Synthesis of stable and soluble one-handed helical poly(substituted acetylene)s without chiral pendant groups via polymer reaction in membrane state

A soluble and stable one-handed helical conjugated polymer without the coexistence of any other chiral moieties was successfully synthesized by asymmetric-induced polymerization of a chiral monomer having two hydroxyl groups followed by desubstitution of the chiral groups in a solid membrane state. The reason for the success was the polymer reaction was carried out in the membrane state. This is an alternative method to obtain such a unique chiral polymer which was obtained only by the helix-sense-selective polymerization (HSSP) we reported before. In addition the efficiency of the chiral induction was higher than that of the HSSP. It is interesting that the “Membrane state” acted like as if a protecting group.     

Controlled radical polymerization with polyolefin macroinitiator: a convenient and versatile approach to polyolefin-based block and graft copolymers

This paper introduces the new synthetic methodology of polyolefin-based block and graft copolymers with polar segments [e.g., polystyrene and poly(meth)acrylates]. Various brominated polyolefins were prepared by bromination of polyolefins with N-bromosuccinimide. The resulting brominated polyolefins were able to initiate the controlled radical polymerization of polar monomers, such as methyl methacrylate, ethyl acrylate, t-butyl acrylate, styrene and 2-(dimethylamino)ethyl acrylate, using a CuBr/N,N,N′,N″,N″-pentamethyldiethylenetriamine catalyst system, leading to a variety of polyolefin-based copolymers with a different content of the corresponding polar segment. Because of the accessible synthesis of polyolefin macroinitiators, this synthetic methodology is expected to result in the preparation of a wide range of polyolefin-based block and graft copolymers.     

Insulation characteristics and its evaluation method of N2 gas for nonstandard lightning impulse waveforms

Until recently, SF₆ gas has widely been used as the best insulating medium in substation equipment. However, SF₆ gas was specified to be a greenhouse gas at COP3 in 1997 because of its high global warming potential (GWP), and alternative insulation gases to SF₆ have been sought for a long time. Alternatives using the natural gases are considered to be suitable, but none of them show better properties for insulation as well as good environmental compatibility. Therefore, it is necessary to rationalize the equipment insulation level and reduce the test voltage of electric power apparatus to as low a level as possible. The actual lightning surge waveform (so‐called nonstandard lightning impulse waveform) occurring in the actual field is different from the standard lightning impulse waveform (1.2/50 μs). There are many cases in which the actual lightning surge waveform has a steep rise and large decay of overvoltage, and the insulation requirements are not as severe as those for the standard lightning impulse waveform. In this paper, we focused our research on N₂ gas as an SF₆ substitute and investigated the insulation characteristics of N₂ gas for a single‐frequency oscillatory waveform with various frequencies from 2.7 to 20.0 MHz and damping ratios. Based on the experimental results, it might be possible to reduce the test voltage of N₂ gas insulation by evaluating the crest value of the actual lightning surge waveform that has been converted into an equivalent standard lightning impulse waveform. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 167(2): 10–20, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20754     

Moving pick‐up‐type contactless power transfer systems and their efficiency using series and parallel resonant capacitors

The equivalent circuit, the efficiency, and the important characteristics of moving pick‐up type contactless power transfer systems are described. If the primary series capacitor and the secondary parallel capacitors are chosen correctly and the winding resistances are ignored, the equivalent circuit of the transformer with these capacitors becomes the same as an ideal transformer at the resonant frequency. This simple approximation helps to understand the phenomena occurring with load changes. Because the circuit analysis becomes simple, the approximate value of the power transfer efficiency can be derived. This paper describes the determination of the capacitor values, the derivation of the equivalent circuit and the efficiency, and test results. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 172(2): 47–54, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20970     

Classification of the Degradation of Soft Sensor Models and Discussion on Adaptive Models

Soft sensors are used widely to estimate a process variable which is difficult to measure online. One of the crucial difficulties of soft sensors is that predictive accuracy drops due to changes of state of chemical plants. It is called as the degradation of soft sensor models. In this study, we attempted to classify this degradation of models in terms of changes in an explanatory variable and an objective variable, and the rapidity of the changes. Moreover, we discussed characteristics of adaptive soft sensor models, based on the classification results. By analyzing simulated data sets and a real industrial data set, we could obtain knowledge and information on appropriate adaptive models for each type of the degradation. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2339–2347, 2013     

Moderately high speed impact of two identical spheres

This paper deals with impacts between two identical spheres in moderately high speed range. Impact of spheres is one of basic problems in mechanical dynamics. Severity of impact is generally characterized by the coefficient of restitution. However, influence of material property on the coefficient of restitution has not been clarified yet. The authors previously investigated direct central impacts of two identical spheres in low speed range and revealed that strain rate sensitivity of material properties could not be ignored even in the low speed impacts. Therefore, this paper investigates the direct central impact of two identical spheres in higher speed range. The impact experiments were performed in range of impact speed 10 m/s–20 m/s by using air-gun setup. It was confirmed that the expressions for the coefficient of restitution and the contact time derived from the low speed impact remained effective in the moderately high speed range. Then numerical simulations by using Finite Element Method (F.E.M) have been carried out, in which the material properties and the strain rate effect were taken into account. The coefficient of restitution, contact time, sphere’s compression and contact circle diameter obtained by experiments and F.E.M. were compared and they matched well. Contact pressure distributions at maximum contact force were investigated. The contact pressure at sphere center varied little with impact speed but the contact pressure increased with impact speed near contact edge. Theoretical expression for prediction of the coefficient of restitution proposed by C. Thornton was examined to the experimental results of this study. To provide an accurate prediction, it is necessary to estimate the contact pressure depending on material properties. Finally, the Meyer analysis was applied to the case of this study and it was found that the Meyer’s law holds in the moderately high speed impact between two identical spheres.     

下一个! 通向未来的上海

文章希望在包容历史与未来这一方面,上海能成为建立起建筑新秩序的都市。     

Quantum Effects on Hydrogen Isotopes Adsorption in Nanopores

We have investigated the applicability of simulations and theoretical techniques for exploring the selectivities of hydrogen isotopes. We have simulated the adsorption isotherms of H₂ in an idealized carbon slit pore at 77 K by using the grand canonical Monte Carlo simulations with the Feynman-Hibbs effective potential (FH-GCMC) and the rigorous path integral method (PI-GCMC), and we obtained good agreement between the isotherms from both simulations. This suggests that FH-GCMC, which uses the approximative Feynman-Hibbs treatment, is as useful as PI-GCMC for exploring H₂ adsorption at 77 K. Moreover, we show that the ideal adsorption solution theory (IAST) can predict the selectivity of D₂ over H₂ in the interstices of single-wall carbon nanotube (SWNT) bundles at 77 K (below 0.1 MPa) very well by comparing the obtained results with the mixture adsorption FH-GCMC simulations. This indicates that IAST is also applicable to the estimation of the selectivity of D₂ over H₂ at moderate pressures and at 77 K from experimental single-component adsorption isotherms. We also demonstrate that the FH-GCMC simulation can reproduce the experimental adsorption isotherms of H₂ and D₂ in aluminophosphate AlPO₄-5 at 77 K. Finally, we analyze the selectivity of D₂ over H₂ by IAST with the experimental single-component adsorption isotherms of H₂ and D₂ at 77 K for a variety of adsorbents: AlPO₄-5, activated carbon fibers (ACFs), HiPco SWNT, and SWNHs. The selectivities predicted by the experimental adsorption data based on the results from the FH-GCMC simulations are presented and discussed.     

High-reliability, high-performance RF micromachined switch using liquid metal

Existing mechanical relays have reliability-related issues including unstable contact resistance and limited cycle life. These problems are caused by mechanical fatigue and wearing of the contact surfaces. In the liquid metal micro switch (LiMMS), we employ a liquid-liquid contact to address these issues. The switching operation is achieved by forming a gap in the liquid metal using gas expansion. Our prototype has a microchannel on a glass substrate to hold a tiny amount of mercury, 0.15 mm in width and 0.1 mm in height, and TaN thin-film heaters on a ceramic substrate to expand the operating gas by heating. The substrates are bonded together and the total size of the device is 5/spl times/5/spl times/1.4 mm. We successfully demonstrated 70-m/spl Omega/ on-resistance, 1 ms-switching speed, the ability to handle up to 1 A of dc current and over 1/spl times/10/sup 8/ cycle operation. LiMMS also has good RF performance, better than 1 dB insertion loss, and better than 20 dB isolation up to 18 GHz.