A FAST METHOD OF RADIATIVE HEAT TRANSFER ANALYSIS BETWEEN ARBITRARY THREE-DIMENSIONAL BODIES COMPOSED OF SPECULAR AND DIFFUSE SURFACES

The radiation element method by ray emission model (REM²) has been improved by using the law of reciprocity for the specular view factor and the incomplete Cholesky conjugate gradient (ICCG) method to reduce computational time. This improved method was applied to analyze the radiative heat transfer between arbitrary three-dimensional bodies composed of specular and diffuse surfaces. The accuracy of the improved method was evaluated by comparing analytical solutions. And the method was used to calculate radiative heat transfer between machine elements and heater panels. CPU time to calculate the radiative exchange for a model composed of 3193 elements was reduced to 1/430 of that by the previous numerical method using a decomposition method.     

Phase structure in the blend of atactic poly(vinyl alcohol) with atactic poly(vinyl alcohol‐block‐vinyl acetate)

An almost fully saponified atactic poly(vinyl alcohol) and an atactic poly(vinyl alcohol‐block‐vinyl acetate) of which degree of saponification is 89 mol % were blended by a solution casting method. The phase structure of the blend film was analyzed by optical microscopy, ¹³C‐NMR, and differential scanning calorimetry. The most remarkable structure of the blend was composed of cylindrical domains penetrating the film. The swelling behavior of the blend films was also investigated in the dimethylsulfoxide and water mixed solvents to find differences in solubility and diffusion behavior between the matrix and the domain. The cylindrical domains could be selectively dissolved away in water and the film became porous. We tried to change the size of the cylindrical domain with various film preparation conditions. This aimed to turn the film into the useful filter membrane. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1807–1815, 2002     

Reduction of return current noise by energy‐compensating active control

A newly proposed energy‐compensating active control is implemented to reduce the return current noise which is caused by inverter‐driven electric car systems. The energy‐compensating active control detects the energy charged at the filter capacitor, and reduces the energy and current of the noise frequency component by simple feedback loop incorporated with the conventional motor torque controller. No additional sensors or circuit arrangements are necessary; therefore, the return current can be attenuated effectively without any further cost. The return current with an inverter system is measured using a current probe and an FFT analyzer, and it is shown that the 25‐Hz noise current is reduced by up to 10 dB with the control. The results reveal that the low‐frequency return current noise can be attenuated with the simple control scheme, which would expectedly reduce the size of filter reactors and capacitors to meet the current limit level of the signaling system's track relays. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 165(4): 84–91, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20615     

Mobility and distribution of cadmium, nickel and zinc in contaminated soil profiles from Bangladesh

We investigated the mobility and distribution of cadmium (Cd), nickel (Ni) and zinc (Zn) in four contaminated soil profiles from Bangladesh. The sources of contamination of these profiles were tannery wastes, city sewage and the wastes of pharmaceutical and paper mill factories at different locations in Bangladesh. The samples were collected from the A-, B- and C-horizons of each profile: two sub-samples from the A-horizon at depths of 0–5 cm (A1) and >5 cm (A2), and one sample each from the B- and C-horizons. Soil samples were analysed for total metal content by dissolution in aqua regia followed by sequential extraction of the fractions based on their varying solubility. There were six operationally defined groups of extraction sequences: water soluble (F1), exchangeable (F2), carbonate (F3), oxide (F4), organic (F5) and residual (F6). The total concentration of Cd, Ni and Zn in the A-horizon (0–5 cm) ranged from 0.10 to 0.62, from 31 to 54 and from 85 to 838 mg kg⁻¹, respectively. In the B- and C-horizons, the concentrations of these metals decreased many fold, particularly in the city sewage profile where the decrease for Cd and Zn was approximately fourfold. The distribution of metals among the chemical fractions depended on their total concentrations. In the A1-horizon, Cd had the highest mobility factor [MF = (F1+F2+F3)/(F1+F2+F3+F4+F5+F6) × 100] at 41–43% and Ni had the lowest at 3–13%, while Zn, showed intermediate values at 8–25%. The MF decreased with depth in all soil profiles. Among the fractions, the residual fraction contained the lowest levels of Cd but the highest levels of Ni and Zn. This state affected their relative mobility and distribution in soil profiles. Of the soil profiles, the mobility of all metals was higher in the city sewage soil than in any of the other three soils investigated, suggesting that the former may create a health risk by contaminating agricultural products and ground water as it also contained higher amounts of Cd and Zn.     

Study on the determination of pesticide residues in crops by ion-trap GC/MS/MS

Ion-trap GC/MS/MS was evaluated for the multi-residue determination of pesticides in agricultural products. Matrices were extracted from samples (spinach, carrot, onion and brown rice) with acetone and submitted to gel permeation chromatography, followed by a clean-up step through a graphite carbon cartridge. Thirty-five pesticides were added to either matrix, and analyzed by GC/MS/MS. Detection limits of pesticides by GC/MS/MS was almost the same as those by GC/MS (SIM). Coefficients of variation of peak area in 5 measurements of each pesticide at 0.1 microgram/mL or 0.05 microgram/mL with or without matrices were mostly acceptable, though those of 20 pesticides out of 35 were higher than 10% at a concentration of 0.02 microgram/mL. It was indicated that matrix artifacts, which interfere with GC/MS-Scan analysis, could be eliminated in some cases by using GC/MS/MS.     

The effect of the N-linked glycans on structural features and physicochemical functions of soybean β-conglycinin homotrimers

β-Conglycinin is a trimeric protein consisting of three subunits, α,α′,and β, which are N-glycosylated. The α and α′ subunits contain extension regions in addition to core regions common to all subunits. We purified homogeneous trimers consisting of only α, α′, or β from mutant soybean cultivars containing β-conglycinin lacking one or two subunits: α homotrimers from an α′-lacking mutant, α′ homotrimers from an α-lacking mutant, and β homotrimers from an α-and α′-lacking mutant. Structural features and physicochemical functions of the three homotrimers were examined and compared with those of recombinant homotrimers having no N-linked glycans. The native homotrimers have secondary structures very similar to those of the recombinant ones. In analogy with the recombinant homotrimers, the native ones exhibit different thermal stabilities from one another (β>α′>α), and the native α and α′ homotrimers exhibit better solubility, emulsifying ability, and heat-induced association than the native β homotrimer. Further, the N-linked glycans contribute to solubilities of the three subunits at low ionic strength (μ=0.08) and to the emulsifying ability of the native β homotrimer. N-Linked glycans also prevent heat-induced associations of the native α and α′ homotrimers but do not contribute to the secondary structure and the thermal stability of β-conglycinin.     

New type of pressurized cultivation method providing oxygen for piezotolerant yeast

For efficient oxygen supply to pressurized culture, we developed a method using a highly pressurized membrane reactor with an air-saturated medium circulation system. The new method increased the cell growth of aerobic yeast approximately 20 folds larger than that in the case of using a conventional method.