New approach to enhance adhesions between carbon nanotube emitters and substrate by the combination of electrophoresis and successive electroplating

Complementary electroplating combined with electrophoresis enhanced the field emission characteristics of emitters by improving the adhesions between CNT emitters and substrate. The emitting current of the CNT emitters prepared by our combined method increased nine times higher than that of CNT emitters prepared by electrophoresis only, since electroplating improved the adhesion of CNT emitters. During the life-time measurement for 10 h, the emitting current of CNT emitters fabricated by electrophoresis only was drastically decreased to 13% of the initial current, while that prepared by the combination of electrophoresis and successive electroplating decreased to 64% of the initial current. We suggest that our method is a promising approach for the efficient fabrication of reliable CNT emitters.     

Epitaxial growth of GaN on (0001) Al<Subscript>2</Subscript>O<Subscript>3</Subscript> via solution-cast seed layer formation process using Ga(mDTC)<Subscript>3</Subscript>

This paper reports an alternative method for the growth of GaN epitaxial layer on (0001) Al₂O₃ substrate by hot-wall vapor phase epitaxy technique. Tris (N,N-dimethyldithiocarbamato)-gallium (III), Ga(mDTC)₃ was introduced as a precursor material for the seed layer formation in the growth of GaN. Optimal growth conditions with seed layers formed by the Ga(mDTC)₃ concentration of 0.047 mol/L were identified: Growth temperature was found to be 850 °C, and optimal distance between the reactant outlet and substrate was determined to be 12.5 cm. Characterization results showed that this growth method produce high-crystallinity GaN epitaxial layers at a relatively lower growth temperature compared to the existing growth techniques and simplify the growth process.     

Notch in contrast sensitivity function of optical origin: diffraction effects of acrylic filters

It was for the first time that of the fifth year of monitoring of Plantago lanceolata L., reproduced within the thirty-kilometer zone of Chernobyl NPP disaster, the authors discovered high incidence of seedlings with various morphological abnormalities. It is suggested that the damages observed are related to the cumulative effect of radiation.     

Reconfigurable Microstrip Patch Antenna with Switchable Polarization

A novel reconfigurable microstrip patch antenna with frequency and polarization diversities is proposed. A U‐slot is incorporated into a square patch, and a PIN diode is utilized to switch the slot on and off, which realizes the frequency diversity characteristic. The polarization diversities among linear polarization (LP), right‐hand circular polarization (RHCP), and left‐hand circular polarization (LHCP) are also obtained by switching three PIN diodes on the slot and the truncating corners of a square patch on and off. The antenna design and experimental results are presented.     

A process-control and diagnostic tool based on continuous fuzzy Petri nets

The use of Petri nets and fuzzy logic in intelligent process control has caught the attention of many researchers. In this paper, a Continuous Fuzzy Petri Net (CFPN) tool which integrates the three technologies of fuzzy control, Petri nets and real-time expert systems is presented. The CFPN approach can deal with real-time continuous inferencing, for the purpose of process monitoring and diagnostics, at a high level in the presence of uncertainty. This tool has been implemented in the G2 real-time expert-system environment and is currently being used by ESSO Canada.     

Representation and reconstruction of polygons and polyhedra using Hierarchical Extended Gaussian Images

In this paper, two new representation schemes called the Branched Gaussian Image (BGI) and the Hierarchical Extended Gaussian Image (HEGI) are proposed. They can be used for uniquely representing both concave and convex, two-dimensional figures and three-dimensional objects. The representation by the Branched Gaussian Image involves several Gaussian spheres connected by branches where the traversing directions might be different. Examples showing how the use of the BGI enables us to achieve the mapping and inverse mapping of concave polygons and polyhedra uniquely are presented. The Gaussian spheres in the BGI can be organized into a tree-like hierarchical structure known as the Hierarchical Extended Gaussian Image. A general procedure for mapping a polygon or polyhedron to its HEGI representation is described. An approach for reconstructing concave polygons from Branched Gaussian Images is presented. The reconstruction of a concave polyhedron from its Hierarchical Extended Gaussian Images by using an iterative method or a closed-form method for each convex component is also described.     

High-Temperature Chemical Stability of Plasma-Sprayed Ca05Sr05Zr4P6O24 Coatings on Nicalon/SiC Ceramic Matrix Composite and Ni-Based Superalloy Substrates

The potential application of Ca05Sr05Zr4P6O24 (CS50) as a corrosion-resistant coating material for Si-based ceramics and as a thermal barrier coating material for Ni-based superalloys was explored. A ∼200 (xm thick CS50 coating was prepared by air plasma spray with commercially available powder. A Nicalon/SiC ceramic matrix composite and a Ni-based superalloy coated with a ∼200 (xm thick metallic bond coat layer were used as substrate materials. Both the powder and coating contained ZrP2O7 as an impurity phase, and the coating was highly porous as-deposited. The coating deposited on the Nicalon/SiC substrate was chemically stable upon exposure to air and Na2SO4/O2 atmospheres at 1000°C for 100 h. In contrast, the coating sprayed onto the superalloy substrate significantly reacted with the bond coat surface after similar oxidation in air.     

Reasoning about non-immediate triggers in biological networks

Modeling molecular interactions in signalling networks is important from various perspectives such as predicting side effects of drugs, explaining unusual cellular behavior and drug and therapy design. Various formal languages have been proposed for representing and reasoning about molecular interactions. The interactions are modeled as triggered events in most of the approaches. The triggering of events is assumed to be immediate: once an interaction is triggered, it should occur immediately. Although working well for engineering systems, this assumption poses a serious problem in modeling biological systems. Our knowledge about biological systems is inherently incomplete, thus molecular interactions are constantly elaborated and refined at different granularity of abstraction. The model of immediate triggers can not consistently deal with this refinement. In this paper we propose an action language to address this problem. We show that the language allows for refinements of biological knowledge, although at a higher cost in terms of complexity.      

Determination of the in situ forces and force distribution within the human anterior cruciate ligament

The in situ forces and their distribution within the human anterior cruciate ligament (ACL) can clarify this ligament's role in the knee and help to resolve controversies regarding surgical treatment of ACL deficiency. We used a universal force-moment sensor (UFS) to determine the magnitude, direction, and point of application of the in situ forces in the ACL in intact human cadaveric knees. Unlike previous studies, this approach does not require surgical intervention, the attachment of mechanical devices to or near the ACL, or a priori assumptions about the direction of in situ force. Anterior tibial loads were applied to intact knees, which were limited to 1 degree of freedom at 30 degrees flexion. The in situ forces developed in the ACL were lower than the applied force for loads under 80 N, but larger for applied loads of more than 80 N. The direction of the force vector corresponded to that of the anteromedial (AM) portion of the ACL insertion on the tibial plateau. The point of force application was located in the posterior section of the anteromedial portion of the tibial insertion site. The anterior and posterior aspects of the anteromedial portion of the ACL supported 25% and 70% of the in situ force, respectively, with the remainder carried by the posterolateral portion. We believe that the data obtained with this new UFS methodology improves our understanding of the role of the ACL in knee function, and that this methodology can be easily extended to study the function of other ligaments.