读书：中国的手机文化

手机，是目前大多数中国人不可或缺的通讯工具。那么，Simon跟大家讲讲手机礼仪。很多人可能不明白，用手机也有礼仪吗？是的，特别是在跟美国人打交道的时候，尤其要注意这点，因为手机在美国的待遇和在中国的待遇是有很大的差别的。     

Concept and demonstration of an intermediate band tandem device for solar energy conversion

We have realized a tandem solar cell design that combines a pin‐junction with a photovoltaic intersubband absorber. This concept allows harvesting light in the visible range and the near‐ and mid‐infrared at the same time, and theoretically, energy conversion efficiencies beyond the Shockley–Queisser‐limit could be achieved. A test structure was grown, and the operation of this concept could be confirmed, in principal with an optical two‐beam experiment. The basic characteristics of the device can be explained with an equivalent circuit design that consists of three individual cells, and we find an obvious analogy to the concept of the intermediate band solar cell with noteworthy advantages at some points. Our results show, that for a working device it is crucial to adjust the properties of the photovoltaic intersubband absorber for optimal charge separating performance at the working point of the solar cell. Copyright © 2015 John Wiley & Sons, Ltd.     

How to test graphical user interfaces

An approach for automatically testing GUIs in the MATLAB environment has been proposed. We developed a software tool that tests GUIs by simulating the user through an action recorder. We proposed a heuristic test procedure: providing random input to GUI, but guiding the randomness with predefined weights assigned to the user controls. The weights change during the testing process, as the controls are activated. The errors are collected for later investigation.     

Performance of large-size superconducting coil in 0.21T MRI system

A high-temperature superconductor (HTS) was used on magnetic resonance imaging (MRI) receiver coils to improve image quality because of its intrinsic low electrical resistivity. Typical HTS coils are surface coils made of HTS thin-film wafers. Their applications are severely limited by the field of view (FOV) of the surface coil configuration, and the improvement in image quality by HTS coil is also reduced as the ratio of sample noise to coil noise increases. Therefore, previous HTS coils are usually used to image small in vitro samples, small animals, or peripheral human anatomies. We used large-size HTS coils (2.5-, 3.5-, and 5.5-in mean diameter) to enhance the FOV and we evaluated their performance through phantom and human MR images. Comparisons were made among HTS surface coils, copper surface coils, and cool copper surface coils in terms of the signal-to-noise ratio (SNR) and sensitivity profile of the images. A theoretical model prediction was also used to compare against the experimental result. We then selected several human body parts, including the wrist, feet, and head, to illustrate the advantage of HTS coil over copper coil when used in human imaging. The results show an SNR gain of 200% for 5.5-in HTS coil versus same size copper coils, while for 2.5- and 3.5-in coils it is 250%. We also address the various factors that affect the performance of large size HTS coils, including the coil-to-sample spacing due to cryogenic probe and the coil-loading effect.     

用无线传感器组成无线传感器网络

物联网的愿景之一是能够测量以前从未测量过的变量。无论应用是监视基础设施老化(例如桥梁、隧道或电力传输线的老化),还是实时提供停车及交通信息,都需要无线传感器网络(WSN)提供与有线网络类似的性能,而且适合实际部署。传感器网络要能够扩展至包含大量无线节点,而且在很多情况下,需要跨越很长的距离。     

Impact of the gain saturation dynamics in semiconductor optical amplifiers on the characteristics of an analog optical link

We evaluate both theoretically and experimentally the gain saturation dynamics of semiconductor optical amplifiers when inserted into an analog optical link. Its impact in terms of radio frequency response, nonlinearity, and noise is investigated. In particular, the frequency response is shown to be a peculiar high-pass filter exhibiting two characteristic frequencies.     

Superconducting microwave filter systems for cellular telephone base stations

In the second decade following the discovery of high-temperature superconductivity (HTS), wireless communications has emerged as the earliest large commercial market. The enormous growth of the wireless industry coupled with its increasing technology demands has created a significant opportunity for HTS technology in wireless base stations. These systems combine high-performance HTS RF filters with cryocooled semiconductor preamplifiers to offer enhanced sensitivity to improve signal reception and exceptional selectivity to reject interfering signals. There are now thousands of installed HTS systems and the prospects are good for widespread future deployment. This paper discusses the underlying technologies that support HTS wireless applications, based upon the characteristic microwave properties of HTS thin films and substrates. HTS filter design technology has been under development for a decade and has gained a fair measure of maturity in terms of design tools, simulation techniques, and available topologies. The need for extremely narrow-band filters, highly selective filters, frequency-agile filters, and very compact filter designs has led to many technology advances. On the system level, comparable advances in cryocooler technology and cryopackaging have enabled the development of a broadly deployable technology. We discuss industry trends and the methodologies and results of simulations and real-world measurements of HTS filter systems.     

INFLUENCE OF TEMPERATURE AND SOLVENT ON THE PRECIPITATION OF ASPHALTENES

Asphaltenes has been precipitated from a Kuwait flash residue using different n-alkanes (n-C5 to n-C8) at various temperatures ranging from 4^°C to reflux temperatures of the used precipitants. Structures in the asphaltene fractions has been revealed using U.V. fluorescence spectroscopy, elemental analysis and to some extent 1H-nmr. These analysis shows that asphaltenes precipitated in the same amount but at different temperature and with different solvents have merely the same composition. For all n-alkanes the curves of precipitated amount versus temperature show maxima at about 25^°C, implying a shift in the solubility of the asphaltenes.The impact of alkane chain length on the aggregation of asphaltenes through hydrogen bonds is discussed using the alkane-alcohol system as a model. The asphaltene solubility is discussed with the help of the Scatchard-Hildebrand equation.     

Silver versus white sheet as a back reflector for microcrystalline silicon solar cells deposited on LPCVD‐ZnO electrodes of various textures

We compare the performance of two back reflector designs on the optoelectrical properties of microcrystalline silicon solar cells. The first one consists of a 5‐µm‐thick low‐pressure chemical vapor deposition (LPCVD)‐ZnO electrode combined with a white sheet; the second one incorporates an Ag reflector deposited on a thin LPCVD‐ZnO layer (with thickness below 200 nm). For this latter design, the optical loss in the nano‐rough Ag reflector can be strongly reduced by smoothing the surface of the thin underlying ZnO layer, by means of an Ar‐plasma treatment. Because of its superior lateral conductivity, the thin‐ZnO/Ag back reflector design provides a higher fill factor than the dielectric back reflector design. When decreasing the roughness of the front electrode with respect to our standard front LPCVD‐ZnO layer, the electrical cell performance is improved; in addition, the implementation of the thin‐ZnO/Ag back reflector leads to a significant relative gain in light trapping. Applying this newly optimized combination of front and back electrodes, the conversion efficiency is improved from 8.9% up to 9.4%, for cells with an active‐layer thickness of only 1.1 µm. We thereby highlight the necessity to optimize simultaneously the front and back electrodes. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of Mn and Nb Doped BaTiO3 in the Dielectric Properties in the Ba(Mn1/2Nb1/2)xTi1−xO3

Polycrystalline samples of BaTi_1?x (Mn_0.5Nb_0.5) _x O₃ with x = 0.025, 0.05, 0.075, 0.1, 0.125, 0.15, and 0.175 have been synthesized by the high-temperature solid-state reaction technique. The effects of cationic substitution of manganese and niobium for titanium at B sites of the BaTiO₃ perovskite lattice on symmetry and dielectric properties were investigated. X-ray diffraction at room temperature and dielectric permittivity in the temperature range from 85 K to 500 K and frequency range from 100 Hz to 2 × 10⁵ Hz were studied. The evolution from a normal ferroelectric to a relaxor ferroelectric is emphasized. T _C or T _m decreases when both manganese and niobium are introduced into the lattice of BaTiO₃. High dielectric constant of around 9000 at T _C = 280 K was found for Ba Ti_0.925(Mn_0.5Nb_0.5)_0.075O₃ ceramic. A relaxor ferroelectric with ΔT _m = 60 K and $ \varepsilon_{\rm{r}}^{\prime } $ of about 3500 at 10 kHz with T _m = 150 K was found for the BaTi_0.85(Mn_0.5Nb_0.5)_0.15O₃ sample.