Quantitative analysis of agglomerates levitated from particle layers in a strong electric field

The electrification, agglomeration, and levitation of particles in a strong electric field were analyzed experimentally and theoretically. Particle layers of glass, alumina, and ferrite were formed on a plate electrode and an external voltage was applied. Microscopic observations of the agglomerates levitated from the particle layers revealed that the number of primary particles constituting an agglomerate is affected by particle diameter and electrical resistance, but not by the applied electric field. The electric field distributions in the system were calculated by considering the charges and geometries of the agglomerates formed on the particle layers. The charges of the agglomerates were obtained experimentally. All forces acting on the agglomerates (i.e., gravitational forces, Coulomb forces, interaction forces between polarized particles, image forces, and gradient forces) were analyzed under different conditions, including various electric field distributions and charges of agglomerates. Furthermore, the critical conditions for the levitation of the agglomerates were evaluated using a force balance.     

一种微小物体精密定位的直线微工作台

提出了一种基于平滑冲击驱动原理的精密定位直线微工作台.通过采用微小强磁铁作为摩擦元件,减小了由摩擦元件磨损而产生的摩擦力的变化,从而提高了微工作台的稳定性.设计制作了微工作台样机,并对精密定位工作台的动态特性和静态特性进行了实验研究.结果表明,微工作台体积小(20mm×10 mm×3 mm),可实现6 nm的精确定位,最高驱动速度可达5.4 mm/s,最大行程可达20 mm.     

Oxidation behavior of copper nanoparticles at low temperature

A mass gain for copper nanoparticles with a mean diameter of 20 nm in a 20% oxygen-nitrogen atmosphere was measured at 150-300 °C using thermogravimetry (TG). The mass gain equilibrium of the copper particles differed at each temperature, and a threshold temperature was recorded. Oxide products, consisting mainly of Cu₂O, formed on the copper nanoparticles below the threshold temperature. Above the threshold temperature, there was an initial, and drastic, formation of Cu₂O, which then changed to CuO. The activation energy for the oxidation of the copper nanoparticles that could be calculated from the rate of the mass gain was an indication of the nano-effect of the copper nanoparticles.     

Photo-induced properties of anodic oxide films on Ti6Al4V

Photocatalytic activity and wettability of the anodic oxide layer on Ti6Al4V prepared by anodization in a sulfuric acid electrolyte are explored. The oxide is composed mainly of TiO₂ with V₂O₅, VO₂ and Al₂O₃. The crystal structure of the TiO₂ varies from anatase to rutile with the sulfuric acid concentration in the electrolyte. Anatase exhibits better photocatalytic activity compared with rutile, which is different from those on Ti and Ti-Nb-Sn alloy. Contact angles of the oxides decrease with ultraviolet light illumination, and hydrophilicity is observed in the rutile oxide. Both photocatalytic activity and hydrophilicity are inferior to the corresponding Ti and Ti-Nb-Sn alloy, which is explained by the presence of Al₂O₃ in the anodic oxide.     

Fabrication of Ni compound nanocrystal/nanocarbon composites by cooling of chloride-based fluxes

Unique Ni compound nanocrystals were successfully grown on carbon nanotubes (CNTs) by cooling a mixed chloride flux. Cup-stacked CNTs (CSCNTs) were used as the nanocarbon materials because of their structural features. The grown nanocrystals had a nanosheet structure, which was densely assembled and had a ribbon-like morphology. Therefore, the nanocrystal/CSCNT composites were expected to have a highly active surface area for the catalyst composites. The selected area electron diffraction pattern and the related radial intensity profiles indicated that the grown nanocrystals were Ni(OH)2. When the pristine CSCNTs were used as a starting material, the formation efficiency of the nanocrystal/CSCNT composites decreased because the pristine CSCNTs were not dispersed in the KCl-LiCl flux. Therefore, functionalization of the CSCNTs was carried out with VUV light irradiation. The dispersibility of the VUV light-treated CSCNTs increased in the KCl-LiCl flux in comparison with the pristine CSCNTs because oxygen-containing functional groups, such as -COOH and -CO, were introduced onto the surfaces of the CSCNTs.     

Characterization of mixing performance in a microreactor and its application to the synthesis of porous coordination polymer particles

Here we quantitatively evaluated the mixing performance of a tailor-made microreactor with central-collision type through the iodide/iodate chemical test reaction, and applied the microreactor to the synthesis of zeolitic imidazolate framework-8 (ZIF-8), which is a subclass of porous coordination polymers (PCPs) or metal organic frameworks (MOFs). The chemical test reaction demonstrated excellent mixing performance of the microreactor with a characteristic mixing time shorter than 1 ms, which is approximately 100 times faster than those of a batch reactor and a millimeter-sized Y-shaped mixer. Taking advantage of the rapid and uniform mixing, the microreactor successfully produced ZIF-8 particles with high reproducibility by simply mixing aqueous solutions of zinc nitrate and 2-methylimidazole. The synthesis at room temperature resulted in ZIF-8 particles with chamfered cube shape, while a lower temperature of 5 °C produced raspberry-type spherical particles. We confirmed that prepared ZIF-8 particles have BET surface area of ～1500 m²/g and exhibit the gate adsorption behavior caused by the structural transition of the ZIF-8 framework.     

Fabrication of highly crystalline NbOx nanotube/cup-stacked CNT nanocomposites

Carbon nanotubes (CNTs) are promising catalyst supports for fuel cell applications. Metal oxide/CNT nanocomposites are also being studied for dye-sensitized solar-cell, photocatalyst, and sensor applications. The fabrication of nanocomposites consisting of highly crystalline NbOx nanotubes and cup-stacked carbon nanotubes (CSCNTs) is reported herein. The CSCNTs were selected for the carbon materials because of their distinctive structure. The CSCNTs were photochemically treated with vacuum ultraviolet light, which increased the amount of oxygen-containing functional groups therein. NbOx nanotubes with no defects were successfully prepared with the chemical treatment of highly crystalline, layered, flux-grown K4Nb6O17 crystals. First, K4Nb6O17 crystals were grown from a KCl flux at a holding temperature of 800 degrees C. Next, NbOx nanosheets were prepared from the layered K4Nb6O17 crystals via a two-step exfoliation process, which consists of proton exchange in an acid solution and intercalation of the tetrabutylammonium ions. The NbOx nanosheets were rolled up into nanotubes with diameters of about 20 nm and lengths of 100-500 nm on the surfaces of the CSCNTs; thus, unique and complex NbOx/CSCNT nanocomposites were successfully fabricated.     

Four-point probe resistance measurements using PtIr-coated carbon nanotube tips

We performed four-terminal conductivity measurements on a CoSi2 nanowire (NW) at room temperature by using PtIr-coated carbon nanotube (CNT) tips in a four-tip scanning tunneling microscope. The physical stability and high aspect ratio of the CNT tips made it possible to reduce the probe spacing down to ca. 30 nm. The probe-spacing dependence of resistance showed diffusive transport even at 30 nm and no current leakage to the Si substrate.     

2-甲基-8-（9，9-二丁基芴）-3，5，7-三炔-2-辛醇的合成和性质研究

合成了一种新颖的乙炔衍生物，2-甲基-8-（9，9-二丁基芴）-3，5，7-三炔-2-辛醇（6a），并利用红外光谱（IR），紫外光谱（Uv），核磁（NMR），质谱（MS）等对其结构进行了表征。利用红外光谱（IR）和紫外光谱（Uv）对其拓扑固相聚合性质进行了研究。实验结果表明，这些化合物在加热和紫外光照射条件下都能够发生固相聚合，但得到的是结构复杂的聚合物。     

金属蒸气法制备聚合物固载Pd－Cu双金属原子簇

为了不使用任何还原剂而获得聚合物固载高分散零价双金属加氢催化剂，利用金属蒸气法制备了３种不同Ｐｄ／Ｃｕ质量比的聚合物固载双金属原子簇。透射电镜（ＴＥＭ）和Ｘ衍射（ＸＲＤ）测定表明，Ｐｄ－Ｃｕ原子簇粒度很小，平均直径小于３．０ｎｍ。Ｘ射线光电子能谱（ＸＰＳ）表明，Ｐｄ和Ｃｕ均为零价态。Ｐｄ－Ｃｕ原子簇在异丙叉加氢反应中具有很高的活性和选择性。这些结果提供了令人信服的证据，即金属蒸气法可用于在聚合物孔穴内直接而温和地置入小的零价金属原子簇，而且这样制备的聚合物固载金属原子簇很适合于催化应用。