Evaluation of a mirror-polishing technique for fluorocarbon polymer surfaces for reduction of contamination from containers used in ultratrace analysis

A mirror-polishing technique for fluorocarbon polymer surfaces using high-precision diamond cutting tools was developed. The goal of this technique was the reduction of ultratrace elemental analysis contamination levels of containers fabricated from such mirror-polished materials. Remarkably smooth inner surfaces with degrees of flatness of 0.1 μm peak-to-valley (PTV) for containers fabricated from mirror-polished PTFE materials were obtained, in contrast to degrees of surface flatness of more than 30 μm PTV for commercially available PTFE containers. (Here, PTV denotes the difference between the highest peak and deepest valley in a scanned area of 10 × 10 μm.) Extractable impurity levels for mirror-polished PTFE container surfaces were reduced by more than 1 order of magnitude relative to those of unpolished PTFE containers. The surface conditions of the PTFE containers were observed by atomic force and scanning electron microscopy. The microphotographs so obtained suggest that the degree of surface smoothness of the containers is proportional to their ultratrace metallic contamination levels.     

Gait motion for naturally curving variously shaped corners

Modeling the curving motion of humans in actual environment is rarely done because of the complexity and variability of the turning motion. In this study, various gait motions, including straight, round corner, and circular walks, were recorded and analyzed using factor analysis. As a result, we successfully extracted several factors that represent turning motions, such as long stride motion, turning motion led by the inner leg, and turning motion led by the outer leg. In particular, we found that the natural curving motion, which is a motion that results when turning around a round corner, is widely and continuously distributed on the factor space. Although several typical stepping strategies were reported by related studies, we found that the stepping motion changes between straight and turning gaits in the factor space during natural curving motions. Thus, the classification of curving motion into several typical distinct stepping patterns is probably insufficient to understand the natural curving motion. Furthermore, natural curving motions that comprise circular curving motions that were believed to represent typical curving motions was not validated. On the other hand, this result also suggests the possibility of generating curving motions for a physical assistant robot by combining straight gait and circler curving motion.     

Orthotropic material orientation optimization method in composite laminates

This paper proposes a optimization method that is capable of simultaneous design of multiple layers in a composite laminate with respect to multiple objective functions. The optimization process obtains a continuous orientation of an orthotropic material for each layer of the laminate. Each layer by itself is a single design domain, which allows multiple domains to be stacked in various orientations. Multiple optimization objectives are considered resulting in layers that perform different functions. The layers are modeled within a three-dimensional structure and by discretizing the structure using three-dimensional elements, the interaction between individual layers can be modeled. This also allows the optimization method to obtain a three-dimensional orientation vector. In this study, the individual layers are assumed to be thin, limiting the orientation vector to the mid-plane of the layer. The optimization model is tested on a two-layer laminate in which one layer is optimized for thermal control by directing heat toward specified sections while shielding other sections and the second layer is optimized to reduce the total deformation of the laminate structure that results from the thermal load. The results of simultaneous optimization for both layers are shown for several different configurations of boundary conditions.     

Pulse‐width modulation with current uniformization for AM‐OLED micro‐displays on Si LSI chips

We have developed pulse‐width modulation (PWM) with current uniformization for active‐matrix organic light‐emitting diode (AM‐OLED) micro‐displays on Si large‐scale integration (LSI) chips. This driving method can simultaneously solve luminance unevenness and image sticking due to characteristic deviations and degradations of driving transistors and OLEDs. With the use of circuit simulation, it is verified that the PWM with current uniformization (PWM‐CU) can simultaneously achieve precise gray scale and exceedingly improve luminance uniformity. Moreover, an actual panel is designed and fabricated, where the OLEDs are layered on the Si LSI chip. It is found that the luminance uniformity can be improved within 2% to 3%. It is meaningful that the correct images can be displayed using the PWM‐CU for the first time for AM‐OLED micro‐displays on Si LSI chips.     

Rhombic‐Shaped Nanostructures and Mechanical Properties of 2D DNA Origami Constructed with Different Crossover/Nick Designs

DNA origami methods enable the fabrication of various nanostructures and nanodevices, but their effective use depends on an understanding of their structural and mechanical properties and the effects of basic structural features. Frequency‐modulation atomic force microscopy is introduced to directly characterize, in aqueous solution, the crossover regions of sets of 2D DNA origami based on different crossover/nick designs. Rhombic‐shaped nanostructures formed under the influence of flexible crossovers placed between DNA helices are observed in DNA origami incorporating crossovers every 3, 4, or 6 DNA turns. The bending rigidity of crossovers is determined to be only one‐third of that of the DNA helix, based on interhelical electrostatic forces reported elsewhere, and the measured pitches of the 3‐turn crossover design rhombic‐shaped nanostructures undergoing negligible bending. To evaluate the robustness of their structural integrity, they are intentionally and simultaneously stressed using force‐controlled atomic force microscopy. DNA crossovers are verified to have a stabilizing effect on the structural robustness, while the nicks have an opposite effect. The structural and mechanical properties of DNA origami and the effects of crossovers and nicks revealed in this paper can provide information essential for the design of versatile DNA origami structures that exhibit specified and desirable properties.     

Reliability-based topology optimization under shape uncertainty modeled in Eulerian description

Structural and Multidisciplinary Optimization - This paper presents a reliability-based topology optimization method under geometrical uncertainties. First, we briefly introduce the concept of...     

Scalability and homogeneity of slot die‐coated metal oxide semiconductor for TFTs

An indium oxide‐based precursor solution has been developed by spin coating method. In order to apply this material to mass production, material, process, and equipment optimizations for slot die coating have been implemented. Slot die coating is a cost‐effective and scalable process and already applied to photoresist materials in the display industry. The indium oxide‐based precursor solution has been coated on bare glasses and thin‐film transistor substrates by a mass production‐type slot die coater. Mobility of over 10 cm²/Vs is achieved for the first time for a large area at an annealing temperature of 350 °C. The homogeneity of the film will be presented.     

Shape and topology optimization based on the convected level set method

The aim of this research is to construct a shape optimization method based on the convected level set method, in which the level set function is defined as a truncated smooth function obtained by using a sinus filter based on a hyperbolic tangent function. The local property of the hyperbolic tangent function dramatically reduces the generation of red the error between the specified profile of the hyperbolic tangent function and the level set function that is updated using a time evolution equation. In addition, the small size of the error facilitates the use of convective reinitialization, whose basic idea is that the reinitialization is embedded in the time evolution equation, whereas such treatment is typically conducted in a separate calculation in conventional level set methods. The convected level set method can completely avoid the need for additional calculations when performing reinitialization. The validity and effectiveness of our presented method are tested with a mean compliance minimization problem and a problem for the design of a compliant mechanism.