Simulation studies on model reference adaptive controller based speed estimation technique for the vector controlled permanent magnet synchronous motor drive

This paper presents a speed estimation technique for the permanent magnet synchronous motor drive. A Model Reference Adaptive System (MRAS) has been formed using the instantaneous and steady-state reactive powers to estimate the speed. It has been shown that such unique MRAS offers several desirable features. The proposed technique is completely independent of stator resistance and is less parameter sensitive, as the estimation-algorithm is only dependent on q-axis stator inductance. Also, the method requires less computational effort as the simplified expressions are used in the MRAS. The stability of the proposed system is achieved through Popov’s Hyperstability criteria. Extensive simulation results are presented to validate the proposed technique. The system is tested at different speeds including zero speed and a very satisfactory performance has been achieved.     

An appreciation of J.C. Bose's pioneering work in millimeter waves

The pioneering work in the area of millimeter waves, performed by J. C. Bose, a physicist from Calcutta, India, during 1894-1900, is reviewed and appraised. Various measurement techniques and circuit components, developed by him a hundred years ago, are still being used. The development of the electromagnetic horn, the point-contact detector, and the galena (semiconductor) detector of electromagnetic waves are attributed to the original research of J.C. Bose     

A higher-order triangular plate bending element revisited

A new formulation of an eighteen-degrees-of-freedom higher-order triangular plate bending element using triangular area co-ordinates is presented. The displacement function w is taken as the complete fifth-order polynomial in area co-ordinates. The normal slope along an edge of the triangle is constrained to vary cubically. The twenty-one constants are expressed explicity in terms of eighteen degrees of freedom. The element stiffness matrix is expressed as a product of component matrices for which explicit expressions are developed and presented. No numerical inversion or integration is necessary. The formulation is expected to be useful specially for microcomputers.     

Exergy analysis of a coal‐based 210 MW thermal power plant

In the present work, exergy analysis of a coal‐based thermal power plant is done using the design data from a 210 MW thermal power plant under operation in India. The entire plant cycle is split up into three zones for the analysis: (1) only the turbo‐generator with its inlets and outlets, (2) turbo‐generator, condenser, feed pumps and the regenerative heaters, (3) the entire cycle with boiler, turbo‐generator, condenser, feed pumps, regenerative heaters and the plant auxiliaries. It helps to find out the contributions of different parts of the plant towards exergy destruction. The exergy efficiency is calculated using the operating data from the plant at different conditions, viz. at different loads, different condenser pressures, with and without regenerative heaters and with different settings of the turbine governing. The load variation is studied with the data at 100, 75, 60 and 40% of full load. Effects of two different condenser pressures, i.e. 76 and 89 mmHg (abs.), are studied. Effect of regeneration on exergy efficiency is studied by successively removing the high pressure regenerative heaters out of operation. The turbine governing system has been kept at constant pressure and sliding pressure modes to study their effects. It is observed that the major source of irreversibility in the power cycle is the boiler, which contributes to an exergy destruction of the order of 60%. Part load operation increases the irreversibilities in the cycle and the effect is more pronounced with the reduction of the load. Increase in the condenser back pressure decreases the exergy efficiency. Successive withdrawal of the high pressure heaters show a gradual increment in the exergy efficiency for the control volume excluding the boiler, while a decrease in exergy efficiency when the whole plant including the boiler is considered. Keeping the main steam pressure before the turbine control valves in sliding mode improves the exergy efficiencies in case of part load operation. Copyright © 2006 John Wiley & Sons, Ltd.     

Randomized Trial of Cognitive-Behavioral Therapy for Chronic Posttraumatic Stress Disorder in Adult Female Survivors of Childhood Sexual Abuse.

The authors conducted a randomized clinical trial of individual psychotherapy for women with posttraumatic stress disorder (PTSD) related to childhood sexual abuse (n = 74), comparing cognitive-behavioral therapy (CBT) with a problem-solving therapy (present-centered therapy; PCT) and to a wait-list (WL). The authors hypothesized that CBT would be more effective than PCT and WL in decreasing PTSD and related symptoms. CBT participants were significantly more likely than PCT participants to no longer meet criteria for a PTSD diagnosis at follow-up assessments. CBT and PCT were superior to WL in decreasing PTSD symptoms and secondary measures. CBT had a significantly greater dropout rate than PCT and WL. Both CBT and PCT were associated with sustained symptom reduction in this sample. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Comparative examination of adhesive and cohesive properties of fluorinated coatings on stone/tile surfaces

A NanoScratch methodology was used to evaluate the relative adhesive and cohesive strength of fluorinated poly(methyl methacrylate-co-methacrylic acid) and fluorinated phosphate coatings on stone and tile surfaces. In general, all coatings showed ability to bind to the stone and tile surfaces, and polymer-based coatings expressed stronger adhesion compared to a small-molecule fluorinated phosphate coating. Also, anionic fluorinated polymers containing methacrylic acid (MAA) residues in the ammonium carboxylate form adhered more strongly compared to corresponding acidic polymer counterparts. In addition, anionic fluorinated polymers, shown to adhere more strongly to granite than marble, possibly due to strong Lewis acid-base interaction between carboxylate and aluminosilicates. Conversely, the fluorinated polymers, bearing the MAA side-chains in their free-acid form, bound more strongly to marble via possible Brønsted acid-base interactions between carboxylic acid and calcium carbonate. Lastly, in most cases, comparable fracture thresholds were observed for the same coating material on different substrates. This was expected since fracture threshold is a measure of the mechanical strength of the coating material, independent of the substrate difference.     

DNA sensing by amplifying the number of near-infrared emitting, oligonucleotide-encapsulated silver clusters

A bifunctional oligonucleotide integrates in situ synthesis of a fluorogenic silver cluster with recognition of a target DNA sequence. With the template C(3)AC(3)AC(3)GC(3)A, a complex forms with 10 silver atoms that possesses electronic transitions in the near-infrared and that is detected at nanomolar concentrations using diode laser excitation. Pendant to this cluster encoding region, the recognition component binds a target DNA strand through hybridization, and decoupling of these two regions of the composite sensor renders a modular sensor for specific oligonucleotides. A target is detected using a quencher strand that bridges the cluster template and recognition components and disturbs cluster binding, as indicated by static quenching. Competitive displacement of the quencher by the target strand restores the favored cluster environment, and our key finding is that this exchange enhances emission through a proportional increase in the number of emissive clusters. DNA detection is also accomplished in serum-containing buffers by taking advantage of the high brightness of this fluorophore and the inherently low endogenous background in the near-infrared spectral region. Cluster stability in this biological environment is enhanced by supplementing the solutions with Ag(+).     

Chemical-induced pH-mediated molecular switch

The transmembrane protein α-hemolysin pore has been used to develop ultrasensitive biosensors, study biomolecular folding and unfolding, investigate covalent and noncovalent bonding interactions, and probe enzyme kinetics. Here, we report that, by addition of ionic liquid tetrakis(hydroxymethyl)phosphonium chloride solution to the α-hemolysin pore, the α-hemolysin channel can be controlled open or closed by adjusting the pH of the solution. This approach can be employed to develop a novel molecular switch to regulate molecular transport and should find potential applications as a "smart" drug delivery method.     

Pharmacophore Synergism in Diverse Scaffold Clinches in Aurora Kinase B

Aurora kinase B (AKB) is a crucial signaling kinase with an important role in cell division. Therefore, inhibition of AKB is an attractive approach to the treatment of cancer. In the present work, extensive quantitative structure–activity relationships (QSAR) analysis has been performed using a set of 561 structurally diverse aurora kinase B inhibitors. The Organization for Economic Cooperation and Development (OECD) guidelines were used to develop a QSAR model that has high statistical performance (R²_tr = 0.815, Q²_LMO = 0.808, R²_ex = 0.814, CCC_ex = 0.899). The seven-variable-based newly developed QSAR model has an excellent balance of external predictive ability (Predictive QSAR) and mechanistic interpretation (Mechanistic QSAR). The QSAR analysis successfully identifies not only the visible pharmacophoric features but also the hidden features. The analysis indicates that the lipophilic and polar groups—especially the H-bond capable groups—must be present at a specific distance from each other. Moreover, the ring nitrogen and ring carbon atoms play important roles in determining the inhibitory activity for AKB. The analysis effectively captures reported as well as unreported pharmacophoric features. The results of the present analysis are also supported by the reported crystal structures of inhibitors bound to AKB.     

Polyol surfactants derived from moringa seed oil for potential use in the pharmaceutical industry

Two polyol surfactants ((a) a crude product of 60% monoglyceride content and (b) a homogeneous sorbitan ester) have been prepared by alcoholysis from the not well known edible Moringa concanensis seed oil. These products constituted mainly oleic acid, which will be suitable for utilisation in the pharmaceutical industry. The optimum conditions of glycerolysis of the moringa seed oil have also been found.