Low-temperature sintering of ZrW2O8–SiO2 by spark plasma sintering

Amorphous ZrW₂O₈ powder and amorphous SiO₂ powder were prepared by a sol–gel process as raw materials, and high-density ZrW₂O₈–SiO₂ were successfully prepared at a much lower temperature of 923 K for a much shorter holding time of 10 min by spark plasma sintering (SPS) method rather than by conventional melt-quenching method. The relative densities of 0.85ZrW₂O₈–0.15SiO₂ and 0.70ZrW₂O₈–0.30SiO₂ were 99.4% and 96.6%, respectively. The combined technique of a sol–gel process and SPS should enable us to prepare the varied types of high-density composites of ZrW₂O₈ without severe thermal cracking caused by melt-quenching. The thermal expansion properties and dielectric properties of ZrW₂O₈–SiO₂ were also investigated.     

15.1% Highly efficient thin film CdS/CdTe solar cell

High-efficiency CdS/CdTe solar cells with thin CdS film have recently been developed. Semiconductive layers of CdS via the CVD method and of CdTe via the CSS method were deposited on an ITO/#7059 substrate. Cell performance depends primarily on the thickness of CdS film, and the conversion efficiency is highest for a CdS film thickness of around 60 nm. Since the CdS film thickness decreases by about 30% during deposition of the CdTe layer, a thickness of 95 nm is required to obtain a 60 nm-thick CdS film after deposition of a CdTe layer. By observing the CdS film during the CdTe deposition process, a decrease was detected before CdTe layer completely covers the surface of the CdS film. By optimizing the thickness of CdS film, an efficiency of 15.12% for the best cell under AM 1.5 verified at JQA was obtained. This fabrication process has good reproducibility; 92.5% of 1 cm² solar cells fabricated under the same conditions have efficiencies above 14%.     

Cross-sectional transmission electron microscopy of ZnO tetrapod-like particles

ZnO tetrapod-like particles having legs as long as several tens of micrometers have been observed by cross-sectional electron microscopy. The specimen is prepared by a new method where a photo-resist suspension of the particles fills up holes of an electron microscopy grid and is solidified for the subsequent ion-milling. Electron diffraction and high-resolution electron microscopy of a section of a ZnO tetrapod reveal the orientation relationship among its four legs, which enables us to discuss on the growth mechanism of these particles.     

Striking sequence similarity in inter- and intra-specific comparisons of class I SLG alleles from Brassica oleracea and Brassica campestris: implications for the evolution and recognition mechanism

Self-incompatibility in Brassica is controlled by a single multi-allelic locus (S locus), which contains at least two highly polymorphic genes expressed in the stigma: an S glycoprotein gene (SLG) and an S receptor kinase gene (SRK). The putative ligand-binding domain of SRK exhibits high homology to the secretory protein SLG, and it is believed that SLG and SRK form an active receptor kinase complex with a self-pollen ligand, which leads to the rejection of self-pollen. Here, we report 31 novel SLG sequences of Brassica oleracea and Brassica campestris. Sequence comparisons of a large number of SLG alleles and SLG-related genes revealed the following points. (i) The striking sequence similarity observed in an inter-specific comparison (95.6% identity between SLG14 of B. oleracea and SLG25 of B. campestris in deduced amino acid sequence) suggests that SLG diversification predates speciation. (ii) A perfect match of the sequences in hypervariable regions, which are thought to determine S specificity in an intra-specific comparison (SLG8 and SLG46 of B. campestris) and the observation that the hypervariable regions of SLG and SRK of the same S haplotype were not necessarily highly similar suggests that SLG and SRK bind different sites of the pollen ligand and that they together determine S specificity. (iii) Comparison of the hypervariable regions of SLG alleles suggests that intragenic recombination, together with point mutations, has contributed to the generation of the high level of sequence variation in SLG alleles. Models for the evolution of SLG/SRK are presented.     

Effects of locally administered argatroban on restenosis after balloon angioplasty: experimental and clinical study

1. This study was undertaken to evaluate the preventive effects of locally administered argatroban, a competitive inhibitor of thrombin-induced platelet activation, on restenosis after balloon angioplasty. 2. A hydrogel-coated balloon catheter was immersed three times in argatroban/saline solution (1 mg/mL) for 60 s, inflated to a pressure of 606 kPa and left in the rabbit common carotid artery for 1 min. The same procedure was performed, without drug, as a control. The pharmacokinetics of delivered argatroban in the arterial wall were assessed using [14C]-argatroban. Platelet deposition 2 h after balloon injury was quantified by fluorescence studies using antiplatelet antibody. Vascular smooth muscle cell (VSMC) proliferation 3 days after balloon injury was assessed by immunohistochemical staining for proliferative cell nuclear antigen (PCNA). In a clinical study, we divided 50 elective patients into two groups: argatroban and control. 3. In the experimental study, the mean quantities of argatroban at 0, 2 and 6 h after deflation were 24.63, 0.49 and 0.11 nmol/g wet weight of artery, respectively. Argatroban was undetected 24 h after deflation. Two hours after deflation, argatroban-treated arteries showed less platelet adhesion than saline-treated controls. The mean number of PCNA-positive cells was 16.9 and 43.8% in the argatroban and control groups, respectively (P < 0.01). In the clinical study, the mean late gain loss was 8.2 and 27.3% in the argatroban and control groups, respectively (P < 0.05). The mean late restenosis rate was 11.1 and 41.4% in the argatroban and control groups, respectively (P < 0.05). 4. These data suggest that blood coagulation plays a significant role in VSMC proliferation after balloon injury and that locally administered argatroban using hydrogel-coated balloon catheter may prevent post-percutaneous transluminal coronary angioplasty restenosis.     

Inhibition of skeletal muscle sarcoplasmic reticulum Ca2+-ATPase by nitric oxide

The effects of nitric oxide on the activities of thapsigargin-sensitive sarcoplasmic reticulum Ca2+-ATPase (SERCA) and Ca2+ uptake by sarcoplasmic reticulum (SR) membranes prepared from white skeletal muscle of rabbit femoral muscle were studied. Pretreatment of the SR preparations with nitric oxide at concentrations of up to 250 microM for 1 min decreased the SERCA activity concentration dependently, and also decreased their Ca2+ uptake. Both these effects of nitric oxide were reversible. Inhibitors of guanylyl cyclase and protein kinase G (PKG) had no significant effect on the nitric oxide-induced inhibitions of SERCA and Ca2+ uptake. Moreover, dithiothreitol did not reverse the inhibitory effects of nitric oxide on SERCA and Ca2+ uptake. These findings suggest that nitric oxide inhibits SERCA, mainly SERCA 1, of rabbit femoral skeletal muscle by an action independent of the cyclic GMP-PKG system or oxidation of thiols, and probably by a direct action on SERCA protein.     

Identification of alternative splicing form of Stat2

Three cases of pulmonary leiomyosarcoma were presented. The characteristic clinical features were described with review of literature. In comparison with bronchogenic carcinoma, the leiomyosarcoma has some characteristics: 1) On chest X-ray, it usually appears as a sharply demarcated, even density round mass, growing rapidly within the lung, it rarely accompanies with hilar or mediastinal lymph node metastasis. 2) The preoperative cytological or pathological diagnosis is difficult either by sputum smear or by bronchoscopic biopsy or by fine needle percutaneous aspiration biopsy. 3) Pathological differential diagnosis of leiomyosarcoma of lung from anaplastic lung cancer is difficult. In conclusion, the primary pulmonary leiomyosarcoma is a rare malignant tumor, detecting the present illness seriously, paying attention to the chest X-ray films characterize, early surgical resection is the only way to get diagnosis and effective treatment method.     

Lattice corneal dystrophy type II associated with familial amyloid polyneuropathy type IV

BACKGROUND: Finnish-type familial amyloidosis (FAP-IV) is an autosomal, dominantly inherited disorder characterized by progressive polyneuropathy and lattice corneal dystrophy type II. The vast majority of families with this disorder originated from Finland. Only two families, in neighboring districts, have been reported in Japan previously. METHODS: The authors report two additional Japanese patients with FAF-IV. The proband, a 70-year-old man, had decreased perspiration and abnormal facial muscle movement. Results of neurologic examination showed bilateral facial and hypoglossal nerve palsies, and an autonomic disturbance, including orthostatic hypotension and dysfunction of perspiration. Histochemical, immunohistological, and DNA studies confirmed the diagnosis of FAP-IV. RESULTS: Results of ophthalmologic examination showed asymptomatic lattice corneal dystrophy of both eyes, but the appearance of the cornea was different from that described in the patients from Finland. Lattice lines in the authors' patient were very fine, short, and glassy and could be observed with indirect retroillumination, but might be missed with direct illumination by the slit-lamp microscope. The proband's younger half-sister, a 68-year-old woman, showed clinical findings and laboratory data similar to those of the proband. CONCLUSION: The authors report two Japanese patients with lattice corneal dystrophy type II related to FAP-IV. This is the third Japanese family with this disorder, and there is no familial relationship to the two previously reported families in Japan.     

Pharmacokinetic re-evaluation and phase I study of high dose epirubicin in advanced non-small cell lung cancer

We performed a phase I trial to evaluate the toxicity and the maximum tolerated dose of high dose epirubicin on a three-consecutive-day schedule on Japanese patients with advanced non-small cell lung cancer. Fourteen patients were entered in the study. At least three patients were assigned to each different dose level. Epirubicin was given intravenously daily for three day by bolus injection. The dose was started at 60 mg/m2/course and escalated by 30 mg/m2/course. Granulocytopenia was found to be the dose limiting toxicity with a maximum tolerated dose of 150 mg/m2/course. Thrombocytopenia and non-hematological toxicities were mild and well tolerated. The maximum tolerated dose was lower than that in Europe and Canada. Partial responses were observed in two out of five patients on 150 mg/m2/course. The recommended phase II dose for high dose epirubicin was demonstrated to be 120 mg/m2/course. A further dose-escalating study of epirubicin in conjunction with the administration of granulocyte colony stimulating factor is scheduled for the determination of its antitumor activity in non-small cell lung cancer.     

Morphology and rotation twin in ZnSe on GaAs (111)

ZnSe crystals were grown by a vapour transport method on a GaAs substrate with a (111) A or (¯1¯1¯1) B surface. Crystals obtained on the (111) A surface of the substrate were fine crystals and hexagonal plates. Whereas crystals grown on the (¯1¯1¯1) B were uniform thin films on which trigonal hills and trigonal pyramids developed. These crystallites had a complicated morphology. In addition, the hill and pyramid grown on the (¯1¯1¯1) B surface contained rotation twins around a polar axis parallel to the growth direction or around the other polar axes.