A rod matrix compensator for small-field intensity modulated radiation therapy: a preliminary phantom study

A compensator made of a tungsten-based rod matrix has been proposed for small-field intensity modulated radiation therapy. The compensator was attached to a 6 MV linac gantry head. The proposed compensator could modulate the X-ray intensity with a step of 10% and a minimum transmission of 2.5%.     

Rocket-triggered lightning experiments on zinc oxide arresters and their applications to power transmission lines

In measurements of rocket-triggered lightning current and voltage performed between 1986 and 1995 on the mountain top of Okushishiku in the Kanazawa area, the authors succeeded in artificially inducing winter lightning to arresters. Using the data obtained from those measurements, we analyzed the energy absorption characteristics of surge arresters, such as are installed on every transmission line tower for three phrases, by EMTP. The energy withstand capability of an individual arrester was verified to be approximately the same as the expected value. The analysis results for the energy share of each arrester connected in parallel showed that the usual light duty arresters installed on every tower have the possibility to be able to absorb extreme winter lightning energy even if the lightning hits the power line directly. © 1998 Scripta Technica. Electr Eng Jpn, 122(4): 25–33, 1998     

Efficient use of frequencies in terrestrial ISDB system

Requirements for a terrestrial ISDB system and the schemes for efficiently using frequencies to fulfil the requirements are discussed. One requirement of a terrestrial ISDB system is the efficient allocation of frequencies using a SFN (single frequency network). The SFN incorporates the great advantages of OFDM, which has excellent performance under multi-path conditions. The transmission characteristics of 64QAM-OFDM and the SFN capability using 64QAM-OFDM in the Kanto area, including the Tokyo metropolitan area, are analyzed. The results show that more than a 97% coverage ratio can be obtained even by using a single channel while the same area is covered currently by more than 30 analog channels. The other requirement is a scheme for efficiently using the available frequency band for various services. A transmission scheme concept called BST-OFDM (band segmented transmission-orthogonal frequency division multiplexing) is proposed as a transmission scheme for meeting the requirements of a terrestrial ISDB system. In the BST-OFDM scheme, data are transmitted in a number of OFDM blocks called a BST-segment, for which channel coding and modulation schemes can be independently defined to provide robustness in the transmission environment according to stationary, portable and mobile reception     

DX centers in AlxGa1-xAs bulk alloy,AlAs/GaAs ordered,and disordered superlattices

Properties of theDX centers in Al_0.5Ga_0.5As bulk alloy (b-AL), (AlAs)₂ (GaSa)₂ ordered superlattice (o-SL) and (AlAs) _m (GaAs) _n disordered superlattice (d-SL) (m = 1, 2, 3,n = 1, 2, 3) with the same macroscopic composition were measured and compared. By deconvolution of deep level transient spectroscopy (DLTS) spectrum due to theDX center, we have found a decrease in the number of separate peaks in DLTS spectrum in an intentionally atomic ordered arrangement. Visiting Scholar of the Japan Society for the Promotion of Science. On leave from Department of Electrical Engineering, San Jose State University, San Jose, California 95192-0084, USA.     

Oscillation spectra in He-Zn II and He-Cd II hollow cathode metal vapor lasers

This paper reports the measurement for the oscillation spectra in He-Zn II lasers at the 492.4 nm line and He-Cd II lasers at the 533.7 and 537.8 nm lines of the hollow cathode (HC) type with natural zinc or cadmium. The oscillation width of these lasers, which amounts to more than 2000 MHz, is unexpectedly broad in comparison with the theoretical gain profile; and the isotope shifts of the spectra which are caused by any two isotopes whose mass numbers differ by unity (DeltaM = 1) can be estimated to be as much as 300-500 MHz to explain such a broadened oscillation width. The dominant reason for the large isotope shifts is not so much the mass effects as the volume effects. The behavior of the spectra at the axial mode competition is also measured. The extraordinary appearances of the mode competition can be attributed to the influence of the isotope shifts upon the oscillation spectra. Moreover, the axial mode separation at the beginning of the mode competition is nearly coincident with the decay rate of the upper laser level.     

Mode coupling effects in stress-applied single polarization fibers

Mode coupling effects caused by waveguide imperfections and ambient fluctuations in the stress-applied single polarization fibers have been investigated. Several origins of mode coupling, such as: 1) core deformations, 2) deformation of stress-applying parts, 3) micro-bending, and 4) temperature fluctuations, have been treated. The mode coupling parameters between the orthogonally polarized HE11modes are compared for various kinds of waveguide imperfections and ambient fluctuations. It was clarified that the deformation of the stress-applying parts is the dominant factor in the mode coupling effects in stress-applied single polarization fibers.     

Two-wave sum-frequency light generation in optical fibers

The generation of phase-matched two-wave sum-frequency light has been observed in optical fibers. A Nd:YAG laser by simultaneous mode-locking andQ-switching or onlyQ-switching operation is used as a pump laser. The input power dependence and fiber length dependence of the sum-frequency light are investigated in the two pumping methods. The observed coherence length for the sum-frequency light generation is about 200 m.     

Mobility calculation of two-dimensional electron gas in GaAs/AlGaAs heterostructure at 4.2 K

Electron concentration and undoped AlGaAs spacer thickness dependencies of the mobility of a two-dimensional electron gas in a GaAs/AlGaAs single heterostructure are calculated at 4.2 K. The results predict extremely high electron mobility in this structure and agree quite well with very recent experimental data.     

Preparation of Ba2YCu3O7-δ Thin Films with Preferred Orientation through an Organometallic Route

Superconducting Ba₂YCu₃O_7-δ thin films were prepared through an organometallic route. Single-phase Ba₂YCu₃O_7-δ thin films with preferred orientation were successfully prepared on SrTiO₃ (100) single-crystal substrates at 800°C by a dip coating method using partially hydrolyzed Ba-Y-Cu organometallic solutions. Preferentially oriented Ba₂YCu₃-O_7-δ thin films were also prepared on MgO (100) substrates. By controlling the partial hydrolysis conditions, a coating solution for precursor thin films was kept accurately at the stoichiometric composition. The use of ozone gas during the pyrolysis of the precursor thin films was found to suppress the formation of BaCO₃. Ba₂YCu₃O_7-δ thin films with c -axis orientation perpendicular to a SrTiO₃ (100) substrate, which were heat-treated at 900°C for 15 min, exhibited a superconductivity transition with an onset of 90 K and an end of 75 K.