Digestion of crosslinked poly(vinylpyridinium halide) by activated sludge,and application to make poly(methyl methacrylate) biodegradable by incorporation of a pyridinium group into the main chain

Crosslinked poly(N-benzyl-4-vinyipyridinium bromide) has been found to be digested by activated sludge obtained from sewage works. As an extension of this work, the authors attempted to make poly(methyl methacrylate) biodegradable by incorporation of a pyridinium group. Poly(methyl methacrylate) containing a small amount of N-benzyl-4-vinylpyridinium chloride in the main chain showed remarkable reduction in molecular weight and gravimetric weight when placed in an aeration tank of a sewage works. Molecular weight reduction by activated sludge was more conspicuous when content of the pyridinium group was larger and the original molecular weight before the biological treatment was lower. Since insoluble pyridinium-type polymer captures microbial cells alive, this biodegradation appears to be facilitated by enhancement of affinity of the synthetic hydrophobic polymer with cells of microogranisms. © 1994 John Wiley & Sons, Inc.     

Synthesis and properties of bismaleimide resins containing ether bonds

New bismaleimides containing ether bonds were prepared. The thermal properties of the bismaleimides were investigated by differential scanning calorimetry (DSC). The effects of structure of the bismaleimides and curing conditions on the thermal and mechanical properties of the cured resins such as initial decomposition temperature (T_d), glass transition temperature (T_g), and flexural strength were studied. The introduction of ether bonds to bismaleimide resins decreased the brittleness of the resins without reductions in their heat-resistant properties.     

Void formation in a filled SBR rubber determined by small-angle X-ray scattering

Two commercial styrene-butadiene (SBR) latexes were used to prepare a model filled material consisting of glassy SBR filler particles about 1000 Å in diameter embedded in a rubbery SBR matrix crosslinked by γ-radiation. When transparent specimens of this material were extended, voiding occurred, as evidenced by stress whitening and greatly enhanced X-ray scattering intensity. More voids were formed at higher rates of extension, but voids disappeared when specimens were relaxed. The effects of filler content and cure time of the matrix on the size and number of voids formed were determined by low-angle X-ray scattering for a constant extension rate and a constant extension ratio λ = 1.6. The number of voids measured by X-ray scattering intensity decreased rapidly with time over the 3-h period of measurement. The number of voids remaining 1 h after extension increased about 40 times as filler content was increased from 15% to 50%. Increasing the cure time from 24 to 96 h increased the number of voids about four times. In contrast, the radius of gyration of the voids formed (250–350 Å) did not depend strongly on time, nor did it depend strongly on the filler content or the cure time of the matrix. Stress relaxation measurements made under the same conditions as X-ray scattering measurements showed effects typical of filled materials. However, the relaxation of stress (which followed a power law decay) was much slower than the decay of the number of voids as measured by X-ray scattering intensity.     

Polymorphic behavior of gondoic acid and phase behavior of its binary mixtures with asclepic acid and oleic acid

Molecular properties of polymorphic forms of gondoic acid [cis-C_20:1Δ11ω9 (GOA)] have been studied by X-ray diffraction (XRD), differential scanning calorimetry (DSC), optical microscopy, and Raman scattering, in comparison to those of six principal unsaturated fatty acids: oleic acid [cis-C_18:1Δ9ω9 (OA)], erucic acid [cis-C_22:1Δ13ω9 (ERA)], petroselinic acid [cis-C_18:1Δ6ω12 (PSA)], asclepic acid [cis-C_18:1Δ11ω7 (APA)], palmitoleic acid [cis-C_16:1Δ9ω7 (POA)], and elaidic acid [trans-C_18:1Δ9ω9 (ELA)]. In addition, phase behavior of binary mixtures of GOA and APA and OA was examined by XRD and DSC. The polymorphic structures of GOA are quite similar to those of APA, ERA, POA, and partly to OA. In particular, DSC and Raman scattering studies have shown that gondoic acid exhibits conformational disordering on heating at the ω-chain, a chain segment between the double bond and CH₃ group, as a transition from all-trans (γ form) to gauche-rich (α form) conformations. A miscible mixing phase was observed in the mixture of GOA and APA, yet eutectic phases were observed in the GOA and OA mixtures. This is a remarkable contrast because the binary mixture systems of varying combinations of cis-unsaturated fatty acids examined so far exhibited either eutectic nature or molecular compound formation. It is expected that specific molecular interactions between GOA and APA that originate from the equivalence of the length of the Δ-chain, the chain segment between the cis-double bond and COOH group, and also from the presence of the γ-α order-disorder transformation would be operating to form the miscible mixing phase.     

Performance of solvothermally prepared Ga2O3-Al2O3 catalysts for SCR of NO with methane

The solvothermal reaction of mixtures of aluminum isopropoxide (AIP) and gallium acetylacetonate (Ga(acac)₃) directly yielded the mixed oxides of γ-Ga₂O₃-Al₂O₃. In the solvothermal synthesis, the crystal structure of mixed oxides was controlled by the initial formation of γ-Ga₂O₃ nuclei. The mixed oxides prepared in diethylenetriamine have extremely high activities for selective catalytic reduction (SCR) of NO with methane as a reducing agent. With increasing crystallite size of the spinel structure, the catalytic activity increased. The ratio of the amount of methane consumed by combustion to total methane conversion was proportional to the density of acid sites on the surface of the mixed oxides. The mixed oxide catalysts prepared in diethylenetriamine had lower densities of acid sites and showed a higher methane-efficiency for CH₄-SCR than those prepared in other solvents. These catalysts maintained their high activity even when the reaction was carried out under the severe conditions (i.e., high space velocity and low NO concentration).     

Nondestructive determination of fatty acid composition of husked sunflower (Helianthus annua L.) seeds by near-infrared spectroscopy

Determination of the fatty acid composition of sunflower (Helianthus annua L.) seeds by near-infrared (NIR) spectroscopy was examined. Sunflower seeds were husked (removed from their hulls by a husking machine or manually with a knife). NIR spectra of these seeds were scanned from 1100 to 2500 nm at 2-nm intervals in a whole-grain cell with a wideangle moving drawer for machine-husked seeds or in a single-grain cup for a manually husked single-grain seed. The extracted oils from machine-husked seeds also were scanned by sandwiching them between a pair of slide glasses to create a thin layer and by placing them on a syrup cup. For extracted oil, the absorption band around 1720 nm filled out to the shorter wavelength region in the NIR second-derivative spectra as the percentage of the linoleic acid moiety increased, because linoleic acid absorbs in this region. On the other hand, for husked seeds and for a single-grain seed, as the percentage of linoleic acid increased, the trough at 1724 nm where oleic and saturated acids absorb decreased in the second-derivative NIR spectra. Determination of the fatty acid composition of sunflower seeds could be carried out successfully according to the NIR spectral pattern for both extracted oil (r=−0.989) and kernel seed (r=−0.993). This is important, especially for a manually husked single-grain seed (r=−0.971), because it can still be germinated after such nondestructive analysis.     

Skeletonized hybrid liposomes

Summary Giant hybrid liposomes of polymerizable lipid and cholesterol were prepared by the hydration method and were polymerized by UV irradiation. The obtained giant liposomes were freeze-dried and washed with chloroform to skeletonize the frame structure of the polymerized membrane. The skeletonized liposomes were directly confirmed by scanning electron microscopy. The single-layered and fully spherical liposome frame were easily confirmed by the stereo-pair of the obtained micrographs.     

Characterizing image quality of autostereoscopic displays by using the maximum luminance at each viewing position

A metric of the 3D image quality of autostereoscopic displays based on optical measurements is proposed. This metric uses each view's luminance contrast, which is defined as the ratio of maximum luminance at each viewing position to total luminance at that position. Conventional metrics of the autostereoscopic display based on crosstalk, which uses “wanted” and “unwanted” lights. However, in case of the multiple‐views‐type autostereoscopic displays, it is difficult to distinguish exactly which lights are wanted lights and which are unwanted lights. This paper assumes that the wanted light has a maximum luminance at the good stereoscopic viewing position, and the unwanted light also has a maximum luminance at the worst pseudo‐stereoscopic viewing position. By using the maximum luminance that is indexed by view number of the autostereoscopic display, the proposed method enables characterizing stereoscopic viewing conditions without using wanted/unwanted light. A 3D image quality metric called “stereo luminance contrast,” the average of both eyes' contrast, is proposed. The effectiveness of the proposed metric is confirmed by the results of optical measurement analyses of different types of autostereoscopic displays, such as the two‐view, scan‐backlight, multi‐view, and integral.     

Upper and lower critical solution temperatures in poly (ethylene glycol) solutions

Upper and lower critical solution temperatures have been determined for solutions of poly(ethylene glycol) in t-butyl acetate and water over the molecular weight range of M_η = 2.18 × 10³ to ～1020 × 10³. The phase diagram for solutions of poly(ethylene glycol) (M_η = 719 × 10³) in t-butyl acetate was expressed as the ‘hour glass’ type, while the phase diagram for solution of poly(ethylene glycol) (M_η = 2.18 × 10³ to ～2.29 × 10³) in water was expressed as the ‘closed loop’ type. The value of the pressure dependence of the lower critical solution temperature $\text{(}\text{d}\text{T}\text{d}\text{P}\text{)}{}_{\mathrm{c}}$ in the poly(ethylene glycol) (M_η = 1020 × 10³)/water system over the pressure range of 0 to ～50 atm was negligibly small and positive.