Dynamic behaviour of a ring subjected to time-dependent fluid pressures

A dynamic stress analysis is carried out for a ring filled with a fluid subjected to the transient inner pressure resulting from an explosion in the vicinity of its center. The relationships between hydraulic pressures and stresses in a ring and time are investigated due to an impulsive force which is assumed to be a step function in time. The fundamental equations of motion for a fluid and a ring are solved by the Laplace transformation method. From the results of the theoretical analysis, it becomes evident that the direct stresses acting in a ring in the circumferential direction become extremely large.     

Four-point probe resistance measurements using PtIr-coated carbon nanotube tips

We performed four-terminal conductivity measurements on a CoSi2 nanowire (NW) at room temperature by using PtIr-coated carbon nanotube (CNT) tips in a four-tip scanning tunneling microscope. The physical stability and high aspect ratio of the CNT tips made it possible to reduce the probe spacing down to ca. 30 nm. The probe-spacing dependence of resistance showed diffusive transport even at 30 nm and no current leakage to the Si substrate.     

Synthesis of KTiOPO4 (KTP) Thin Films Using Metallo-organics

Crack-free and highly transparent KTiOPO₄ (KTP) thin films were synthesized by the sol-gel method using a homogeneous precursor solution prepared from ("BuO)₂-P(O)(OH), Ti(OEt)₄, and KOEt in EtOH. Precipitated powders from the solution crystallized directly to KTP above 550°C. Polycrystalline KTP thin films were obtained at 600°C on various substrates. On NdAlO₃(100) substrates, KTP films with (101) and (240) preferred orientations were formed at 600°C. KTP films on glass substrates showed a refractive index of 1.75 and an absorption edge of 350 nm. KTP films exhibited the second harmonic generation of the 532 nm light on irradiaton with 1064 nm light.     

A general model-based approach to two-dimensional infrared correlation spectroscopy incorporating the global phase angle

We describe a theoretical framework for a model-based approach to two-dimensional correlation spectroscopy that is generally applicable to any arbitrary model function. The method is based on the correlation between spectral data and a set of model waveforms with a varying correlation index, the global phase angle Theta. When experimental spectral intensity variations are expressed as sinusoidal, exponential, Lorentzian, or quadratic functions, the proposed approach allows us to estimate the quantitative values of the target parameters in those expressions. In addition, this method enables us to assess the sequential order in a series of bands undergoing non-identical intensity changes in a dynamic data set. We present both simulated and experimentally obtained data that illustrate that the deviations from linearity of the absorption band intensity waveforms are clearly detected and can be quantitatively estimated using quadratic functions.     

Room-temperature miscibility gap in LixFePO4

The rechargeable lithium-ion cell is an advanced energy-storage system. However, high cost, safety hazards, and chemical instability prohibit its use in large-scale applications. An alternative cathode material, LiFePO(4), solves these problems, but has a kinetic problem involving strong electron/hole localization. One reason for this is believed to be the limited carrier density in the fixed monovalent Fe(3+)PO(4)/LiFe(2+)PO(4) two-phase electrode reaction in LixFePO4. Here, we provide experimental evidence that LixFePO4, at room temperature, can be described as a mixture of the Fe(3+)/Fe(2+) mixed-valent intermediate LialphaFePO4 and Li1-betaFePO4 phases. Using powder neutron diffraction, the site occupancy numbers for lithium in each phase were refined to be alpha=0.05 and 1-beta=0.89. The corresponding solid solution ranges outside the miscibility gap (0相似文献   

Sphingomyelinase C from Streptomyces sp. A9107: Unusual primary structure for bacterial sphingomyelinase C

A sphingomyelinase C (SMase) was identified in the culture supernatant of Streptomyces sp. A9107 (S-SMase). Although S-SMase seems to be a typical bacterial SMase, the primary structure of S-SMase was unusual for known bacterial SMase. The gene was functionally overexpressed in the culture medium of recombinant Rhodococcus erythropolis.     

Difference of histology and elemental composition of the cervical enamels among human permanent teeth

The purpose of this study is to clarify the difference of histology and elemental composition of the cervical enamels among the human permanent teeth. The re-ground surfaces at the cervical enamels of them were observed under scanning electron microscopy (SEM). The contents of seven elements were analyzed quantitatively with electron probe microanalyzer (EPMA). The widths of the rod sections at the cervical enamels were larger than those at the cuspal enamels. The rod sections at the mesial cervical enamels in the incisors were more obscure and more decayed by acid solution than those in the premolars and molars. The calcium and phosphorus contents of the cervical enamels were significantly lower than those of the cuspal enamels. The carbon content of the cervical enamels was significantly higher than that of the cuspal enamels. The calcium and phosphorus contents of the cervical enamels were the significantly highest in the premolars. The carbon and sodium contents of the cervical enamels were significantly highest in the premolars. It is thought that the calcification level is lower, while the content of organic matter is higher at the cervical enamels than those at the cuspal enamels. It is considered that the sodium causes high calcification.     

Correlation between the electro-optical Kerr effect and physical parameters of nematogens

The relationship between the Kerr effect in an isotropic phase in the vicinity of phase transition temperature (T_NI) from isotropic to nematic phase and material parameters of the nematogens has been investigated. We could conclude that a strong correlation was confirmed between the Kerr constant in the vicinity of T_NI and the material parameters; the larger Kerr effect was observed in the prepared nematogen that also had larger product value of Δn × Δε × K₃₃/K₁₁, which can be useful knowledge for designing novel nematogens with high Kerr constant.     

Mammalian Cytochrome P450-Dependent Metabolism of Polychlorinated Dibenzo-p-dioxins and Coplanar Polychlorinated Biphenyls

Polychlorinated dibenzo-p-dioxins (PCDDs) and coplanar polychlorinated biphenyls (PCBs) contribute to dioxin toxicity in humans and wildlife after bioaccumulation through the food chain from the environment. The authors examined human and rat cytochrome P450 (CYP)-dependent metabolism of PCDDs and PCBs. A number of human CYP isoforms belonging to the CYP1 and CYP2 families showed remarkable activities toward low-chlorinated PCDDs. In particular, human CYP1A1, CYP1A2, and CYP1B1 showed high activities toward monoCDDs, diCDDs, and triCDDs but no detectable activity toward 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-tetraCDD). Large amino acids located at putative substrate-recognition sites and the F-G loop in rat CYP1A1 contributed to the successful metabolism of 2,3,7,8-tetraCDD. Rat, but not human, CYP1A1 metabolized 3,3'',4,4'',5-pentachlorobiphenyl (CB126) to two hydroxylated metabolites. These metabolites are probably less toxic than is CB126, due to their higher solubility. Homology models of human and rat CYP1A1s and CB126 docking studies indicated that two amino acid differences in the CB126-binding cavity were important for CB126 metabolism. In this review, the importance of CYPs in the metabolism of dioxins and PCBs in mammals and the species-based differences between humans and rats are described. In addition, the authors reveal the molecular mechanism behind the binding modes of dioxins and PCBs in the heme pocket of CYPs.     

Cementation of Sands Due to Microbiologically-Induced Carbonate Precipitation

In this study, microbial precipitation of carbonate was observed using high microbial urease activity, and it was found that the ratio of Mg/Ca affected the types of crystals produced. Without Mg²⁺, calcite was produced using only CaCl₂, while the presence of Mg produced Mg-calcite, magnesite and/or possibly dolomite of round, spherical or fibrous shapes, depending on reaction time, pH and Mg/Ca ratio. The carbonate produced contributed to the development of cementation for sands. The presence of Mg showed a relatively strong cementation of the carbonate.