Phytic acid and extractable phosphorus of pearl millet flour as affected by natural lactic acid fermentation

Lactic acid fermentation of pearl millet flour decreased its phytic acid content and increased extractable phosphorus. Fermentation at 40 and 50°C for 72 h or longer eliminated phytic acid almost completely; extractable phosphorus was more than doubled. Lower temperatures (20 and 30°C) were less effective. The changes in concentration of phytic acid and extractable phosphorus may be attributed partly to phytase activity inherent in pearl millet flour.     

Dielectric relaxation and conduction mechanism of complex perovskite Ca0.90Sr0.10Cu3Ti3.95Zn0.05O12 ceramic

In this work, Sr and Zn co-doped calcium copper titanate having nominal formula Ca_0.90Sr_0.10Cu₃Ti_3.95Zn_0.05O₁₂ has been synthesized and systematically studied for structure, dielectric and electrical properties. The phase purity of the prepared composition has been confirmed by X-ray diffraction (XRD) pattern and various structural parameters are presented here with Rietveld refinement data. The Scanning electron microscopy (SEM) image revealed the presence of homogeneous fine-grained microstructure investigated in the prepared ceramic. The impedance data well fitted with 2 R-CPE model confirmed the non-ideality of the system. Dielectric studies have shown the existence of two relaxation processes in low and high frequency domains. Low frequency dielectric response proposed as a combination of Maxwell-Wagner relaxation and intrinsic defect (V_o⁺⁺) while high frequency behavior has been interpreted in terms of polaronic relaxation caused by hopping process of an electron between Ti³⁺ and Ti⁴⁺ states. The frequency dependent behavior of conductivity has been well fitted to Dong’s model and interpreted in term of Overlapping Large Polaron Tunneling (OLPT) mechanism. The various parameters; relaxation angular frequency (ω₁) of Debye process, ionic hopping frequency (ω₂₎, dc conductivity (σ_o), cole- cole parameter (α) and frequency exponent (s) have been determined by Dong’s Model fitting.     

Enhancement of thermal properties of polyacrylonitrile by reinforcement of Mg‐Al layered double hydroxide

The in situ polymerization technique was used for synthesis of polyacrylonitrile nanocomposites (PAN/LDH) by reinforcement of different concentrations of Mg‐Al layered double hydroxide (LDH). Molecular interaction between Mg/Al LDH and PAN matrix was studied by Fourier transform infrared spectroscopy. The morphology of PAN/LDH nanocomposite was investigated by field emission scanning electron microscopy. Energy dispersive spectroscopy of nanocomposites were noticed to establish the elemental composition of the composite. High resolution transmission electron microscopy was used to study the nanostructural distribution of LDH with PAN matrix, whereas crystalline patterns were explained by selected area electron diffraction studies. The thermal properties of nanocomposites were studied by thermo‐gravimetric analysis. It was found that, the thermal property of PAN was substantially enhanced due to strong interfacial adhesion of Mg‐Al‐LDH with PAN matrix. Further, it was noticed that the thermal stability of PAN/LDH nanocomposites were increased with increasing concentration of LDH. POLYM. COMPOS., 36:2140–2144, 2015. © 2014 Society of Plastics Engineer     

Investigation of microstructure of 4‐vinyl pyridine–methacylonitrile copolymers by NMR spectroscopy

4‐Vinyl pyridine–methacrylonitrile (V/M) copolymers of different composition were prepared by bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition was determined from quantitative ¹³C{¹H}‐NMR spectra. The reactivity ratios for V/M copolymer obtained from a linear Kelen‐Tudos method (KT) and nonlinear error‐in‐variables method (EVM) are r_V = 0.79 ± 0.12, r_M = 0.38 ± 0.09 and r_V = 0.79 ± 0.13, r_M = 0.38 ± 0.07, respectively. The complete spectral assignment in term of compositional and configurational sequences of these copolymers were done with the help of distortionless enhancement by polarization transfer (DEPT), two‐dimensional heteronuclear single quantum coherence spectroscopy (HSQC). Total correlated spectroscopy (TOCSY) experiment was used to assign the various three‐bond ¹H‐¹H couplings in the V/M copolymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3232–3238, 2003     

A Novel Highly Sensitive Humidity Sensor Based on ZnO/SBA‐15 Hybrid Nanocomposite

This work deals with the study of hydrothermally synthesized zinc oxide (ZnO) loaded mesoporous SBA‐15 hybrid nanocomposite for relative humidity sensing (RH) at room temperature. The sensor exhibits an excellent ~5 orders impedance change along with excellent linearity, quick response time (17 s), rapid recovery time (18 s), negligible hysteresis (1.2%), good repeatability, and stability (1.8%) in 11%–98% RH range. In addition, complex impedance spectra of the sensor at different RHs were analyzed to understand the humidity sensing mechanism. Our study can open a new way for realizing ZnO/SBA‐15 hybrid nanocomposite for fabrication of high‐performance RH sensors.     

Development of pellets of nifedipine using HPMC K15 M and κ-carrageenan as mucoadhesive sustained delivery system and in vitro evaluation

Polymeric mucoadhesive pellets of nifedipine were designed using computer software and they were prepared by extrusion-spheronization using HPMC K15M and κ-carrageenan with microcrystalline cellulose. A randomized rotatable two factor central composite design was applied for assessment of influence of two independent variables such as concentration of κ-carrageenan and HPMC K15M on dependent variables. Pellets were characterized by FTIR, DSC, SEM, flow properties, particle size, abrasion resistance, sphericity, drug content, percent production yield, in vitro drug release, ex vivo mucoadhesion, stability studies and similarity factor. The optimized formulation was selected based on criteria of sphericity nearest to 1.0 with maximum cumulative drug release percentage. Formulation NF6 exhibited sufficient porous spheres, free flowing and smooth surface mucoadhesion of 91.34 % and drug content 98.22 ± 0.37 %. Kinetic modeling revealed that the formulation followed the Higuchi model and showed the Quassi-Fickian drug release mechanism. The similarity factor, F2 value, was found to be 74 ± 6 and there was no significant change in drug content and ex vivo mucoadhesion after 90 days at 40 ± 2 °C, and 75 ± 5 % RH clearly indicated the optimized batch NF6 was stable. Thus, it can be concluded that use of κ-carrageenan, microcrystalline cellulose and HPMC K15M at the 20:35:10 w/w ratio could provide an effective carrier for enhancement of sphericity and sustained release of matrix pellets.     

Experimental Investigation on the Performance of a Solar Still Using SiO2 Nanoparticles /Jatropha curcas L

Silicon - Now, enticing systematic civic since everywhere the world is used in green synthesis and benefit of the simple is eco-friendly with an emergent method of producing nanoparticles (NPs)....     

Densities and excess molar volumes of mixtures containing diesel,biodiesel and alkanols at temperatures from 288.15 to 313.15 K

The present work is focusing on the synthesization and physico-chemical properties of Jatropha curcas biodiesel with diesel and alcohols.The densities of binary diesel (2)+1-alkanols (C_3 or C_4)(3) and ternary Jatropha curcas biodiesel (1)+diesel (2)+1-alkanols (C_3or C_4)(3) blends have been reported over full range of composition at temperatures within range 288.15 to 313.15 K.Also densities of Jatropha curcas biodiesel (1)+diesel or 1-alkanols (C_3 or C_4)(2) blends have been measured at 313.15 K.Excess molar volumes,V~E,V~E_(123)of binary and ternary blends were calculated from the measured data and the derived properties were correlated to composition using Redlich–Kister equation.A reasonable agreement was found between the measured and estimated values.Further,densities and excess molar volumes data were reasoned to discuss molecular interactions taking into consideration effect of composition and temperature.     

Effects of nano size mischmetal and its oxide on improving the hydrogen sorption behaviour of MgH2

This paper reports the catalytic effects of mischmetal (Mm) and mischmetal oxide (Mm-oxide) on improving the dehydrogenation and rehydrogenation behaviour of magnesium hydride (MgH₂). It has been found that 5 wt.% is the optimum catalyst (Mm/Mm-oxide) concentration for MgH₂. The Mm and Mm-oxide catalyzed MgH₂ exhibits hydrogen desorption at significantly lower temperature and also fast rehydrogenation kinetics compared to ball-milled MgH₂ under identical conditions of temperature and pressure. The onset desorption temperature for MgH₂ catalyzed with Mm and Mm-oxide are 323 °C and 305 °C, respectively. Whereas the onset desorption temperature for the ball-milled MgH₂ is 381 °C. Thus, there is a lowering of onset desorption temperature by 58 °C for Mm and by 76 °C for Mm-oxide. The dehydrogenation activation energy of Mm-oxide catalyzed MgH₂ is 66 kJ/mol. It is 35 kJ/mol lower than ball-milled MgH₂. Additionally, the Mm-oxide catalyzed dehydrogenated Mg exhibits faster rehydrogenation kinetics. It has been noticed that in the first 10 min, the Mm-oxide catalyzed Mg (dehydrogenated MgH₂) has absorbed up to 4.75 wt.% H₂ at 315 °C under 15 atmosphere hydrogen pressure. The activation energy determined for the rehydrogenation of Mm-oxide catalyzed Mg is ∼62 kJ/mol, whereas that for the ball-milled Mg alone is ∼91 kJ/mol. Thus, there is a decrease in absorption activation energy by ∼29 kJ/mol for the Mm-oxide catalyzed Mg. In addition, Mm-oxide is the native mixture of CeO₂ and La₂O₃ which makes the duo a better catalyst than CeO₂, which is known to be an effective catalyst for MgH₂. This takes place due to the synergistic effect of CeO₂ and La₂O₃. It can thus be said that Mm-oxide is an effective catalyst for improving the hydrogen sorption behaviour of MgH₂.