A new method to test system diagnosability

A new necessary and sufficient condition for t-diagnosability of a system is proposed. It is shown that the new scheme is computationally more efficient than the existing one for checking the diagnosability of a system.     

Finite element analysis of 3-ply laminated conical shell for flutter

The results of the finite element analysis of 3-ply laminated conical shells with light core for linear panel flutter are presented and certain advantages of such shells discussed.     

Virus Matryoshka: A Bacteriophage Particle—Guided Molecular Assembly Approach to a Monodisperse Model of the Immature Human Immunodeficiency Virus

Immature human immunodeficiency virus type 1 (HIV‐1) is approximately spherical, but is constructed from a hexagonal lattice of the Gag protein. As a hexagonal lattice is necessarily flat, the local symmetry cannot be maintained throughout the structure. This geometrical frustration presumably results in bending stress. In natural particles, the stress is relieved by incorporation of packing defects, but the magnitude of this stress and its significance for the particles is not known. In order to control this stress, we have now assembled the Gag protein on a quasi‐spherical template derived from bacteriophage P22. This template is monodisperse in size and electron‐transparent, enabling the use of cryo‐electron microscopy in structural studies. These templated assemblies are far less polydisperse than any previously described virus‐like particles (and, while constructed according to the same lattice as natural particles, contain almost no packing defects). This system gives us the ability to study the relationship between packing defects, curvature and elastic energy, and thermodynamic stability. As Gag is bound to the P22 template by single‐stranded DNA, treatment of the particles with DNase enabled us to determine the intrinsic radius of curvature of a Gag lattice, unconstrained by DNA or a template. We found that this intrinsic radius is far larger than that of a virion or P22‐templated particle. We conclude that Gag is under elastic strain in a particle; this has important implications for the kinetics of shell growth, the stability of the shell, and the type of defects it will assume as it grows.     

Effect of cobalt-60 γ radiation on the physical and chemical properties of poly(ethylene terephthalate) polymer

The structural, optical, and morphological properties of Co⁶⁰ γ irradiation on poly(ethylene terephthalate) polymer samples were studied with X-ray diffraction (XRD), ultraviolet–visible spectroscopy, scanning electron microscopy (SEM), and Raman spectroscopy. The diffraction pattern of virgin sample showed that the polymer was semicrystalline in nature. However, because of irradiation, the crystallinity decreased up to a dose level of 110 kGy and increased up to 300 kGy. The crystallite size, strain, and dislocation were calculated from the XRD data, and the crystallite size decreased from 291.07 to 346.90 Å. The absorption edge shifted from 315 to 330 nm, and the band gap of the samples decreased from 3.79 to 3.66 eV. The SEM micrographs showed radial bulging along with inhomogeneous liner exfoliation, and also, a rocky shape pattern with different sizes was observed. A significant change was found in the Raman spectra of the γ-irradiated polymer at the highest dose. The results of the structural, optical, and morphological studies show recovery characteristics at the highest dose level of 300 kGy. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

A weightage formula to rerank periodicals in the field of microbiology

Ranking lists of periodicals in different scientific disciplines are generally based on the total number of citations derived from a group of source journals with equal weightage given to all citations irrespective of chronology. As a result, in all these ranking lists, the position occupied by the post-war journals, may not be an accurate index of their demand or usefulness to research workers in the concerned field. This may happen because the quantum of published literature in the new journals is limited by the period for which they have been in existence, which is in many cases less than 20 years. Moreover, many of the post-war journals appearing in all these recent ranking lists have started publication even after 1960s, and their enumerated citations cover in fact a variable period of less than 20 years unlike in the case of pre-war journals. To avoid such discriminating against new journals which necessarily have fewer citation credits Sengupta suggested earlier an off-setting weightage formula which has been applied in this paper to rerank microbiology periodicals. A revised ranking list in the field of microbiology has been recommended in preference to the earlier one compiled by Sengupta. Results and findings, after application of the weightage formula, have been presented and discussed in this paper.     

On thermal and vibrational properties of LaGaO3 single crystals

The thermal expansion and vibrational properties of [1 0 0] and [0 0 1] LaGaO₃ single crystals have been studied by thermal mechanical analysis and micro-Raman spectroscopy. A first-order orthorhombic to rhombohedral phase transition has been confirmed by both techniques, as well as by in situ heating using optical microscopy. The appearance of a metastable intermediate phase, tentatively assigned as monoclinic, has been detected both by optical microscopy and Raman spectroscopy upon heating of the [1 0 0] and [0 0 1] LaGaO₃ single crystals. Not only temperature, but the stress-induced orthorhombic to rhombohedral phase transition has also been detected by Raman mapping of the residual impression made by Vickers indentation. The position map of bands belonging to the lower-temperature/pressure orthorhombic and the higher-temperature/pressure rhombohedral phase show that the rhombohedral phase is located inside the impression, where the applied indentation stresses are the highest, whereas no rhombohedral phase is detected outside the impression, where the surface has not been altered by contact stresses.     

A comparative study of the microstructures observed in statically cast and continuously cast Bi-In-Sn ternary eutectic alloy

A ternary eutectic alloy with a composition of 57.2 pct Bi, 24.8 pct In, and 18 pct Sn was continuously cast into wire of 2 mm diameter with casting speeds of 14 and 79 mm min⁻¹ using the Ohno Continuous Casting (OCC) process. The microstructures obtained were compared with those of statically cast specimens. Extensive segregation of massive Bi blocks, Bi complex structures, and tinrich dendrites was found in specimens that were statically cast. Decomposition of γSn by a eutectoid reaction was confirmed based on microstructural evidence. Ternary eutectic alloy with a cooling rate of approximately 1 °C min⁻¹ formed a double binary eutectic. The double binary eutectic consisted of regions of BiIn and decomposed γSn in the form of a dendrite cell structure and regions of Bi and decomposed γSn in the form of a complex-regular cell. The Bi complex-regular cells, which are a ternary eutectic constituent, existed either along the boundaries of the BiIn-decomposed γSn dendrite cells or at the front of elongated dendrite cell structures. In the continuously cast wires, primary Sn dendrites coupled with a small Bi phase were uniformly distributed within the Bi-In alloy matrix. Neither massive Bi phase, Bi complex-regular cells, nor BiIn eutectic dendrite cells were observed, resulting in a more uniform microstructure in contrast to the heavily segregated structures of the statically cast specimens.     

A novel method for synthesis of α-Si3N4 nanowires by sol–gel route

Silicon nitride (Si₃ N₄) nanowires have been prepared by carbothermal reduction followed by the nitridation (CTRN) of silica gel containing ultrafine excess carbon obtained by the decomposition of dextrose over the temperature range of 1200–1350 °C. This innovative process involves repeated evacuation followed by purging of nitrogen gas so that the interconnected nanopores of the gel are filled with nitrogen gas prior to heat treatment. During heat treatment at higher temperatures, the presence of nitrogen gas in the nanopores of the gel starts the CTRN reaction simultaneously throughout the bulk of the gel, leading to the formation of Si₃ N₄ nanowires. The in situ generated ultrafine carbon obtained by the decomposition of dextrose decreases the partial pressure of oxygen in the system to stabilize the nanowires. The nanowires synthesized by this process are of ∼500 nm diameter and ∼0.2 mm length. The product was characterized by scanning electron microscope (SEM), energy dispersive x-ray analysis (EDX), x-ray diffraction (XRD) and infrared (IR) spectra.