Long-Term Dynamic Modeling Approach to Quantifying Attached Algal Growth and Associated Impacts on Dissolved Oxygen in the Lower Truckee River, Nevada

Nutrient loads enter the lower Truckee River of western Nevada, affecting the growth of attached algae (periphyton) which causes depressed nighttime dissolved oxygen (DO) levels. The lower Truckee River is home to the endangered cui-ui and threatened Lahontan cut-throat trout, with DO standards being established to in part protect these species. Hydrodynamics, nutrient concentrations, periphyton biomass, and DO data spanning August 2000–December 2001 were used to calibrate and verify a modified version of the Water Quality Analysis Simulation Program Version 5 (WASP5). Under typical loading conditions the periphyton community is nitrogen limited, however nitrogen loading from an upstream wastewater treatment facility increased greatly during the analysis period due to approved site construction activities (discharge permit excursion) causing the periphyton community to temporarily become phosphorus limited. The developed modeling approach, with limited calibration, was able to accurately track dynamic system responses. Removing the impact of the noted discharge permit excursion resulted in a minimum computed DO value of 4.13?mg/L, occurring at the downstream end of the modeling domain on August 8, 2001. Additionally removing the impact of all nutrient loads from area agriculture resulted in a predicted minimum DO value of 4.54?mg/L, while also shifting its location significantly upstream and its timing to April 26, 2001. Meeting all prescribed DO standards required establishing a minimum in-stream flow value of 1.81?m3/s (64.0?ft3/s) downstream of Derby Dam.     

Lesser in vitro anaerobic cecal isoflavone disappearance was associated with greater apparent absorption of daidzein and genistein in Golden Syrian hamsters

Our hypothesis in this study was that in vitro disappearance of isoflavones from fecal or cecal contents of Golden Syrian hamsters paralleled the apparent absorption of these compounds, comparable with previous findings from in vitro human fecal incubations. Two studies were conducted to test this idea: one on in vitro fecal (study 1, n = 20/sex) and the other on in vitro cecal contents (study 2, n = 10/sex) ability to degrade isoflavones. According to HPLC analysis, urinary isoflavone excretion was significantly less by 2-4 fold in males compared with females in both studies. Fecal isoflavone excretion was not significantly different between sexes or isoflavones (study 1) and was <0.5% of ingested dose. In vitro anaerobic fecal isoflavone degradation rate constants from study 1 were minimal with no significant correlation between urinary and fecal isoflavone excretion. However, in vitro anaerobic cecal isoflavone degradation rate constants (study 2) were greater and significantly correlated with urinary excretion of daidzein (R = 0.90; p = 0.01) and genistein (R = 0.93; p = 0.004), but not glycitein (R = 0.50; p = 0.3). Both male and female hamsters showed a pattern of urinary isoflavone excretion similar to that found in humans (daidzein > genistein). Hamster in vitro cecal isoflavone degradation rate constants seemed to be analogous to human in vitro fecal isoflavone degradation rate constants for genistein and daidzein. The sex difference in isoflavone excretion in hamsters and the instability in glycitein excretion across studies coupled with the paucity of human data on this isoflavone deserve further investigation.     

Investigation into etching mechanism of polyethylene terephthalate (PET) films treated in helium and oxygenated‐helium atmospheric plasmas

This research makes an investigation into the etching mechanism of atmospheric plasma conditions on the surface of polyethylene terephthalate (PET) films. Two types of untreated PET films (S/200 and S/500) were exposed to plasma for 0 to 5.0 min in 30‐s increments. The first set of each film type was treated in helium plasma, while the second was treated in oxygenated‐helium plasma. Differential Scanning Calorimetry (DSC) was used to characterize pre‐ and post‐exposure films. Weight changes and the degree of solubility were also determined. Based on peak area results, the percent crystallinity of PET S/200 increased by an average of 4.57% (helium treated) and 13.56% (oxygenated‐helium treated), while the S/500 showed only a small increase. There was no significant change in the melting or crystallization temperatures of either film type, indicating a decrease in amorphous content versus an increase in crystalline material. Weight loss analysis supports this theory. Solubility testing revealed a continual decrease in swelling as exposure time was increased. A model was developed to predict the change in the degree of solubility for polyphase surfaces considering the etching rate per phase. The model was applied to PET with good correlation between the model and experimental data. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2383–2389, 2004     

Production of renewable fuels by blending bio-oil with alcohols and upgrading under supercritical conditions

The work studied a non-catalytic upgrading of fast pyrolysis bio-oil by blending under supercritical conditions using methanol, ethanol and isopropanol as solvent and hydrogen donor. Characterisation of the bio-oil and the upgraded bio-oils was carried out including moisture content, elemental content, pH, heating value, gas chromatography-mass spectrometry (GCMS), Fourier transform infrared radiation, ¹³C nuclear magnetic resonance spectroscopy, and thermogravimetric analysis to evaluate the effects of blending and supercritical reactions. The GCMS analysis indicated that the supercritical methanol reaction removed the acids in the bio-oil consequently the pH increased from 2.39 in the crude bio-oil to 4.04 after the supercritical methanol reaction. The ester contents increased by 87.49% after the supercritical methanol reaction indicating ester formation could be the major deacidification mechanism for reducing the acidity of the bio-oil and improving its pH value. Simply blending crude bio-oil with isopropanol was effective in increasing the C and H content, reducing the O content and increasing the heating value to 27.55 from 17.51 MJ·kg^‒1 in the crude bio-oil. After the supercritical isopropanol reaction, the heating value of the liquid product slightly further increased to 28.85 MJ·kg^‒1.     

An investigation into transition metal ion binding properties of silk fibers and particles using radioisotopes

Silk is a structural protein fiber that is stable over a wide pH range making it attractive for use in medical and environmental applications. Variation in amino acid composition has the potential for selective binding for ions under varying conditions. Here we report on the metal ion separation potential of Mulberry and Eri silk fibers and powders over a range of pH. Highly sensitive radiotracer probes, ⁶⁴Cu²⁺, ¹⁰⁹Cd²⁺, and ⁵⁷Co²⁺ were used to study the absorption of their respective stable metal ions Cu²⁺, Cd²⁺, and Co²⁺ into and from the silk sorbents. The total amount of each metal ion absorbed and time taken to reach equilibrium occurred in the following order: Cu²⁺ > Cd²⁺ > Co²⁺. In all cases the silk powders absorbed metal ions faster than their respective silk fibers. Intensive degumming of the fibers and powders significantly reduced the time to absorb respective metal ions and the time to reach equilibrium was reduced from hours to 5–15 min at pH 8. Once bound, 45–100% of the metal ions were released from the sorbents after exposure to pH 3 buffer for 30 min. The transition metal ion loading capacity for the silk sorbents was considerably higher than that found for commercial ion exchange resins (AG MP‐50 and AG 50W‐X2) under similar conditions. Interestingly, total Cu²⁺ bound was found to be higher than theoretically predicted values based on known specific Cu²⁺ binding sites (AHGGYSGY), suggesting that additional (new) sites for transition metal ion binding sites are present in silk fibers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Fish oil sensory properties can be predicted using key oxidative volatiles

The high level of PUFA in fish oil, primarily eicosapentaenoic acid (EPA) and DHA result in rapid oxidation of the oil. Current methods used to assess oxidation have little correlation with sensory properties of fish oils. Here we describe an alternative method using solid phase microextraction (SPME) combined with GC‐MS to monitor volatile oxidation products. Stepwise discriminant function analysis (DFA) was used to classify oils characterized as acceptable or unacceptable based on sensory analysis; a cross‐validated success rate of 100% was achieved with the function. The classification function was also successfully validated with tasted samples that were not used to create the method. A total of 14 variables, primarily aldehydes and ketones, were identified as significant discriminators in the classification function. This method will be useful as a quality control method for fish oil manufacturers. Practical applications: This paper describes an analytical method that can be used by fish oil manufacturers for quality control purposes. Solid phase microextraction and GC‐MS were used to monitor volatile oxidation products in fish oil. These data, combined with results of analyses by a sensory panel, were used to create a function that classified fish oil samples as acceptable or unacceptable. The volatile oxidation products used to in the function were primarily aldehydes and ketones. This method can be used by fish oil manufacturers as an alternative to expensive sensory panels.     

The effect of fly ash on fluid dynamics of CO2 scrubber in coal-fired power plant

Uncaptured fly ash and/or suspended solids from wet flue gas desulfurization (WFGD) scrubbing solutions are one of several factors that will influence the performance and robustness of carbon dioxide capture systems in coal-fired power plants which will be installed prior to the exhaust stack. In this study, a 100 mm ID packed column scrubber was tested with different concentrations of ash in various chemical solutions to evaluate the influence of solids on the fluid dynamics of the packing material. Data reported here are collected from three solutions including water, 30 wt% MEA (monoethanolamine), and 20 wt% potassium carbonate. The packing selected for this study was a 16 mm polypropylene pall rings. Compressed air was used to simulate flue gas at near ambient temperature and pressure.     

Gender and dietary fat affect α-tocopherol status in F344/N rats

For four weeks, groups of eight male and eight female F344/N rats were fed diets containing 15.5, 20, 30 or 40% of energy (en%) as fat. The fat was composed of corn oil and beef tallow with 9 en% from linoleate in all diets. Females had greater mean hepatic α-tocopherol levels, whereas males had greater plasma α-tocopherol and cholesterol concentrations. In males, the plasma ratio of α-tocopherol/cholesterol was significantly greater than in females (P<0.05). Plasma α-tocopherol increased with increasing en% fat (r=0.51,P<0.001) in both sexes, but dietary fat did not alter hepatic α-tocopherol levels. These results suggest that plasma α-tocopherol may serve as a biomarker of total dietary fat intake and that in F344/N rats gender differences affect α-tocopherol and cholesterol status.     

Pillared clay and zirconia-based monolithic catalysts for selective catalytic reduction of nitric oxide by methane

New monolithic catalysts based on zirconia and pillared clays (PILC) have been studied for NO_x removal by CH₄ in the presence of oxygen. A comparative study of the influence of ZrO₂ from various commercial sources for the system Pd–ZrO₂ and the effect of the noble metal chosen for the system NM–PILC was carried out, trying to correlate the catalytic activity with the physico-chemical properties of these catalysts. The obtained results indicate that structure and surface acidity of the support plays an important role on the selectivity to NO_x reduction, although properties such as the surface area or pore volume could also determine the overall activity of the monolithic catalysts.