Decolourisation of leather dye by ozonation

Sewage and industrial effluent treatment plants are installed with primary and secondary biological treatment units to reduce the discharge of pollution load into the environment. These treatment plants normally reduce the organic load in terms of BOD but not the pollution load in terms of inorganic salts (total dissolved solids—TDS) and colour in the effluent. To eliminate the contamination of ground and surface water bodies and to conserve water sources, the regulatory authorities have taken very stringent regulations to implement zero liquid discharge (ZLD) for industrial effluents, i.e., water recovery from wastewater and reuse. It is difficult to recover water from secondary treated wastewater directly, as it does not meet the reverse osmosis feed requirements. In order to achieve the feed requirements, different tertiary treatment methods are being tried. In this study, removal of colour due to residual dyes has been attempted using ozone. The main purpose of this study is to decolourise the dye used in leather processing. Also, the effect of pH and dye concentration on dye decolourisation has been investigated. From the study it has been observed that maximum decolourisation efficiency up to 97% could be achieved for the pH values (4,7, 9 and 11) and dye concentrations (30, 65, 180 and 360 mg/L) studied.     

Dispersion deposition of metal — Particle composites and the evaluation of dispersion deposited nickel — Lanthanum nickelate electrocatalyst for hydrogen evolution

A method for the preparation of high surface area coatings and its application towards fabrication of prospective composite electrocatalysts for hydrogen evolution is proposed. Exploratory studies with such a composite, (Ni/LaNiO₃), as a hydrogen electrode in alkaline solutions indicate that it is a more active electrocatalyst than sintered or electrodeposited nickel. The electrocatalytic properties were found to be a strong function of the deposition parameters as well as of the history of the oxide powder.     

Factors determining informal tanker water markets in Chennai,India

Many developing world cities have seen the emergence of informal markets where private tanker truck operators transport water extracted from peri-urban wells to urban consumers. This study adopted a systems-modelling approach to analyzing the informal tanker market in India. The results indicate that the demand for tanker supply was caused by lack of groundwater availability in private wells as well as unreliable piped supply. The study shows that two groundwater factors are relevant: depth to water and aquifer productivity. Together, these could explain the difference in spatial, temporal and consumer-specific variations in tanker dependence.     

Melt rheology and morphology of PP/SEBS/PC ternary blend

Melt rheological properties of the ternary blend of isotactic polypropylene (PP), styreneethylene–butylene–styrene terpolymer (SEBS), and polycarbonate (PC), PP/SEBS/PC, are studied in a wide range of composition, such that PP is the matrix and SEBS and PC are the minor components, with the proportion of one varying from 0 to 30% at various fixed compositions of the other. The respective binary blends, PP/SEBS and PP/PC, studied as the reference systems for interpretation of results on the ternary blends yielded interesting new information about the morphology development and its correlation with melt rheological properties of these binary blends. The studies include the measurement of melt rheological properties on a capillary rheometer in the shear rate range 10¹–10⁴ s^?1 at a fixed temperature of 240°C. The data presented as conventional flow curves are analyzed for the effect of blend composition and shear rate on pseudoplasticity, melt viscosity, and melt elasticity, and role of each individual component is identified. Morphology of dispersed phases of these blends is studied through scanning electron microscopy of the cryogenically fractured and suitably etched surfaces. Variations of morphology with blend composition and shear rate showed interesting correlation with melt rheological properties, which are discussed in detail. An important finding of the morphological studies is that in the PP/SEBS/PC ternary blend the SEBS phase forms two types of morphologies depending on the blend composition and shear rate: (i) simple droplets and (ii) boundary layer at the surface of the PC droplets. © 1993 John Wiley & Sons, Inc.     

Hydrogen permeation during zinc-manganese alloy plating

Electrodeposition of metals from solution is usually accompanied by the simultaneous discharge of hydrogen ions or water molecules. When hydrogen is liberated at an iron/steel surface during electrodeposition, a portion of the hydrogen is absorbed by the metal surface and then diffuses into the interior. The diffused hydrogen produces some detrimental effects, such as reduction in ductility and loss in mechanical strength, leading to hydrogen embrittlement. The present paper reports investigations on hydrogen permeation measurements in zinc-manganese alloy deposition using a modified electrode clamp for easy removal and fixing of the electrode. Hydrogen permeation studies indicate that the porosity of the deposit increases in the following order:Zn-Mn(14.3%), Zn-Mn(2.4%), Zn-Mn(24.8%) and Zn-Mn(37.5%).This is in agreement with the corrosion data obtained which indicates that Zn-Mn alloy deposits with low manganese content show better performance than pure zinc deposits.     

An evaluation of the performance of an automated procedure for comparative modelling of protein tertiary structure

A 3-D model of a protein can be constructed from its amino acidsequence and the 3-D structures of one or more homologues byannealing three sets of fragments: the structurally conservedregions, structurally variable regions and the side chains.The method encoded in the computer program COMPOSER was assessedby generating 3-D models of eight proteins whose crystal structuresare already known and for which 3-D structures of homologuesare available. In the structurally conserved regions, differencesbetween modelled and X-ray structures are smaller than the differencesbetween the X-ray structures of the modelled protein and thehomologues used to build the model. When several homologuesare used, the contributions of the known structures are weighted,preferably by the square of sequence similarity; this is especiallyimportant when the similarities of the homologues to the modelledstructure differ greatly. The ‘collar’ extensionapproach, in which a similar region of different length in ahomologue is used to extend the framework, can result in a moreaccurate model. If known homologues comprise more than one relatedgroup of proteins and they are both distantly related to theunknown, then alignment of the sequence to be modelled witheach group of homologues facilitates identification of structurallyconserved regions of the unknown and leads to an improved model.Models have root mean square differences (r.m.s.d.s) with thestructures defined by X-ray analysis of between 0.73 and 1.56Å for all C atoms, for seven of the eight models. Forthe model of mucor pepsin, where the closest homologue has 33%sequence identity and 20% of the residues are in structurallyvariable regions, the r.m.s.d. for the framework region is 1.71Å and the r.m.s.d. for all C atoms is 3.47 Â.     

Effects of curtailment on an admissions model for a graduate management program.

Developed 2 admissions models to predict future academic performance of graduate management students. The 1st model was based on 40 students who were admitted and enrolled in the program and was uncorrected for curtailment. The 2nd model was developed from the total applicant population of 222 students after curtailment correction. The corrected model demonstrated higher predictive validity than the uncorrected model for 2 future classes of students. Furthermore, different predictors entered each model, affecting the beta weights, validities of predictors, and the total amount of variance explained by the models. A factor analysis and an analysis of admissions decisions offer additional support for the curtailment-corrected model in selecting students with high academic potential. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Identification of phenolic profiles,fatty acid compositions,antioxidant activities,and enzyme inhibition effects of seven wheat cultivars grown in Turkey: A phytochemical approach for their nutritional value

In the present article, seven wheat cultivars (Ahmetaga, Bezostaya, Dagdas-94, Ekiz, Karahan-99, Konya-2002, and Tosunbey) grown in Turkey were compared for their phytochemical composition, antioxidant, and enzyme inhibitory activities. Antioxidant capacities and enzyme inhibitory effects were investigated with colorimetric methods. Total phenolic content ranged from 40.71 to 86.34 mg of gallic acid equivalent/100 g wheat grain. Tosunbey (92 mg Trolox equivalent/100 g wheat grain) and Ahmetaga (114.56 mg Trolox equivalent/100 g wheat grain) cultivars exhibited strong 2,2 azino-bis (3-ethylbenzothiazloine-6-sulfonic acid) and 1,1-diphenyl-2-picrylhydrazyl free radical scavenging activities. As compared to other wheat cultivars, Tosunbey cultivar had remarkable both antioxidant and enzyme inhibitory effects with the highest level of phenolics. Ferulic acid, chlorogenic acid, and apigenin were the major phenolics in extracts tested. This study suggested that an increased intake of wheat derived products could represent an effective strategy for the management of oxidative stress related chronic and degenerative diseases such as Alzheimers and diabetes mellitus.