Propylsulfonic acid-functionalized partially crystalline silicalite-1 materials: synthesis and characterization

Propylsulfonic acid-functionalized partially crystalline silicalite-1 materials were synthesized via one step co-condensation technique by varying the molar ratio of organosilane source, 3-mercaptopropyltrimethoxysilane (3MP) to tetraethylorthosilicate (TEOS) in the range of 0.05–0.30, and subsequent oxidation of thiol group to propylsulfonic acid using hydrogen peroxide (H₂O₂). These materials were characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM) and nitrogen adsorption–desorption method. The structure of these materials was determined by Fourier transform infrared spectroscopy (FT-IR) and ²⁹Si and ¹³C solid state NMR. XRD results show that % crystallinity of the materials decreased with the increase in 3MP concentration in the synthesis mixture. Selected area electron diffraction (SAED) showed the presence of crystalline and amorphous phases in the samples. An amorphous phase was formed when 3MP concentration was 30 mol% of the total silica source. After elimination of the structure directing agent (SDA) by calcination at 420 °C, thermogravimetric analysis (TGA) shows that the structure was thermally stable up to 550 °C. Ammonia temperature-programmed desorption (NH₃-TPD) shows that the acid capacity of these materials was in the range of 1.19–1.83 mmol H⁺/g, which shows that these materials could be used as potential heterogeneous acid catalyst.     

Enzymatic membrane reactors: the determining factors in two separate phase operations

A two separate phase‐enzymatic membrane reactor is an attractive process since it has a large interfacial area and exchange surfaces, simultaneous reaction and separation and other benefits. Many factors influence its successful operation, and these include characteristics of the enzyme, membrane, circulating fluids and reactor operations. Although the operating conditions are the main factor, other factors must be considered before, during or after its application. At the initial stage of reactor development, the solubility of substrates and products, type of operation, membrane material and size, enzyme preparation and loading procedure, and cleanliness of the recirculated fluids should be specified. The immobilization site, reactor arrangement, dissolved or no‐solvent operation, classic or emulsion operation and immobilized or suspended enzyme(s) are determined later. Some factors still need further studies. Utilization of the technology is described for use from multigram‐ to plant‐scale capacity to process racemic and achiral compounds. The racemates were resolved primarily by kinetic resolution, but dynamic kinetic resolution has been exploited. The technology focused on hydrolytic reactions, but esterification processes were also exploited. Copyright © 2011 Society of Chemical Industry     

Photoelastic Measurement of High Stress Profiles in Ion-Exchanged Glass

Photoelastic fringes were directly measured to fully characterize high magnitude, steep compressive stress gradients in an ion-exchanged glass, trade named Ion-Armor™. Initially, using a thick (9.9 mm) rectangular bar and circular polariscope arrangement the overall residual stress profile in a bulk specimen was determined. However, due to the relatively large thickness of the specimen, the high density of fringes (steep stress gradient) close to the edge of the specimen became too diffused to allow an accurate count of fringe order. A thinner (0.71 mm) specimen was then used along with a polarizing light microscope to enhance the fringe contrast. This arrangement yielded approximately four isochromatic fringes, representing a maximum surface compressive stress of 984 MPa, which rapidly decreased to ~300 MPa within 25 μm depth from the strengthened surface. Also, the case-depth of the ion-exchange process was found to be 0.8 mm. Thus, the technique was able to directly capture the extremely high residual compressive stresses generated in an ion-exchanged glass. The current technique utilized for residual stress measurement is more objective and straightforward to implement than what is specified in ASTM standard C-1422, particularly for those specimens having steep stress gradients just below the strengthened surface.     

Genome-Wide Identification and Characterization of PIN-FORMED (PIN) Gene Family Reveals Role in Developmental and Various Stress Conditions in Triticum aestivum L.

PIN-FORMED (PIN) genes play a crucial role in regulating polar auxin distribution in diverse developmental processes, including tropic responses, embryogenesis, tissue differentiation, and organogenesis. However, the role of PIN-mediated auxin transport in various plant species is poorly understood. Currently, no information is available about this gene family in wheat (Triticum aestivum L.). In the present investigation, we identified the PIN gene family in wheat to understand the evolution of PIN-mediated auxin transport and its role in various developmental processes and under different biotic and abiotic stress conditions. In this study, we performed genome-wide analysis of the PIN gene family in common wheat and identified 44 TaPIN genes through a homology search, further characterizing them to understand their structure, function, and distribution across various tissues. Phylogenetic analyses led to the classification of TaPIN genes into seven different groups, providing evidence of an evolutionary relationship with Arabidopsis thaliana and Oryza sativa. A gene exon/intron structure analysis showed a distinct evolutionary path and predicted the possible gene duplication events. Further, the physical and biochemical properties, conserved motifs, chromosomal, subcellular localization, transmembrane domains, and three-dimensional (3D) structure were also examined using various computational approaches. Cis-elements analysis of TaPIN genes showed that TaPIN promoters consist of phytohormone, plant growth and development, and stress-related cis-elements. In addition, expression profile analysis also revealed that the expression patterns of the TaPIN genes were different in different tissues and developmental stages. Several members of the TaPIN family were induced during biotic and abiotic stress. Moreover, the expression patterns of TaPIN genes were verified by qRT-PCR. The qRT-PCR results also show a similar expression with slight variation. Therefore, the outcome of this study provides basic genomic information on the expression of the TaPIN gene family and will pave the way for dissecting the precise role of TaPINs in plant developmental processes and different stress conditions.     

pH-Responsive and Reversible A-Motif-Based DNA Hydrogel: Synthesis and Biosensing Application**

Functional DNA hydrogels with various motifs and functional groups require perfect sequence design to avoid cross-bonding interference with themselves or other structural sequences. This work reports an A-motif functional DNA hydrogel that does not require any sequence design. A-motif DNA is a noncanonical parallel DNA duplex structure containing homopolymeric deoxyadenosines (poly-dA) strands that undergo conformation changes from single strands at neutral pH to a parallel duplex DNA helix at acidic pH. Despite this and other advantages over other DNA motifs like no cross-bonding interference with other structural sequences, the A-motif has not been explored much. We successfully synthesized a DNA hydrogel by using an A-motif as a reversible handle to polymerize a DNA three-way junction. The A-motif hydrogel was initially characterized by electrophoretic mobility shift assay, and dynamic light scattering, which showed the formation of higher-order structures. Further, we used imaging techniques like atomic force microscopy and scanning electron microscope to validating its hydrogel like highly branched morphology. pH-induced conformation transformation from monomers to gel is quick and reversible, and was analysed for multiple acid-base cycles. The sol-to-gel transitions and gelation properties were further examined in rheological studies. The use of the A-motif hydrogel in the visual detection of pathogenic target nucleic acid sequence was demonstrated for the first time in a capillary assay. Moreover, pH-induced hydrogel formation was observed in situ as a layer over the mammalian cells. The proposed A-motif DNA scaffold has enormous potential in designing stimuli-responsive nanostructures that can be used for many biological applications.     

Microstructural Evolution in Liquid-Phase-Sintered SiC: Part III, Effect of Nitrogen-Gas Sintering Atmosphere

Effects of N₂ sintering atmosphere and the starting SiC powder on the microstructural evolution of liquid-phase-sintered (LPS) SiC were studied. It was found that, for the β-SiC starting powder case, there was complete suppression of the β→α phase transformation, which otherwise goes to completion in Ar atmosphere. It was also found that the microstructures were equiaxed and that the coarsening was severely retarded, which was in contrast with the Ar-atmosphere case. Chemical analyses of the specimens sintered in N₂ atmosphere revealed the presence of significant amounts of nitrogen, which was believed to reside mostly in the intergranular phase. It was argued that the presence of nitrogen in the LPS SiC helped stabilize the β-SiC phase, thereby preventing the β→α phase transformation and the attendant formation of elongated grains. To investigate the coarsening retardation, internal friction measurements were performed on LPS SiC specimens sintered in either Ar or N₂ atmosphere. For specimens sintered in N₂ atmosphere, a remarkable shift of the grain-boundary sliding relaxation peak toward higher temperatures and very high activation energy values were observed, possibly due to the incorporation of nitrogen into the structure of the intergranular liquid phase. The highly refractory and viscous nature of the intergranular phase was deemed responsible for retarding the solution–reprecipitation coarsening in these materials. Parallel experiments with specimens sintered using α-SiC starting powders further reinforce these arguments. Thus, processing of LPS SiC in N₂ atmosphere open the possibility of tailoring their microstructures for room-temperature mechanical properties and for making high-temperature materials that are highly resistant to coarsening and creep.     

Microstructural Evolution in Liquid-Phase-Sintered SiC: Part I, Effect of Starting Powder

The effect of starting SiC powder (β-SiC or α-SiC), with simultaneous additions of Al₂O₃ and Y₂O₃, on the microstructural evolution of liquid-phase-sintered (LPS) SiC has been studied. When using α-SiC starting powder, the resulting microstructures contain hexagonal platelike α-SiC grains with an average aspect ratio of 1.4. This anisotropic coarsening is consistent with interface energy anisotropy in α-SiC. When using β-SiC starting powder, the β→α phase transformation induces additional anisotropy in the coarsening of platelike SiC grains. A strong correlation between the extent of β→α phase transformation, as determined using quantitative XRD analysis, and the average grain aspect ratio is observed, with the maximum average aspect ratio reaching 3.8. Based on these observations and additional SEM and TEM characterizations of the microstructures, a model for the growth of these high-aspect-ratio SiC grains is proposed.     

Molding of reprocessed thermoplastics with preplastication injection molding

The injection molding of reprocessed plastics with a preplastication plunger injection‐molding machine was investigated with a focus on the processing conditions. The process of the filling of the resin into the mold is much better controlled with preplastication than with processing in a conventional injection‐molding machine. Reprocessing of the resin leads to a reduction in molecular weight due to drastic changes in the resin morphology, thereby causing a reduction in melt viscosity. Direct experimental evidence for reduced viscosity was obtained from measurements of the filling pressure recorded on the machine and also with a melt‐flow indexer. The results of this study provide a practical solution for reducing the resin temperature when reprocessed resin is used in the injection molding of plastics. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1455–1461, 2001     

Interfacial interactions and properties of cellular structured polyurethane nanocomposite based on carbonaceous nano-fillers

In this article, we have studied the effect of carbonaceous nanofillers viz. fullerenol (0D), carboxylated multi-wall carbon nanotube (MWCNT, 1D), hydroxylated graphene (2D) and combination of carboxylated CNT and hydroxylated graphene as 3D in thermoplastic polyurethane on the tensile properties of the fabricated cellular structures. The concentration of nano-fillers was varied as 0.1, 1, and 5 wt%. Tensile properties of the nanocomposite cellular structures were measured as per ASTM D882 at 20°C (below glass transition temperature, T_g) and 40°C (above T_g). The results have shown that the tensile strength was found to increase by 200%–300% and the tensile modulus was found to increase by 150%–300% for 2D and 3D nano-fillers while significantly poor results were observed for 0D. However, the test data tensile strength and modulus showed marginal increase at 20°C and marginally low at 40°C for 1D filler. The interfacial adhesion was calculated by using experimental tensile data and the predictive models. The interfacial adhesion parameter (B_σ) calculated using Pukanszky equation was found significantly higher value for 2D (B_σ20 = 195.8) and 3D (B_σ20 = 192.0) fillers while poor adhesion was observed for 0D (B_σ20 = −81.6) fillers. The developed cellular structured materials were also evaluated by attenuated total reflection Fourier transform IR spectra, differential scanning calorimetry, X-ray diffraction, scanning electron microscope, and transmission electron microscope.     

Bionanofactories for Green Synthesis of Silver Nanoparticles: Toward Antimicrobial Applications

Among the various types of nanoparticles and their strategy for synthesis, the green synthesis of silver nanoparticles has gained much attention in the biomedical, cellular imaging, cosmetics, drug delivery, food, and agrochemical industries due to their unique physicochemical and biological properties. The green synthesis strategies incorporate the use of plant extracts, living organisms, or biomolecules as bioreducing and biocapping agents, also known as bionanofactories for the synthesis of nanoparticles. The use of green chemistry is ecofriendly, biocompatible, nontoxic, and cost-effective. We shed light on the recent advances in green synthesis and physicochemical properties of green silver nanoparticles by considering the outcomes from recent studies applying SEM, TEM, AFM, UV/Vis spectrophotometry, FTIR, and XRD techniques. Furthermore, we cover the antibacterial, antifungal, and antiparasitic activities of silver nanoparticles.