Shrinkage testimation of the shape parameter of an inverse Gaussian distribution using a (α + β)min test

In this paper, we propose a shrinkage testimator for the shape parameter λ of an Inverse Gaussian distribution when the estimated value of λ is available in such a way that either λ = λ₁ or λ = λ₂(>;λ₁) is expected. The (α + β)_min test for testing the hypothesis H₀: λ = λ₁ against H₁: λ = λ₂ is derived. The shrinkage factors are chosen to be the function of the (α + β)_min test. The shrinkage testimator is found to be more efficient (in the sense of the MSE) than the UMVUE in certain parametric space.     

Distribution of the carbide phase in the viscoplastic layer during the rotational friction-welding of various steels

The paper presents the viscoplastic phenomena observed during the rotational friction-welding process of high-speed steel M2 (AISI SAE) with carbon steel 1060 (AISI SAE). The structure, phase composition and distribution of the carbide phase in the friction plane and adjoining zones are examined by using optical microscopy (OM) with a system for quantitative analysis, and scanning electron microscopy (SEM) in addition to EDS analysis. The experimentally-checked mathematical relationship is suggested for the calculation of the radial movements of the carbide phase, immediately next to the friction plane. On the basis of qualitative and quantitative evaluation of the microstructural and rheological appearances, a model of carbide phase distribution is also established in the viscoplastic and viscous layers in the area of the friction plane.     

Reusable pouch development for long term space missions: A 3D ohmic model for verification of sterilization efficacy

One of the challenges of food system development during a long term space mission is the need for reheating of food, processing and stabilization of waste products, including food and biological waste. We have previously reported on the development of a pouch with electrodes, which permits reheating and sterilization of its internal contents, and the development of a two-dimensional heat transfer model for design optimization. However, a fully three-dimensional model is necessary for ensuring that thermal processes result in sterility of all parts of the product, particularly edge regions. The ohmic heating of tomato soup in a pouch was simulated using computational fluid dynamics (CFD) codes with user defined functions (UDFs) for electric field equations. In general, good agreement was observed between model and experiment, excepting a zone at the edge, where the model tended to underpredict temperature. The 3D model permitted identification of the potential cold spots over the entire pouch, which was not obvious using our previous 2D model. In particular, the bottom corners of the pouch were found to be a zone of low current density, and showed a temperature of only 53.3 °C even when the peak pouch temperature was 139 °C. The 3D model is a useful tool to optimize electrode configurations, and to assure adequate sterilization processes.     

A Scalable and High Capacity All-Optical Packet Switch: Design,Analysis, and Control

In this paper, a modular and scalable all-optical packet switch (AOPS) is proposed. The range of its capacity can be easily scaled from gigabit per second to multi-terabits per second. Due to its broadcast-and-select property, the proposed AOPS is capable of performing a multicast function. By taking the advantage of wavelength division multiplexing (WDM), this architecture can provide the best network performance using a limited number of optical fiber delay lines as buffers. To perform the header replacement function, a novel all-optical header replacement unit (HRU) is introduced to be integrated with the switching function. The proposed HRU is shared by all the inputs which provides cost advantages. In addition, we present a generic control scheme for the proposed AOPS. To implement the function of the AOPS, two possible approaches, based on the design of wavelength conversion pools (WCPs), are presented and their cascadability performances are compared. Our simulations show that the proposed AOPS with an arrayed waveguide grating (AWG) based WCP provides better cascadability performance than the one with a star coupler based WCP. We conclude that, based on the status of current optical and electronic technologies, the proposed architecture is feasible to be implemented, and can be a good candidate for future packet switching solutions.     

Lateral protrusions of ohmic contacts to AlGaAs/GaAs MODFET material

Cross-sectional transmission electron microscopy is used to determine the structure of Au-, Ge- and Ni-based ohmic contacts at the interface with AlGaAs/GaAs modulation-doped field-effect-transistor material. Significant lateral diffusion (?0.12?m) is found to occur at the edge of the contact during alloying. The observed contact structure places a limit on minimum geometries and must be taken into account if accurate device modelling is to be carried out.     

A slow wave structure and its application in bandpass filter design

This paper presents a new slow wave open-loop resonator filters with reduced size and improved stopband characteristics. A comprehensive treatment of different kind of coupling in this structure is demonstrated. Two and four resonator band pass filters at center frequency 2.15 and 2.30 GHz with different bandwidth are designed. The simulated results are verified with the help of two different software packages (IE3D and Sonnet Lite).     

Studies on the effect of epoxide equivalent weight of epoxy resins on thermal,mechanical, and chemical characteristics of vinyl ester resins

Three samples of vinyl ester resins (VERs) were synthesized using bisphenol‐A‐based epoxy resins of varying epoxide equivalent weights (EEW) and acrylic acid in presence of triphenylphosphine as a catalyst at 80 ± 2°C. The cresyl glycidyl ether was used as reactive diluent during the synthesis of VERs. A suitable reaction mechanism was proposed and discussed for the reactions involving epoxide group and acid groups. This was further confirmed by infrared spectroscopic analysis. The maximum peak temperature from DSC were at 106.05°C, 114.20°C, and 128.86°C for benzoyl peroxide initiated VERs viz. samples V₁C_V, V₂C_V, and V₃C_V, respectively, increased with the increase of EEW of the parent epoxy resin. It has also been found that the films of VER having highest EEW of bisphenol‐A epoxy resin showed best chemical resistance amongst all other VERs in this study. The mechanical properties such as hardness and flexibility also showed a similar trend. The thermal stability was found to decrease with the increase of EEW of bisphenol‐A epoxy resin in the VERs. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Reactivation and growth of non-culturable indicator bacteria in anaerobically digested biosolids after centrifuge dewatering

Recent literature has reported that high concentrations of indicator bacteria such as fecal coliforms (FCs) were measured in anaerobically digested sludges immediately after dewatering even though low concentrations were measured prior to dewatering. This research hypothesized that the indicator bacteria can enter a non-culturable state during digestion, and are reactivated during centrifuge dewatering. Reactivation is defined as restoration of culturability. To examine this hypothesis, a quantitative polymerase chain reaction (qPCR) method was developed to enumerate Escherichia coli, a member of the FC group, during different phases of digestion and dewatering. For thermophilic digestion, the density of E. coli measured by qPCR could be five orders of magnitude greater than the density measured by standard culturing methods (SCMs), which is indicative of non-culturable bacteria. For mesophilic digestion, qPCR enumerated up to about one order of magnitude more E. coli than the SCMs. After centrifuge dewatering, the non-culturable organisms could be reactivated such that they are enumerated by SCMs, and the conditions in the cake allowed rapid growth of FCs and E. coli during cake storage.     

Preparation of thermal resistant gas barrier chitosan nanobiocomposites

Nanobiocomposites of chitosan/clay were prepared by solution method using CuSO₄/glycine chelate complex as the catalyst with variable percentage of clay loading. The chemical interaction of chitosan and clay was studied by Fourier transform infrared spectroscopy. The structure of chitosan and clay nanobiocomposites was investigated by X‐ray diffraction and high resolution transmission electron microscopy. From thermogravimetric analysis, it was found that chitosan/clay nanobiocomposites were more thermally stable as compared to pure chitosan. A substantial reduction in oxygen permeability was obtained from the gas permeameter with increase in clay concentrations by which the synthesized nanocomposites materials may be used for packaging applications. POLYM. COMPOS., 35:2324–2328, 2014. © 2014 Society of Plastics Engineers