Chemical and Physical Signals Mediating Conspecific and Heterospecific Aggregation Behavior of First Instar Stink Bugs

We investigated cues that mediate the aggregation behavior of immature pentatomid bugs by using nymphs of six different pentatomid bug species (Nezara viridula, Acrosternum hilare, Chlorochroa ligata, Chlorochroa sayi, Thyanta pallidovirens, and Euschistus conspersus). When first instars of any two species were put together in a Petri dish, they readily formed heterospecific aggregations similar to their natural conspecific aggregations. The chemical profiles of first and second instar nymphs of each species were determined by solvent extraction with pentane, followed by GC-MS analysis. Immature bugs of the different species had some compounds in common, and some that were more species specific. Within a species, there were distinct differences in the profiles of compounds extracted from first and second instars. Bugs did not aggregate around untreated polysulfone beads (1 mm diam) that were glued together in groups approximating bug egg masses, suggesting that tactile cues alone were insufficient to induce aggregation. Furthermore, when tested over a range of doses, groups of polysulfone beads treated with crude whole-body extracts of bugs did not induce or maintain aggregations. However, first instar N. viridula nymphs did respond to beads treated with two of the three major components of bug extracts. 4-Oxo-(E)-2-decenal induced significant aggregations at two doses, whereas tridecane, the major component in extracts from all six species, did not, and (E)-2-decenal was repellent. The repellence of (E)-2-decenal may explain why we and previous researchers were unable to induce aggregations of first instar N. viridula using whole-body extracts.     

Dynamic mechanical analysis of polymers in the liquid state: Use of a perforated shim stock support

This report summarizes some initial results on the use of a perforated brass shim stock support to extend the useful range of dynamic mechanical testing well over 100 degrees above the traditional limiting polymer softening points of T_g or T_m. Weak secondary relaxations were observed above T_g in both polyisobutylene (PIB) and polystyrene (PS) homopolymer, copolymer, and blend systems and above T_m in gutta percha (trans-polyisoprene). The DuPont 981 Dynamic Mechanical Analyzer (DMA)–990 Thermal Analyzer system was used to characterize these weak liquid state processes. The DMA instrument deforms the specimen in flexure, thus minimizing the shear component present in some other techniques. Specimen-coating weights are typically in the range 20–40 mg. The perforations are particularly useful for polymers having low inherent adhesion to metals or systems which are very brittle in the glassy state, e.g., low MW PS's and many methacrylates.     

Development of density distributions in injection molded amorphous engineering plastics. Part I

The gapwise density distributions of the injection molded specimens of two engineering thermoplastics, i.e., poly(phenylene ether) and poly(ether imide), were characterized employing the density gradient column technique. The samples were molded using a 40t Van Dorn injection molding machine. The effects of the thermal history on the density distribution of unconstrained quenched specimens were also investigated. In addition, various material properties, such as pressure-volume-temperature, isothermal contraction, and pressure induced densification behavior were characterized, for the two resins employed in this study. The moldings of the two resins exhibited different trends in their density distributions. These findings were explained in terms of the competing effects of cooling rate and the pressure history experienced by the engineering plastic resins during the molding cycle. The data collected were also used as input to mathematical modeling of density distributions in injection molded articles, which is reported in Part II of this article.     

Thermomechanical analysis of Tg and T > Tg transitions in polystyrene

Phenomenological softening points were measured on a series of 13 anionic, nearly monodisperse, atactic polystyrenes using a DuPont 943 thermomechanical analyzer (TMA) in a penetration mode. Although TMA cannot identify the nature of the “transition” observed as such, the results obtained support the evidence for the T_g, T_ll, and T′_ll transition in polystyrene discussed in recent literature. T_g and T_ll were found to vary with molecular weight in a systematic manner, while T′_ll could only be observed at very high molecular weight. The technique appears to be quite useful in offering rapid and reproducible information on the various transitions in the liquid state of polystyrene.     

Viscosity index. I. Evaluation of selected copolymers incorporating n-octadecyl acrylate as viscosity index improvers

Compositionally and structurally varied copolymers all containing n-octadecyl acrylate were prepared and evaluated as viscosity index improvers in a common base oil under conditions of low shear. Systems evaluated over a range of copolymer and blend composition were: copolymers of n-octadecyl acrylate with, respectively, methyl methacrylate, 2-ethylhexyl acrylate, and n-dodecyl acrylate; and homopolymers of poly(n-octadecyl acrylate), prepared with a wide range of molecular weights. Properties were compared with those of blends of commercial methacrylate copolymers (acryloids) which had been freed of their entraining liquid. Mixtures of base oil with copolymers of n-octadecyl acrylate and methyl methacrylate, compared at fixed SAE viscosities, were the most efficient of all blends studied. They had the smallest rate of change of viscosity with temperature (as measured by their ASTM slopes), particularly in the composition region of incipient polymer precipitation at room temperature. Efficiency of certain of these composition was somewhat greater than that of the acryloids. A parameter that related concentration and weight-average molecular weight was used to correlate all of the data for ASTM slope and viscosity. Empirical relations developed by using this parameter enabled rheological data to be estimated that agree within 6% of experimental values for the case of thermodynamically good base oil solvents. These data demonstrated the relatively small contributions of copolymer structure to viscosity index improvement.     

Influence of Phenolic acids on microbial populations in the rhizosphere of cucumber

Experiments were conducted to determine whether changes in soil microbial populations that occur in response to additions of certain allelopathic phenolic acids to bulk soil also occur in the rhizosphere. Cucumber seedlings were transplanted into cups containing a nutrient-enriched mixture of Portsmouth B₁, soil and sand and were watered five times (once every 48 hr) with aqueous solutions of ferulic,p-coumaric, or vanillic acid (each at 0, 0.25, or 0.50ol/g soil material). Nutrient solution was applied on alternate days. Leaf growth was suppressed by up to 42% by phenolic acids, but changes in root growth varied with the compound and concentration in solution. Significant increases (over 600% relative to controls) in populations of fast-growing bacteria in the rhizosphere were detected after two but not after five treatments, and increases (400% relative to controls) in numbers of fungal propagules were detected after five treatments. Such increases suggested that chronic exposure to a phenolic acid might resuit in high populations of rhizosphere microorganisms that could metabolize the compounds and thus alter observable responses by the plant. To test this, plants were watered repeatedly with a low-concentration solution of ferulic acid (chronic treatments; 0.0 or 0.1mol/g soil material in one experiment, 0.000 or 0.025imol/g soil material in a second) and then once with a highconcentration solution (acute treatment; 0.0, 0.5, or 1.0mol/g soil material in the first experiment; 0.000, 0.125, or 0.250mol/g soil material in the second).Paper No. 12385 of the Journal Series of the North Carolina Agricultural Research Service, Raleigh, North Carolina. The use of trade names in this publication does not imply endorsement by the North Carolina Agricultural Research Service or the United States Department of Agriculture of the products named, nor criticism of similar ones not mentioned. Acute treatments and some chronic treatments suppressed leaf growth, but results were inconsistent for root growth. Acute treatments increased numbers of several types of bacteria in the rhizosphere but had inconsistent effects on fungi. Chronic treatments had no effect on numbers of bacteria or fungal propagules in the rhizosphere. Furthermore, chronic treatments did not alter responses of plants or microbial populations to the subsequent acute treatment. Results demonstrated that phenolic acids in soil, which must pass through the rhizosphere before interaction with plant roots can occur, alter the microbial ecology of the rhizosphere. However, microbially mediated acclimation of plants to relatively high concentrations of ferulic acid was not observed.     

Nitrogen removal using recycled polystyrene bottles as biofilm media

The performance of an attached growth wastewater treatment process was investigated in an effort to improve nitrogen removal efficiency. Recycled Yakult (lactic acid fermentation drink) bottles made of polystyrene were used as a biofilm media. The use of Yakult bottles as a biofilm media has been attempted by numerous researchers in Japan for the removal of solids and organics. However, these studies focused only on the removal of solids and organics. This study extended their application to the removal of nitrogen for domestic sewage treatment. Yakult media was placed in a reactor with 70% apparent reactor volume in a conventional A/O process. The bottom of the Yakult media was removed, and randomly filled Yakult media were effectively able to reduce the flow in tanks, resulting in an increase in the contact time between pollutants and microorganisms. With higher HRT, the nitrogen removal efficiency was increased by up to 83% with 12 hr of HRT. Nitrification appeared to be the limiting factor of nitrogen removal at an HRT that is less than 12 hr, indicating that the Yakult process requires more retention time to achieve nitrification compared to other biofilm processes. The removal efficiencies of organics and solids were high regardless of the change of operational parameters. This article is based on a presentation in “The 7th Korea-China Workshop On Advanced Materials” organized by the Korea-China Advanced Materials Cooperation Center and the China-Korea Advanced Materials Cooperation Center, held at Ramada Plaza Jeju Hotel, Jeju Island, Korea on August 24–27, 2003.     

User Satisfaction with Tablet PC Features

Previous studies of tablet personal computers have concentrated on their use in education and healthcare. The current study focused instead on personal usage, investigating how satisfied users are with their own tablets after having used them in their daily lives. The objective was to identify the major features for tablets and to investigate how form factors affect the preference of functions by performing a comparison of iPad1 and Galaxy Tab. Also, gender and ethnicity were analyzed to determine whether they influence satisfaction with the devices. For e‐mail and web browsing functions, users’ ratings showed more satisfaction with the iPad1 since it has a larger display; for the e‐book reader function, users indicated higher satisfaction with the Galaxy Tab. Male users evaluated their devices by the function itself, whereas female users were mainly concerned with aesthetic aspects. Koreans indicated that they were less satisfied with their tablets than were other ethnic groups.