Optical Burst Switching Router With 40-,10-Gb/s Bit-Rate Transparent Contention Resolution

We report a bit-rate transparent optical burst switching (OBS) router prototype using a fast 5 times 5 PLZT [(Pb,La)(Zr,Ti)O₃ ] optical matrix switch. Dynamic switching in a two-wavelength, 2 times 2 OBS switch is demonstrated. Contention resolution using a tunable Mach-Zehnder interferometer wavelength converter for both 40- and 10-Gb/s bursts is demonstrated for the first time. Error-free operation was achieved for both bit rates under the same settings, as required in autonomous networks     

SAW Filters Composed of Interdigital Schottky and Ohmic Contacts on AlGaN/GaN Heterostructures

We proposed surface acoustic wave (SAW) filters composed of interdigital Schottky and ohmic contacts on AlGaN/GaN heterostructures. The contribution of the SAWs appeared in the radio frequency characteristics of the filters when the Schottky contacts were reverse biased. Onsets of the SAW signals and the threshold voltage of simultaneously fabricated high-electron mobility transistors were found to almost agree with one another. We also obtained an isolation of >40 dB. These results suggest that SAW-based functional devices are likely to be realized using AlGaN/GaN heterostructures with interdigital Schottky and ohmic contacts     

Fabrication of silicon nitride nanoceramics—Powder preparation and sintering: A review

Fine-grained silicon nitride ceramics were investigated mainly for their high-strain-rate plasticity. The preparation and densification of fine silicon nitride powder were reviewed. Commercial sub-micrometer powder was used as raw powder in the “as-received” state and then used after being ground and undergoing classification operation. Chemical vapor deposition and plasma processes were used for fabricating nanopowder because a further reduction in grain size caused by grinding had limitations. More recently, nanopowder has also been obtained by high-energy milling. This process in principle is the same as conventional planetary milling. For densification, primarily hot pressing was performed, although a similar process known as spark plasma sintering (SPS) has also recently been used. One of the advantages of SPS is its high heating rate. The high heating rate is advantageous because it reduces sintering time, achieving densification without grain growth. We prepared silicon nitride nanopowder by high-energy milling and then obtained nanoceramics by densifying the nanopowder by SPS.     

A perturbation method for guiding center orbit following calculations in the presence of Coulomb collisions

An orbit following guiding center Monte Carlo calculation is presented which employs a general flux coordinate system in an axisymmetric plasma equilibrium. The calculation incorporates collision effects. Furthermore, a perturbation expansion is applied for the guiding center calculations in the presence of a frictional source.     

FreeWalk: a 3D virtual space for casual meetings

A meeting environment for casual communication in a networked community, FreeWalk provides a 3D common area where everyone can meet and talk freely. FreeWalk represents participants as 3D polygon pyramids, on which their live video is mapped. Voice volume remains proportional to the distance between sender and receiver. For evaluation, we compared communications in FreeWalk to a conventional desktop videoconferencing system and a face-to-face meeting     

Scrotal ulcer occurring in patients with acute promyelocytic leukemia during treatment with all-trans retinoic acid

STUDY OBJECTIVE: To evaluate the efficacy of conservative laparoscopic surgery in a series of patients with stage III-IV endometriosis. DESIGN: Prospective study (Canadian Task Force classification II-1). SETTING: University-affiliated hospital. PATIENTS: All 141 women who underwent conservative operative laparoscopy for stage III-IV endometriosis between January 1993 and December 1996 and were followed for a minimum of 6 months. INTERVENTIONS: Laparoscopic procedures performed with scissors, bipolar coagulation, and hydrodissection. MEASUREMENTS AND MAIN RESULTS: Clinical examination, transvaginal ultrasonography, and pain questionnaire were scheduled every 6 months postoperatively. The cumulative proportion of pregnant patients and cumulative recurrence rate were calculated by Kaplan-Meier method. Twenty-five women (44%) with infertility became pregnant. Twenty-three (51%) had stage III and two (16.7%, p <0.05) had stage IV endometriosis. The 24-month cumulative pregnancy rate was 57.5%. Thirty-one women (22%) reported pain recurrence during follow-up. Five (3.5%) recurrences were confirmed by histologic examination and eight (5.7%) were documented only by clinical and ultrasonographic findings. No recurrence occurred in the first 6 months of follow-up. CONCLUSION: Operative laparoscopy seems to be effective treatment for stage III endometriosis. A larger series with longer follow-up is necessary to clarify its role in the management of stage IV disease. (J Am Assoc Gynecol Laparosc 6(1):55-58, 1999)     

Novel Structures for Porous Silicon Light-Emitting Diodes

In this paper, two novel structures of porous silicon (PS) light-emitting diodes (LEDs) are proposed aiming at the reduction of series resistance, R_s. The basic idea of the novel structures is to suppress the excessive growth of nanoporous silicon (nano-PS) layer that is electroluminescence- (EL-) active but highly resistive. The initial wafer of the first structure consists of a lightly-doped layer stacked on a highly-doped substrate. As a consequence of anodization, nano-PS layer is formed only in the lightly-doped layer, while meso-PS layer with moderate resistivity is formed in the highly-doped substrate. The second structure consists of alternately stacked nano- and meso-PS layers, since it is expected that multiple thin nano-PS layers connected in series are less resistive than a single thick nano-PS layer. Preliminary experimental results proved the effectiveness of these novel structures on the reduction of R_s.     

Thermomechanical behavior of an Fe-Based shape memory alloy :Transformation conditions and hystereses

The transformation conditions of an Fe-based polycrystalline shape memory alloy are determined experimentally under the multiaxial stress state. The martensite start condition is represented as an oval conical surface in the axial stress-shear stress-temperature space, meaning the transformation condition is not the von Mises type condition in plasticity and clearly depends on the third invariant of the stress tensor. The austenite start and finish conditions are also determined as the planes in the multiaxial stress-temperature space. The uniaxial stress-strain-temperature hysteretic behavior determined under the uniaxial thermomechanical loads is simulated by introducing the internal state variables which represent the status of the microscopic internal structures.     

Measurement of wavelength variation of mode field radius using far-field pattern method

The far-field pattern measuring technique is used to measure the wavelength dependence of the mode field radius in standard single-mode fibres. Chromatic dispersion calculated from these results is shown to be accurate using as few as three lasers. Both theoretical and experimental results are presented.     

Facile one-step route to polyaniline–silver nanocomposite particles and their application as a colored particulate emulsifier

Polyaniline–silver nanocomposites were synthesized in the form of colloidal particles by the facile one-step aqueous chemical oxidative dispersion polymerization of aniline using silver nitrate as an oxidant and poly(vinyl alcohol) as a colloidal stabilizer. Aniline monomer was oxidized by silver ions, yielding polyaniline and elemental Ag simultaneously. The synthesized nanocomposite particles were colloidally stable over 2 years and transmission electron microscopy studies indicated the production of spherical, plate and rod-shaped polyaniline–silver nanocomposite particles with a silver core–polyaniline shell morphology. The conductivity of a pressed pellet of the nanocomposite particles using the conventional four-point probe technique was 1.4 × 10^?2 S/cm at 25 °C. The nanocomposite particles behaved as a ‘colored’ particulate emulsifier for the stabilization of transparent oil-in-water emulsions.