Fabrication and Pore Size Control of Large-Pore Mesoporous Silica Particles through a Solvent Evaporation Process

Large-pore mesoporous silica particles were synthesized through a solvent evaporation process using hydrophobic fumed silica particles and tetraethyl orthosilicate (TEOS) as silica sources. The solvent evaporation of an ethanol solution of fumed silica particles, TEOS, HCl and triblock copolymer (F127) resulted in mesoporous silica particles with pores with sizes of about 7 nm. In addition, the interplanar spacing of the mesoporous silica particles can be controlled by changing the solvent evaporation temperatures.     

Disorders and oxygen vacancies in p-type Sn2B2O7 (B = Nb,Ta): Role of the B-site element

Sn₂Nb_2−xTa_xO₇ (x = 0.0–2.0) with pyrochlore structure is a promising material for p-type oxide semiconductors. A systematic study of its Nb/Ta ratio indicated that the hole–generation efficiency of the Nb end (Sn₂Nb₂O₇) was an order of magnitude lower than that of the Ta end (Sn₂Ta₂O₇). Although this occurs due to differences in oxygen-vacancy formation, the origins of the hole–generation efficiencies remain unclear due to limited information on local and global crystal-structure disorders in pyrochlore Sn₂Nb₂O₇ and Sn₂Ta₂O₇. In this study, the crystal structures of Sn₂B₂O₇ (B = Nb, Ta), composed of BO₆ octahedra and Sn₄O tetrahedra, were investigated using X-ray absorption spectroscopy and X-ray diffraction. A detailed investigation of the local and global crystal structures indicated a larger amount of disorder in the Sn₄O tetrahedra in Sn₂Nb₂O₇ compared to Sn₂Ta₂O₇; disorder in the BO₆ octahedra occurred only in Sn₂Ta₂O₇. This study indicates that an appropriate selection of the B-site element is vital for suppressing defect and disorder formation in Sn₄O tetrahedra and subsequently improving the hole–carrier–generation efficiency.     

Mixed powder coating film using thermoplastic polyester and its alkaline resistance

To improve alkaline resistance, a newly mixed powder coating film using thermoplastic polyethylene terephthalate (PET) was investigated. Two kinds of polyvinyl butyral (PVB) and two kinds of polyamide (PA) were chosen as the secondary polymer. The melting temperatures (T _ms) of these materials were lower than that of primary PET polymer so the mixed powder coating was able to form a dual phase film through a fluidized bed coating process. Microscope and Fourier transform infrared spectroscopy (FTIR) observations revealed that the dual phase structure was indeed successfully formed and there was a secondary layer over the entire surface area of the film. This mixed powder coating film significantly enhanced the alkaline resistance to an environment filled with NaOH solution at 40°C in which a secondary material would be effective in protecting the film. With regard to both alkaline resistance and film formability, PET/PVB was superior to the PET/PA mixture.     

Rheological properties of ethylene ionomer neutralized with binary metal cation

The roles of ionic bonding in molten ethylene ionomers without ionic aggregates were rheologically characterized in linear regions under shear. We have measured melt viscosities of ethylene-methacrylic acid (EMAA) ionomers by means of dynamic shear experiment. The samples used in this study were binary mixtures selected from Na, Mg and Zn salts of EMAA (MAA=5.4 mol%). The dynamic shear properties revealed that the time-material superposition is applicable to these ionomer blends in a temperature range from 140 to 200 °C. It was also found that these binary mixtures unexpectedly give decreases of zero shear viscosities obtained from a time-material superposition, if the cations were selected from different metal groups such as alkali, alkaline earth and transition metals. This behavior can be explained by the acid-cation exchange mechanism.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Wear resistance of a Cr3C2-NiCr detonation spray coating

Coatings can be applied to surfaces to improve the surface characteristics over those of the bulk properties and are widely used in tribological applications either to reduce wear and/or to modify friction during contact. One of the foremost coating methods for combating wear is thermal spraying. To prolong the life of steel slab continuous casting rolls, Cr₃C₂-NiCr detonation spray coating was processed on the roll surface in a steelmaking plant in China. This article studies the mechanical properties and wear resistance of this coating. The abrasive and dry frictional wear testing were performed using a pin-on-disk tester. Experimental results show that the wear resistance of the coated samples, i.e., coating reduces the risk of seizure compared to uncoated samples, is much better than those of the uncoated steel at room and elevated temperatures with any load and sliding velocity. The coating wear mechanisms under different test conditions are discussed.     

Growth features of crystals in laser‐welded aluminium and aluminium alloys

In the present work, the increase in the basicity index of the slag system of the flux, represented by the ternary system of MnO–SiO₂–CaO oxides, is evaluated. The increment of the basicity index is performed by the addition of CaO, keeping the MnO/SiO₂ percentage relation of the system constant, in order to evaluate the behaviour of the chemical composition resulting from the metal deposited by SAW. As a result, it is possible to intensify the Mn transfer to the deposited metal and at the same time attenuate that of the Si, S, P and the carbon remains basically unalterable. All this makes it possible, in combination with low-manganese wire, to obtain similar results to those obtained with fluxes of lower basicity in combination with medium manganese wires.     

Evaluation of MPN method combined with PCR procedure for detection and enumeration of Vibrio parahaemolyticus in seafood

Vibrio parahaemolyticus densities in spiked and naturally contaminated seafood samples were enumerated by the MPN method combined with a PCR procedure (MPN-PCR method) targeting the species-specific thermolabile hemolysin gene (tlh), and by the MPN method using subcultivation of alkaline-peptone-water (APW) enrichment culture on thiosulfate-citrate-bile-sucrose (TCBS) agar (MPN-TCBS method). In the samples spiked with both V. parahaemolyticus and V. alginolyticus, the numbers of V. parahaemolyticus enumerated by the MPN-PCR method were similar to, or higher than the numbers of spiked cells, whereas those enumerated by the MPN-TCBS method were below the numbers of spiked cells. In naturally contaminated seafood samples, the numbers of V. parahaemolyticus enumerated by the MPN-PCR method were higher than those by the MPN-TCBS method. In the case of the MPN-TCBS method, isolation of V. parahaemolyticus from some APW cultures was difficult because of the overgrowth of many colonies other than V. parahaemolyticus (e.g., V. alginolyticus) on TCBS agar. In contrast, the PCR technique could detect tlh from APW culture without isolation of V. parahaemolyticus, so the possibility of failing to obtain a positive result in APW culture by the MPN-PCR method was considered to be lower than that by the MPN-TCBS method. Furthermore, utilization of the PCR technique reduces the time and labor required for the biochemical identification tests used in the MPN-TCBS method. For the detection and enumeration of V. parahaemolyticus in seafood, especially for samples that show many colonies other than V. parahaemolyticus on TCBS agar, the MPN-PCR method may be more convenient and reliable than the MPN-TCBS method.     

A Scheduling Protocol for Continuous Media Data Broadcasting With Large-Scale Data Segmentation

Due to the recent popularization of mobile multimedia broadcasting, broadcasting continuous media data such as audio and video has attracted great deal of attention. In general continuous media data broadcasting, since clients have to wait to receive data before playing it, various schemes to reduce waiting time have been studied. Some reduce the waiting time by dividing the data into several segments and broadcasting preceding segments frequently with a single channel. However, by dividing the data into numerous segments and producing an effective broadcast schedule, the waiting time can be further reduced. In this paper, we propose a scheduling protocol to reduce waiting time with large-scale data segmentation.