Ferroelectric Materials: Probing Local and Global Ferroelectric Phase Stability and Polarization Switching in Ordered Macroporous PZT (Adv. Funct. Mater. 5/2011)

We describe the characterization, ferroelectric phase stability and polarization switching in strain‐free assemblies of PbZr_0.3Ti_0.7O₃ (PZT) nanostructures. The 3‐dimensionally ordered macroporous structures present uniquely large areas and volumes of PZT where the microstructure is spatially modulated and the composition is homogeneous. Variable temperature powder X‐ray diffraction (XRD) studies show that the global structure is crystalline and tetragonal at room temperature and undergoes a reversible tetragonal to cubic phase transition on heating/cooling. The measured phase‐transition temperature is 50–60 °C lower than bulk PZT of the same composition. The local ferroelectric properties were assessed using piezoresponse force spectroscopy that reveal an enhanced piezoresponse from the nanostructured films and demonstrate that the switching polarization can be spatially mapped across these structures. An enhanced piezoresponse is observed in the nanostructured films which we attribute to the formation of strain free films, thus for the first time we are able to assess the effects of crystallite‐size independently of internal stress. Corresponding polarization distributions have been calculated for the bulk and nanostructured materials using a direct variational method and Landau‐Ginzburg‐Devonshire (LGD) theory. By correlating local and global characterization techniques we have for the first time unambiguously demonstrated the formation of tetragonal and ferroelectric PZT in large volume nanostructured architectures. With the wide range of materials available that can be formed into such controlled architectures we conclude that this study opens a pathway for the effective studies of nanoscale ferroelectrics in uniquely large volumes.     

Multiplexed protein quantification with barcoded hydrogel microparticles

We demonstrate the use of graphically encoded hydrogel microparticles for the sensitive and high-throughput multiplexed detection of clinically relevant protein panels in complex media. Combining established antibody capture techniques with advances in both microfluidic synthesis and analysis, we detected 1-8 pg/mL amounts of three cytokines (interleuken-2, interleuken-4, and tumor necrosis factor alpha) in single and multiplexed assays without the need for filtration or blocking agents. A range of hydrogel porosities was investigated to ensure rapid diffusion of targets and reagents into the particle as well as to maintain the structural integrity of particles during rinsing procedures and high-velocity microfluidic scanning. Covalent incorporation of capture antibodies using a heterobifunctional poly(ethylene glycol) linker enabled one-step synthesis and functionalization of particles using only small amounts of valuable reagents. In addition to the use of three separate types of single-probe particles, the flexibility of the stop-flow lithography (SFL) method was leveraged to spatially segregate the three probes for the aforementioned target set on an individual encoded particle, thereby demonstrating the feasibility of single-particle diagnostic panels. This study establishes the gel-particle platform as a versatile tool for the efficient quantification of protein targets and significantly advances efforts to extend the advantages of both hydrogel substrates and particle-based arrays to the field of clinical proteomics.     

Effect of carrier fluid viscosity on retention time and resolution in gravitational field-flow fractionation

Gravitational field-flow fractionation (GrFFF) is a useful technique for fast separation of micrometer-sized particles. Different sized particles are carried at different velocities by a flow of fluid along an unobstructed thin channel, resulting in a size-based separation. They are confined to thin focused layers in the channel thickness where force due to gravity is exactly opposed by hydrodynamic lift forces (HLF). It has been reported that the HLF are a function of various parameters including the flow rate (or shear rate), the size of the particles, and the density and viscosity of the liquid. The dependence of HLF on these parameters offers a means of altering the equilibrium transverse positions of the particles in GrFFF, and hence their elution times. In this study, the effect of the viscosity of the carrier fluid on the elution behavior (retention, zone broadening, and resolution) of micrometer-sized particles in GrFFF was investigated using polystyrene (PS) latex beads as model particles. In order to change the carrier liquid viscosity without affecting its density, various amounts of (hydroxypropyl) methyl cellulose (HPMC) were added to the aqueous carrier liquid. It was found that particles migrate at faster rates as the carrier viscosity is increased, which confirms the dependence of HLF on viscosity. At the same time, particle size selectivity decreased but peak shape and symmetry for the more strongly retained particles improved. As a result, separation was improved in terms of both the separation time and resolution with increase of carrier viscosity. A theoretical model for plate height in GrFFF is also presented, and its predictions are compared to experimentally measured values.     

IR and UV photodissociation as analytical tools for characterizing lipid A structures

The utility of 193-nm ultraviolet photodissociation (UVPD) and 10.6-μm infrared multiphoton dissociation (IRMPD) for the characterization of lipid A structures was assessed in an ion trap mass spectrometer. The fragmentation behavior of lipid A species was also evaluated by activated-electron photodetachment (a-EPD), which uses 193-nm photons to create charge reduced radicals that are subsequently dissociated by collisional activation. In contrast to collision-induced dissociation (CID), IRMPD offered the ability to selectively differentiate product ions with varying degrees of phosphorylation because of the increased photoabsorption cross sections and thus dissociation of phosphate-containing species. Both 193-nm UVPD and a-EPD yielded higher abundances and a larger array of product ions arising from C-C cleavages, as well as cross-ring and inter-ring glucosamine cleavages, compared to CID and IRMPD, because of high energy, single-photon absorption, and/or radical-directed dissociation. UVPD at 193 nm also exhibited enhanced cleavage between the amine and carbonyl groups on the 2- and 2'-linked primary acyl chains. Lastly, UVPD of phosphorylethanolamine-modified lipid A species resulted in preferential cleavage of the C-O bond between ethanolamine and phosphate, enabling the selective identification of this modification.     

A reproducible and high-throughput HPLC/MS method to separate sarcosine from α- and β-alanine and to quantify sarcosine in human serum and urine

While sarcosine was recently identified as a potential urine biomarker for prostate cancer, further studies have cast doubt on its utility to diagnose this condition. The inconsistent results may be due to the fact that alanine and sarcosine coelute on an HPLC reversed-phase column and the mass spectrometer cannot differentiate between the two isomers, since the same parent/product ions are generally used to measure them. In this study, we developed a high-throughput liquid chromatography-mass spectrometry (LC-MS) method that resolves sarcosine from alanine isomers, allowing its accurate quantification in human serum and urine. Assay reproducibility was determined using the coefficient of variation (CV) and intraclass correlation coefficient (ICC) in serum aliquots from 10 subjects and urine aliquots from 20 subjects across multiple analytic runs. Paired serum/urine samples from 42 subjects were used to evaluate sarcosine serum/urine correlation. Both urine and serum assays gave high sensitivity (limit of quantitation of 5 ng/mL) and reproducibility (serum assay, intra- and interassay CVs < 3% and ICCs > 99%; urine assay, intra-assay CV = 7.7% and ICC = 98.2% and interassay CV = 12.3% and ICC = 94.2%). In conclusion, this high-throughput LC-MS method is able to resolve sarcosine from α- and β-alanine and is useful for quantifying sarcosine in serum and urine samples.     

Microfluidic transendothelial electrical resistance measurement device that enables blood flow and postgrowth experiments

Transendothelial electronic resistance (TEER) measurements are performed across a cell layer immobilized on a microfluidic device that also enables the cell layer to interact with a flowing stream of red blood cells (RBCs). A bipolar pulsed square wave potential is applied across a monolayer of bovine pulmonary artery endothelial cells, and the resulting current response is measured and integrated. The overall impedance of the cell layer provides an indicator of cell layer integrity. After cell seeding on the device, a decrease in TEER signal from 22.3 ± 1.6 μC to 3.5 ± 0.4 μC (corresponding to a resistance of 40.9 ± 2.9 Ω·cm(2) to 259.1 ± 27.4 Ω·cm(2)) was observed after 8 h of cell growth. Intracellular nitric oxide (NO) production by the immobilized endothelial cells that had reached confluence was 34% higher than those cells that had not reached confluence, as indicated by the integrated TEER system. Importantly, this NO production by the confluent endothelium was stimulated by ATP released from RBCs flowing under the endothelial cells. In this construct, the described microfluidic device enables both a TEER-based evaluation of cell layer integrity and molecularly communicated interactions of these cells with a flowing stream of blood components.     

Isotope dilution liquid chromatography - mass spectrometry methods for fat- and water-soluble vitamins in nutritional formulations

Vitamins are essential to human health, and dietary supplements containing vitamins are widely used by individuals hoping to ensure they have adequate intake of these important nutrients. Measurement of vitamins in nutritional formulations is necessary to monitor regulatory compliance and in studies examining the nutrient intake of specific populations. Liquid chromatographic methods, primarily with UV absorbance detection, are well established for both fat- and water-soluble measurements, but they do have limitations for certain analytes and may suffer from a lack of specificity in complex matrices. Liquid chromatography-mass spectrometry (LC-MS) provides both sensitivity and specificity for the determination of vitamins in these matrices, and simultaneous analysis of multiple vitamins in a single analysis is often possible. In this work, LC-MS methods were developed for both fat- and water-soluble vitamins and applied to the measurement of these analytes in two NIST Standard Reference Materials. When possible, stable isotope labeled internal standards were employed for quantification.     

Measuring the optical properties of astrophysical dust analogues: instrumentation and methods

Dust is found throughout the universe and plays an important role for a wide range of astrophysical phenomena. In recent years, new IR facilities have provided powerful new data for understanding these phenomena. However, interpretation of these data is often complicated by a lack of complementary information about the optical properties of astronomically relevant materials. The Optical Properties of Astronomical Silicates with Infrared Techniques (OPASI-T) program at NASA's Goddard Space Flight Center is designed to provide new high-quality laboratory data from which we can derive the optical properties of astrophysical dust analogues. This program makes use of multiple instruments, including new equipment designed and built specifically for this purpose. The suite of instruments allows us to derive optical properties over a wide wavelength range, from the near-IR through the millimeter, also providing the capability for exploring how these properties depend upon the temperature of the sample. In this paper, we discuss the overall structure of the research program, describe the new instruments that have been developed to meet the science goals, and demonstrate the efficacy of these tools.     

Flexible null test for form measurement of highly astigmatic surfaces

We report the application of interferometry to the form measurement of a family of highly astigmatic optical surfaces. These measurements are based on a null test that employs a double-pass off-axis test arrangement with a tilted test surface and a reference sphere. This arrangement provides a perfect null test for an ellipsoid of revolution, or prolate spheroid. Its application is illustrated in detail in the presentation of results for the measurement of a specific family of eight differing surfaces that are incorporated into the K-Band Multi-Object Spectrometer Integral Field Unit. All surfaces measured here are sufficiently close to a prolate spheroid to justify its practical application. We discuss the application of the technique as a flexible low-cost approach for the generation of null interferograms in the measurement of a variety of complex surfaces.