Catalytic activity of dispersed CuO phases towards nitrogen oxides (N2O, NO, and NO2)

A systematic reactivity study of N₂O, NO, and NO₂ on highly dispersed CuO phases over modified silica supports (SiO₂–Al₂O₃, SiO₂–TiO₂, and SiO₂–ZrO₂) has been performed. Different reaction paths for the nitrogen oxide species abatement were studied: from direct decomposition (N₂O) to selective reductions by hydrocarbons (N₂O, NO, and NO₂) and oxidation (NO to NO₂). The oxygen concentration, temperature, and contact time, were varied within suitable ranges in order to investigate the activity and in particular the selectivity in the different reactions studied. The support deeply influenced the catalytic properties of the active copper phase. The most acidic supports, SiO₂–Al₂O₃ and SiO₂–ZrO₂, led to a better activity and selectivity of CuO for the reactions of N₂O, NO, and NO₂ reductions and N₂O decomposition than SiO₂–TiO₂. The catalytic results are discussed in terms of actual turnover frequencies starting from the knowledge of the copper dispersion values.     

The phase behavior,mechanical, and rheological characteristics of blends containing nitrile polymers and poly(ethylene-co-maleic anhydride)

The phase behavior of binary blends of acrylonitrile/methyl acrylate/butadiene terpolymer (B210) and poly(ethylene-co-maleic anhydride) (PEMA) was examined based on thermal analysis and optical microscopy. Miscibility of these polymer blends was recognized over a wide range of compositions. The appearance of phase separation during subsequent heatings above the glass transition temperature (T_g) of these blends was associated with a lower critical solution temperature (LCST) behavior. Rheological characteristics such as shear storage modulus (G′), loss modulus (G″) and complex viscosity have been shown to depend on the amount of PEMA in the blend. Mechanical properties including the tensile strength and flexural modulus also were found to be related to the composition of the blend. © 1993 John Wiley & Sons, Inc.     

Motif patterns in 2D

Motif patterns consisting of sequences of intermixed solid and don’t-care characters have been introduced and studied in connection with pattern discovery problems of computational biology and other domains. In order to alleviate the exponential growth of such motifs, notions of maximal saturation and irredundancy have been formulated, whereby more or less compact subsets of the set of all motifs can be extracted, that are capable of expressing all others by suitable combinations. In this paper, we introduce the notion of maximal irredundant motifs in a two-dimensional array and develop initial properties and a combinatorial argument that poses a linear bound on the total number of such motifs. The remainder of the paper presents approaches to the discovery of irredundant motifs both by offline and incremental algorithms.     

Spray-Coating of Superhydrophobic Coatings for Advanced Applications

Superhydrophobic coatings are widely applicable, e.g., as self-cleaning surfaces or water–oil separation membranes, yet their wider usage is impeded due to costs of fabrication, size, or substrate limitation. Spray-coating is a versatile coating procedures and might offer a good solution for the fabrication of these superhydrophobic coatings, due to the fact that coatings can be fabricated on various materials in a simple, fast, and inexpensive manner. Most procedures rely on hybrid coatings of hydrophobized nanoparticles and a polymeric matrix, which have several drawbacks including the easy loss of nanoparticles and difficult waste handling. Here, the fabrication of the superhydrophobic material, called Fluoropor, for the first time, by spray-coating on various substrates including metals, tissues, concrete, and glass is presented. It is fabricated by spray-coating a mixture of a highly fluorinated monomer blended with porogens followed by photopolymerization. The superhydrophobicity of the material relies on the porous structure on the micro-/nanoscale across the bulk material and does not require any nanoparticles. Excellent self-cleaning ability of these coatings, resistance against thermal and abrasive impact, and their application as oil–water separation membranes are shown. This versatile applicability is highly promising for real-world application as self-cleaning coatings or oil–water separating membranes.     

Estimation of spatial-temporal gait parameters in level walking based on a single accelerometer: Validation on normal subjects by standard gait analysis

This paper investigates the ability of a single wireless inertial sensing device stuck on the lower trunk to provide spatial-temporal parameters during level walking. The 3-axial acceleration signals were filtered and the timing of the main gait events identified. Twenty-two healthy subjects were analyzed with this system for validation, and the estimated parameters were compared with those obtained with state-of-the-art gait analysis, i.e. stereophotogrammetry and dynamometry. For each side, from four to six gait cycles were measured with the device, of which two were validated by gait analysis. The new acquisition system is easy to use and does not interfere with regular walking. No statistically significant differences were found between the acceleration-based measurements and the corresponding ones from gait analysis for most of the spatial-temporal parameters, i.e. stride length, stride duration, cadence and speed, etc.; significant differences were found for the gait cycle phases, i.e. single and double support duration, etc. The system therefore shows promise also for a future routine clinical use.     

Redox-flexible NADH oxidase biosensor: A platform for various dehydrogenase bioassays and biosensors

A generic amperometric bioassay based on the enzymatic oxidation catalysed by the stable NADH oxidase (NAox) from Thermus thermophilus has been developed for NADH measurements. The NAox uses O₂ as its natural electron acceptor and produces H₂O₂ in a two-electron process. Electrochemical and spectrophotometric experiments showed that the NAox used in this work, presents a very good activity towards its substrate and, in contrary to previously mentioned NADH oxidases, does not require the addition of any exogenous flavin cofactor neither to promote nor to maintain its activity. In addition, the NAox used also works with artificial electron acceptors like ferrocene derivatives. O₂ was successfully replaced by redox mediators such as hydroxymethyl ferrocene (FcCH₂OH) for the regeneration of the active enzyme. Combining the NAox with the mediator and the horseradish peroxidase we developed an original, high sensitive “redox-flexible” NADH amperometric bioassay working in a large window of applied potentials in both oxidation and reduction modes. The biosensor has a continuous and complementary linearity range permitting to measure NADH concentrations starting from 5 × 10⁻⁶ M in reduction until 2 × 10³ M in oxidation. This redox-flexibility allows choosing the applied potential in order to avoid electrochemical interferences. The association of the “redox-flexible” concept with NADH dependent enzymes opens a novel strategy for dehydrogenases based bioassays and biosensors. The great number of dehydrogenases available makes the concept applicable for numerous substrates to analyse. Moreover it allows the development of a wide range of biosensors on the basis of a generic platform. This gives several advantages over the previous manufacturing techniques and offers a general and flexible scheme for the fabrication of biosensors presenting high sensitivities, wide calibration ranges and less affected by electrochemical interferences.     

Innovation at the end of the life cycle: discontinuous innovation strategies by incumbents

This paper focuses on the strategies of incumbents that seek to develop discontinuous innovations within the boundaries of a mature innovation system. Mature innovation systems do not provide support for these discontinuous innovations. This article focuses on exploring why incumbents in these setting engage in discontinuous innovation and what strategies they deploy to become successful. We analyse 10 cases of incumbents developing discontinuous innovations in the mature Dutch greenhouse horticulture sector. The results of our analysis show that the incumbents are primarily triggered by dissatisfaction with the current way of doing business and that the existing institutions are the main barrier to discontinuous innovation. In response, the incumbents try to circumvent the existing innovation system in their innovation process, but when successful also engage in changing the existing innovation system. This paper contributes to the understanding of the role of incumbents as source of discontinuous innovation in mature innovation systems.     

Linear optimal control strategies for production systems with a discrete-event demand pattern

A class of production systems are considered in this paper with the aim of determining closed-loop strategies providing the production effort as functions of the system state. The key feature of the considered class of systems is that the demand and the way it is satisfied are asynchronous sequences of part requests and instantaneous withdrawals, respectively, generated by discrete-event processes, whereas the production process has continuous-time dynamics. The optimization problem, whose objective is to minimize inventory and lateness costs, is restated as an optimal control problem by exploiting some structural properties of the optimal solution. Then, optimal closed-loop strategies are found with dynamic programming techniques.