM) via finite element modeling, three methods are presented: (a) direct simulation of a multi-layer plain weave textile composite; (b) micromechanical analysis of a single layer of interest from the force and moment resultants acting on that layer; and (c) application of the previously developed quadratic stress-gradient failure theory to the layer of interest. In comparison to direct modeling, the other two techniques show only 5% difference over a number of random test cases. Several practical design examples of strength prediction are included to illustrate the importance and accuracy of method implementation.     

The n-type Ge photodetectors with gold nanoparticles deposited to enhance the responsivity

Gold nanoparticles (AuNPs) have been deposited on n-type Ge photodetectors to improve the responsivity. Two different coverage ratios, including 10.5 and 30.3% of AuNPs have been prepared, and the fabricated photodetectors are compared with the control sample. The 1,310-nm responsivities at -2 V of the control, 10.5% AuNPs, and 30.3% AuNPs samples are 465, 556, and 623 mA/W, respectively. The AuNPs could increase the responsivities due to the plasmon resonance. The reflectance spectra of these samples have been measured to verify that plasmon resonance contributes to the forward scattering of incident light. The reflectance decreases with AuNP deposition, and a denser coverage results in a smaller reflectance. The smaller reflectance indicates more light could penetrate into the Ge active layer, and it results in a larger responsivity.     

New hybrid COPRAS-G MADM Model for improving and selecting suppliers in green supply chain management

Greening the supply chain is an increasingly important concern for many business enterprises and a challenge for logistics management. Critical functions within green supply chain management are internal improvements and selection of green suppliers. This study proposes a novel, hybrid model that addresses dependent relationships between various criteria and the vague information coming from decision-makers. The Decision-making Trial and Evaluation Laboratory (DEMATEL) technique structures the relationships among criteria, thereby constructing an influential network relationship map (INRM). Meanwhile the DEMATEL-based, analytical network process (ANP) method aids in obtaining influential weights of the criteria. Decision-makers may hold diverse opinions and preferences due to incomplete information, differences in knowledge or simply conflicts that are inherent between various departments. This can make it difficult to judge the performance of alternatives. One remedy is to apply a modified COmplex PRoportional ASsessment of alternatives with Grey relations. Next, this is applied to improve each criterion for integration of the performance values obtained in closing the aspiration level from different expert opinions based on INRM. An empirical example using data from a Taiwanese electronics company is provided to demonstrate our proposed method. The results can provide firms with a knowledge-based understanding of the source of some problems, thus reducing the performance gaps and closing the aspiration levels. Finally, there is a discussion on certain managerial implications.     

NUMERICAL INVESTIGATION OF HEAT TRANSFER UNDER CONFINED IMPINGING TURBULENT SLOT JETS

This work numerically in vestigates confined impinging turbulent slot jets. Eight turbulence models, including one standard and seven low-Reynolds-number k-epsilon models, are employed and tested to predict the heat transfer performance of multiple impinging jets. Validation results indicate that the prediction by each turbulence model depends on grid distribution and numerical scheme used in spatial discretization. In addition, spent fluid exits are set between impinging jets to reduce the cross-flow effect in degradation of the heat transfer of downstream impinging jets. The overall heat transfer performance can be enhanced by proper spent fluid removal.     

Oxygen saturation-dependent effects on blood transverse relaxation at low fields

Objective

Blood oxygenation can be measured using magnetic resonance using the paramagnetic effect of deoxy-haemoglobin, which decreases the \(\textit{T}_{2}\) relaxation time of blood. This \(\textit{T}_{2}\) contrast has been well characterised at the \(\textit{B}_{{0}}\) fields used in MRI (1.5 T and above). However, few studies have characterised this effect at lower magnetic fields. Here, the feasibility of blood oximetry at low field based on \(\textit{T}_{2}\) changes that are within a physiological relevant range is explored. This study could be used for specifying requirements for construction of a monitoring device based on low field permanent magnet systems.

Methods

A continuous flow circuit was used to control parameters such as oxygen saturation and temperature in a sample of blood. It flowed through a variable field magnet, where CPMG experiments were performed to measure its \(\textit{T}_{2}\). In addition, the oxygen saturation was monitored by an optical sensor for comparison with the \(\textit{T}_{2}\) changes.

Results

These results show that at low \(\textit{B}_{{0}}\) fields, the change in blood \(\textit{T}_{2}\) due to oxygenation is small, but still detectable. The data measured at low fields are also in agreement with theoretical models for the oxy-deoxy \(\textit{T}_{2}\) effect.

Conclusion

\(\textit{T}_{2}\) changes in blood due to oxygenation were observed at fields as low as 0.1 T. These results suggest that low field NMR relaxometry devices around 0.3 T could be designed to detect changes in blood oxygenation.

     

Effects of additives on the electrodeposition of tin from an acidic Sn(II) bath

Additive effects of formaldehyde, propionaldehyde and benzaldehyde on the deposition of tin in acidic solution of tin(II) sulfate have been investigated. The effects of these additives on cathodic polarization and a.c. impedance was measured by galvanostatic or potentiostatic methods, respectively. The reduction products of the aldehyde during the deposition and the diffusion coefficient of Sn(II) in various solutions were also determined.