A Highly Active and Selective Manganese Oxide Promoted Cobalt-on-Silica Fischer�CTropsch Catalyst

A highly active and selective manganese oxide-promoted silica-supported cobalt catalyst for the Fischer?CTropsch reaction is reported. Co/MnO/SiO₂ catalysts were prepared via impregnation of a cobalt nitrate and manganese nitrate precursor, followed by drying and calcination in an NO/He flow. The catalysts were studied with STEM?CEELS, infrared spectroscopy measurements of adsorbed CO and Steady-State Isotopic Transient Kinetic Analysis experiments. Based on those experiments, a relation between C₅₊-selectivity and surface-coverages of CH _x -intermediates on cobalt was found.     

Reduction of Sulfoxides to Sulfides in the Presence of Copper Catalysts

Abstract  

Copper complexes catalyze the reduction of aliphatic and aromatic sulfoxides in the presence of silanes as reducing reagent. The influence of different reaction parameters on the catalytic activity is investigated in detail. The scope and limitations of the described catalyst is demonstrated in the reduction of various sulfoxides. In most cases, high conversion and excellent chemoselectivity are obtained.     

Protein Engineering of the Progesterone Hydroxylating P450‐Monooxygenase CYP17A1 Alters Its Regioselectivity

The CYP171 enzyme is known to catalyse a key step in the steroidogenesis of mammals. The substrates progesterone and pregnenolone are first hydroxylated at the C17 position, and this is followed by cleavage of the C17?C20 bond to yield important precursors for glucosteroids and androgens. In this study, we focused on the reaction of the bovine CYP17A1 enzyme with progesterone as a substrate. On the basis of a created homology model, active‐site residues were identified and systematically mutated to alanine. In whole‐cell biotransformations, the importance of the N202, R239, G297 and E305 residues for substrate conversion was confirmed. Additionally, mutation of the L206, V366 and V483 residues enhanced the formation of the 16α‐hydroxyprogesterone side product up to 40 % of the total product formation. Furthermore, residue L105 was found not to be involved in this side activity, which contradicts a previous study with the human enzyme.     

Acidity and porosity modulation of MWW type zeolites for Nopol production by Prins condensation

Prins condensation of β-pinene with paraformaldehyde was carried out over MCM-22, delaminated ITQ-2 and silica pillared MCM-36. The mesopore-containing MCM-36 and ITQ-2 catalysts exhibit higher conversion of β-pinene due to more exposed acid sites. Lewis acid sites are responsible for Prins condensation while Brønsted acid sites favor the isomerization of pinene. The Brønsted acid sites can be removed mostly by ion-exchanging the zeolites with sodium cations. Thus, NaMWW zeolites had a higher selectivity towards Nopol. Of these, NaITQ-2 showed the highest activity and selectivity, and is a stable and reusable catalyst for production of Nopol.     

Me-DLC films as material for highly sensitive temperature compensated strain gauges

In technical applications strain gauges are widely used. Apart from conventional polymer foil based strain gauges that are glued to the work piece surface, sputtered strain gauges are already commercially used in special applications. Those sputter strain gauges are typically made of NiCr alloy and the sensor layer is as sensitive to strain as the ones used in the glued strain gauges with a gauge factor of 2, but neglecting problems of creeping and swelling of the involved polymer materials. Diamond-like carbon (DLC) films offer significantly higher strain sensitivity, but usually they are also very sensitive to temperature effects. Using metal doped diamond-like carbon (Me-DLC), higher strain sensitivity than conventional metal based systems, in combination with thermal compensation, is possible. The influence of different process parameters on the gauge factor and temperature coefficient of resistance (TCR) of DLC and Me-DLC films produced in industrial sputtering systems was investigated. Gauge factors up to 13 in combination with a high negative TCR in the range of a few thousand ppm/K were reached with sputtered DLC films. The substrate bias voltage in particular showed a strong influence on the resulting gauge factor of the films. For Me-DLC films different deposition methods (dc and rf sputtering) and various doping metals (Ag, Ni, Ti, and W) were investigated. Using dc sputtering of the Me-DLC films only Ni-DLC showed gauge factors slightly higher than 2. Furthermore, only for Ni-DLC zero crossing of the TCR was observed by variation of the metal content. Using rf excitation especially Ni-DLC films showed gauge factors exceeding values of 15 in combination with a TCR close to zero.     

Enhancing the temperature stability of PLA by compounding strategies

The low thermal stability of polylactid acid (PLA) limits its use for various applications such as microwave‐ready dishes or hot beverage packaging. Furthermore, contained items might be damaged by occurring temperature peaks during transport (e.g., shipping container internal temperature exceeds 80°C) or other usage (e.g., car dashboard heated by sun). The aim of this study was the development of a PLA compound with an operating temperature above 100°C. Therefore, different formulations (e.g., stereocomplex of PLLA and PDLA, cross‐linking of PLA or use of commercial additives) were identified and compounds with varying conditions produced and tested regarding their thermal and mechanical properties. The results showed clearly possible routes for improving the thermal properties of PLA. Using such compounds respectively processing routes and additives helps to overcome one of the most significant problems when using PLA. The higher operating temperature of this biopolymer will lead to a wider field of application and will avoid shipping hazards. POLYM. ENG. SCI., 55:2849–2858, 2015. © 2015 Society of Plastics Engineers     

Aqueous Surfactant Two‐Phase Systems for the Continuous Countercurrent Cloud Point Extraction

Aqueous nonionic surfactant solutions split into two phases if the temperature is increased beyond a certain temperature, the so‐called cloud point temperature. Presently many different types of nonionic surfactants are produced commercially, out of these numerous have been considered as potential solvent for the cloud point extraction. In this work the crucial thermophysical properties of nonionic surfactants are investigated to determine the potential of surfactant systems for extraction processes. Phase equilibria of the binary system Triton X‐114/water and the ternary system Triton X‐114/water/phenol were measured. Based on these data the cloud point extraction was implemented in a continuous stirred extraction column. It was found, that increasing temperature within the column reduces the loss of surfactant and leads to an increasing enrichment factor. This work demonstrates that surfactant/water systems represent a suitable alternative to conventional solvents and can effectively be processed in continuous extraction columns.