The special behaviour of nanowires with respect to electrical conductivity makes them suitable for sensing application. In this paper, we present a copper-ferrous (CuFe) nanowires based sensor for detection of chemicals. CuFe nanowires were synthesized by template-assisted electrochemical method. By optimizing the deposition parameters, continuous nanowires on a copper substrate were synthesized. The morphological and structural studies of the synthesized CuFe nanowires were carried out using scanning electron microscope (SEM) and X-ray diffraction (XRD). Substrates containing CuFe nanowires were moulded to form a capacitor. Different chemicals were used as dielectric in the capacitor which showed that the capacitance was a nonlinear function of the dielectric constant of fluid unlike the linear relation shown by conventional capacitors. This unique property of the nanowires based capacitors may be utilized for developing fluid sensors with improved sensitivity. 相似文献
Resistant starch in unripe banana offers a possibility to alter the glycemic properties in convenience foods, such as pasta. In this study, pasta formulations were tried by replacing 30% semolina with varying proportions of green banana flour (GBF) and banana-modified starch (MS). The effect of substitution on physicochemical and functional properties, including in-vitro starch digestibility, antioxidant property and consumer acceptability, was evaluated. Among the composite flours, MS recorded higher swelling power and water holding capacity. The replacement of semolina with GBF resulted in higher resistant starch, 4–5 times enhanced indigestible fraction, phenols, flavonoids and antioxidant activity in pasta. Pronounced increment was also observed in potassium, calcium and magnesium content in blended pasta. Optimal cooking time was reduced with the addition of GBF, whereas it was enhanced with MS. GBF and MS in the blends, decreased the hydrolysis rate (up to 24%) and glycemic index (up to 17%) of pasta. However, the addition of MS beyond 10% negatively influenced springiness and chewiness. Microstructural studies explained the positive structural changes with the addition of GBF and MS. Sensory attributes disclosed that the addition of 25% GBF and 5% MS is a desirable proportion for pasta with a functional characteristics. 相似文献
The Cr:Fe ratio (chromium-to-iron mass ratio) of chromite affects the production of chrome-based ferroalloys. Although the lit-erature contains numerous reports related to the magnetic separation of di... 相似文献
Journal of Materials Science: Materials in Electronics - Gum kondagogu (GK), a natural biopolymer was successfully employed in the synthesis of trimetallic (AgAuPd) nanocomposites and characterized... 相似文献
Quenching and partitioning (Q&P) and a novel combined process of hot straining (HS) and Q&P (HSQ&P) treatments have been applied to a TRIP-assisted steel in a Gleeble®3S50 thermomechanical simulator. The heat treatments involved intercritical annealing at 800 °C and a two-step Q&P heat treatment with a partitioning time of 100 seconds at 400 °C. The “optimum” quench temperature of 318 °C was selected according to the constrained carbon equilibrium (CCE) criterion. The effects of high-temperature deformation (isothermal and non-isothermal) on the carbon enrichment of austenite, carbide formation, and the strain-induced transformation to ferrite (SIT) mechanism were investigated. Carbon partitioning from supersaturated martensite into austenite and carbide precipitation were confirmed by means of atom probe tomography (APT) and scanning transmission electron microscopy (STEM). Austenite carbon enrichment was clearly observed in all specimens, and in the HSQ&P samples, it was significantly greater than in Q&P, suggesting an additional carbon partitioning to austenite from ferrite formed by the deformation-induced austenite-to-ferrite transformation (DIFT) phenomenon. By APT, the carbon accumulation at austenite/martensite interfaces was observed, with higher values for HSQ&P deformed isothermally (≈ 11 at. pct), when compared with non-isothermal HSQ&P (≈ 9.45 at. pct) and Q&P (≈ 7.6 at. pct). Moreover, a local Mn enrichment was observed in a ferrite/austenite interface, indicating ferrite growth under local equilibrium with negligible partitioning (LENP).
Non-grain oriented electrical steel, with minor in-grain orientation gradients, was subjected to interrupted tensile deformations and concurrent microtexture, magnetic property and residual stress measurements. After the upper yield point, clear signatures of mechanical stress relief were observed. Changes in orientation gradients led to annihilation of low-angle (1 to 3 deg) boundaries. Prior deformation compressive residual stresses became tensile and magnetic properties improved. Beyond an optimum true strain of 0.01, this boundary annihilation ceased, compressive stresses were generated, and magnetic properties degraded. 相似文献
Performance of thermal interface materials (TIMs) used between a microelectronic device and its associated heat spreader is largely dependent on the bulk thermal conductivity of the TIM, but the bond-line thickness (BLT) of the applied material as well as the interfacial contact resistances are also significant contributors to overall performance. Hierarchically Nested Channels (HNCs), created by modifying the surface topology of the chip or the heatsink with hierarchical arrangements of microchannels in order to improve flow, have been proposed to reduce both the required squeezing force and the final BLT at the interfaces. In the present work, a topological optimization framework that enables the design of channel arrangements is developed. The framework is based on a resistance network approximation to Newtonian squeeze flow. The approximation, validated against finite element (FE) solutions, allows efficient, design-oriented solutions for squeeze flow in complex geometries. A comprehensive design sensitivity analysis exploiting the resistance network approximation is also developed and implemented. The resistance approximation and the sensitivity analysis is used to build an automated optimal channel design framework. A Pareto optimal problem formulation for the design of channels is posed and the optimal solution is demonstrated using the framework. 相似文献
This study addresses the problem of identifying families of parts having a similar sequence of operations. This is a prerequisite for the implementation of cellular manufacturing, group technology, just-in-time manufacturing systems, and for streamlining material flows in general. A pattern recognition approach based on artificial neural networks is proposed, and it is shown that the Fuzzy ART neural network can be effectively utilized for this application. First, a representation scheme for operation sequences is developed, followed by an illustrative example. A more comprehensive experimental verification, based on the mixture-model approach is then performed to evaluate its performance. The experimental factors include size of the part-machine matrix, proportion of voids, proportion of exceptional elements, and vigilance threshold. It is shown that this neural network is effective in identifying good clustering solutions, consistently and with relatively fast execution times. 相似文献