Poly(ethylene terephthalate)/poly(ethylene glycol‐co‐1,3/1,4‐cyclohexanedimethanol terephthalate)/clay nanocomposites: Mechanical properties,optical transparency,and barrier properties

Poly(ethylene terephthalate) (PET)/clay, PET/poly(ethylene glycol‐co‐1,3/1,4‐cyclohexanedimethanol terephthalate) (PETG), and PET/PETG/clay nanocomposites were fabricated using the twin‐screw extrusion technique. The spherulitic morphologies, thermomechanical, mechanical, and gas‐barrier properties, as well as the effect of clay on the transparency of the resulting nanocomposites were identified. The clay induced the heterogeneous nucleation of the nanocomposites during the cold crystallization process, thereby increasing the crystallinities and melting temperatures of the resulting nanocomposites. The incorporation of clay increased the storage moduli, Young's moduli, impact strengths, and barrier properties of the PET, PETG, and PET/PETG blend. Regarding the optical transparency, the inclusion of clay can make the crystallizable PET matrix crystalline opaque. However, the amorphous PETG maintained its transparency. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39869.     

Gas Chromatography with Flame Ionization Detection of 1,4-Dioxane in Palm-Based Fatty Alcohol Ethoxylates

During the ethoxylation of fatty alcohol, 1,4-dioxane, a toxic by-product may be formed. A simple and rapid method using gas chromatography with a flame ionization detector was developed for detection of 1,4-dioxane in commercial palm-based fatty alcohol ethoxylate (FAEO). The method involved spiking the 1,4-dioxane into FAEO samples, and directly injecting the spiked samples into GC with no clean-up steps. The method was validated in terms of linearity, accuracy, intra-day precision and inter-day precision, selectivity, limit of detection and limit of quantification. In terms of linearity, a calibration curve with a correlation coefficient of 0.9999 was obtained. The accuracy of the method was indicated by recovery obtained for spiked 1,4-dioxane samples at 5 levels of spiking, i.e. at 30, 60, 100, 200 and 500 μg/g, where recoveries were within 99–105 % with relative standard deviation (RSD) of <4.0 %. The RSD values of the intra-day and inter-day precision were <1.0 %. The limit of detection and quantification was 10 and 30 μg/g, respectively. The selectivity of the method was indicated by its ability to analyze commercial FAEO samples with different average moles of ethylene oxide (EO). The GC profiles of these FAEO with varying numbers of moles of EO were similar, and there were no other peaks interfering with the 1,4-dioxane peak.     

昆明住宅冬季室内环境状况调查分析

室内环境问题是21世纪研究的重点和热点.为此,2004年笔者对一百余户家庭进行了“关于昆明市冬季室内环境状况”的问卷调查和室内温湿度现场测试,调查数据显示冬季昆明室内温度15℃左右,相对湿度56.3%RH,超过半数的居住者对冬季住宅室内环境状况感觉满意和无所谓.     

Temperature Change of Light Induced Explosion of explosive material

A theoretical analysis based on the adiabatic consideration of one- dimensional model for initiation of explosive materials by intense light is performed. An expression is obtained which can be used to calculate the explosion temperature.     

Glass Additive Influence on the Sintering Behaviors,Magnetic and Electric Properties of Bi–Zn Co‐Doped Co2Y Ferrites

The Bi₂O₃–B₂O₃–ZnO–SiO₂ (BB35SZ) glass effects on the sintering behavior and magnetic properties of Bi–Zn co‐doped Co₂Y ferrites were investigated in developing low‐temperature‐fired ferrites. The results indicate that BB35SZ glass can be used as a sintering aid to reduce the densification temperature of Co₂Y ferrites from 1300°C to 900°C. The 2(Ba_0.9Bi_0.1O)·2(Zn_0.4Co_0.4Cu_0.2O)·6(Fe_1.97Zn_0.03O₃) ferrite with 4 wt% BB35SZ glass can be densified below 900°C, exhibiting an initial permeability of 3.4 and quality factor of 55. This process provides a promising candidate for multilayer chip magnetic devices for microwave applications.     

Two‐dimensional electrolyte nature of exfoliated montmorillonite nanoplatelets fabricated by soap‐free emulsion polymerization and their affinity for cations

Montmorillonite (MMT) nanoplatelets, fabricated by the exfoliation of MMT during participating in the soap‐free emulsion polymerization of methyl methacrylate, were well‐dispersed in water and performed like a two‐dimensional electrolyte. Their ionic conductivity roughly follows the Manning's limiting law for the conduction of a polyelectrolyte. The dissociated MMT nanoplatelets that carry negative charges in water were able to rapidly adsorb cations, such as tris(2,2′‐bipyridyl)ruthenium(II) (Ru(bpy)) and methylene blue (MB⁺), and recover into a smectic configuration floating as a separating phase. By using the Langmuir equation, we were able to estimate the occupied surface areas of MMT nanoplatelets by each Ru(bpy) and MB⁺ cations as 4.708 and 1.806 nm²/ion, respectively. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

鉴别煤成气和油型气若干指标的初步探讨

鉴别煤成气和油型气的普遍性标志初步认为有:1.煤成气的甲烷碳同位素(δ¹³C₁)一般比油型气的重:在Ro≤0.5%,煤成气和油型气δ¹³C₁除-55‰至-74‰是重迭数域值外,当δ¹³C₁<-74‰为油型气型生物成因气;在Ro>0.5%至-2.5%时,δ¹³C₁-43‰至-30‰是煤成气与油型气重迭数域值,故δ¹³C₁≤-43‰至-55‰的气是油型气;而δ¹³C₁>-30‰的气是煤成气。2.煤成气中的汞蒸气比油型气的一般含量高。煤成气中平均汞含量一般在700毫微克/米³以上,多数大于1000毫微克/米³,而油型气中平均汞含量在600毫微克/米³以下,多数小于400毫微克/米³;煤成气中最高含汞量一般大于1000毫微克/米³,而油型气中的一般小于700毫微克/米³。3.当Ro为0.4%至1.35%时,一个含油层系形成以气为主以油为辅,这种气是煤成气。4.在与Ro0.4%至1.0%有成因关系的气中,若普遍见到凝析油,这种气是煤成气。     

A Low-Power Fullband 802.11a/b/g WLAN Transceiver With On-Chip PA

A low-power fullband 802.11a/b/g WLAN transceiver in 0.15-mum CMOS technology is described. The zero-IF transceiver achieves a receiver noise figure of 4.4/4 dB for the 2.4-GHz/5-GHz bands, respectively. The corresponding sensitivity at 54-Mb/s operation is -72 dBm for 802.11g and -74 dBm for 802.11a using actual PER measurement. An on-chip PA delivers 20 dBm output P1-dB. A new I/Q compensation scheme is implemented in local oscillator (LO) and an image rejection of better than 52 dB is observed. The transmitter delivers 10/1.5 dBm (2.4-/5-GHz) EVM-compliant output power for a 64-QAM OFDM signal at 54-Mb/s. The power consumption is 117/135 mW (1.8-V) in the receive mode and 570/233.1 mW in the transmit mode for 2.4/5 GHz, respectively. The low power consumption, high integration and robustness (-40 to 140degC) make this transceiver suitable for portable applications     

On minimal elements of upward-closed sets

Upward-closed sets of integer vectors enjoy the merit of having a finite number of minimal elements, which is behind the decidability of a number of Petri net related problems. In general, however, such a finite set of minimal elements may not be effectively computable. In this paper, we develop a unified strategy for computing the sizes of the minimal elements of certain upward-closed sets associated with Petri nets. Our approach can be regarded as a refinement of a previous work by Valk and Jantzen (in which a necessary and sufficient condition for effective computability of the set was given), in the sense that complexity bounds now become available provided that a bound can be placed on the size of a witness for a key query. The sizes of several upward-closed sets that arise in the theory of Petri nets as well as in backward-reachability analysis in automated verification are derived in this paper, improving upon previous decidability results shown in the literature.