Pore‐free mold‐pattern‐transfer method for barrier ribs of HD PDPs

Abstract— Among various barrier‐rib manufacturing processes, the mold‐pattern‐transfer method has potential to reduce processing cost as well as the manufacture of high‐resolution pixels. In this study, the effects of major processing variables of the mold‐pattern‐transfer process on the formation of air‐trapped pores within barrier ribs were examined. The results indicated that with an optimum combination of the processing variables, barrier ribs without trapped defects can be produced, demonstrating the possibility of reducing the number of processing steps and costs of barrier ribs.     

Parasitic Bipolar Junction Transistors in a Floating-Gate MOSFET for Fluorescence Detection

In this letter, we examined whether the parasitic bipolar junction transistors (BJTs) in the MOSFET fabricated by the standard CMOS process can play a role as a fluorescence detector. To suppress the action of two vertical parasitic BJTs, the gate and n-well were tied in the parasitic BJTs, and the body node was connected to the drain. The proposed device was compared with the inherent and the parasitic diodes in the MOSFET. It had 100 times higher photocurrents than the diodes in the MOSFET. In addition, it was applied for the detection of the fluorescent signal, and could detect near 10 nM of Alexa 546. Therefore, CMOS-process-compatible parasitic BJTs can be used as a photodetector in an integrated fluorescence detector.     

A novel bidirectional CMOS transceiver for chip-to-chip optical interconnects

A novel bidirectional complementary metal-oxide-semiconductor (CMOS) transceiver for chip-to-chip optical interconnects operating at 2.5 Gb/s is proposed, which shares the common block of a receiver and a transmitter on a single chip. The share of the common block of two circuits makes it possible to save 55% or 20% of power dissipation, depending on the operating mode. The chip in 0.18-/spl mu/m CMOS technology occupies an area of 0.82/spl times/0.82 mm/sup 2/, 70% of the total area of a typical unshared transceiver chip. The transmitting and receiving modes of operation show -3-dB bandwidths of 2.2 and 2.4 GHz and electrical isolations of -28 and -40 dB, respectively.     

Drying of persimmons (Diospyros kaki L.) and the following changes in the studied bioactive compounds and the total radical scavenging activities

Fresh persimmons were subjected to two different processes: sun-drying during 1 month and dehydration at 60 °C during 12 h. To assess the effect of this process on nutritional and health-related properties of persimmons dietary fibers, minerals, trace elements, polyphenols and the total radical scavenging activities (TRSAs) were determined before and after processing. It was found that the contents of dietary fibers, minerals and trace elements in fresh and dried persimmons fruits were comparable. Total polyphenols in fresh persimmons was higher than in dried fruits (1.3 vs. 0.9 and 0.8 mg/100 g FW, respectively) and percentage of inhibition was higher than in dried fruits (70% vs. 59% and 55% and 58% vs. 53% and 46% for 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2′-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) [ABTS] radicals, respectively (P>0.05 in all cases). In conclusion: (1) the differences in the contents of dietary fibers, minerals and trace elements in fresh and dried persimmons are not significant; (2) the contents of polyphenols and the level of the TRSA are higher in fresh persimmons than in dried fruits; however, both variables are also high in dried persimmons; (3) when fresh fruits are not available, proper dried persimmons could be used as a valuable substitute.     

Feature Reduction via Generalized Uncorrelated Linear Discriminant Analysis

High-dimensional data appear in many applications of data mining, machine learning, and bioinformatics. Feature reduction is commonly applied as a preprocessing step to overcome the curse of dimensionality. Uncorrelated Linear Discriminant Analysis (ULDA) was recently proposed for feature reduction. The extracted features via ULDA were shown to be statistically uncorrelated, which is desirable for many applications. In this paper, an algorithm called ULDA/QR is proposed to simplify the previous implementation of ULDA. Then, the ULDA/GSVD algorithm is proposed, based on a novel optimization criterion, to address the singularity problem which occurs in undersampled problems, where the data dimension is larger than the sample size. The criterion used is the regularized version of the one in ULDA/QR. Surprisingly, our theoretical result shows that the solution to ULDA/GSVD is independent of the value of the regularization parameter. Experimental results on various types of data sets are reported to show the effectiveness of the proposed algorithm and to compare it with other commonly used feature reduction algorithms.     

Improvement of device performances by thin interlayer in conjugated polymers/methanofullerene plastic solar cell

Recent studies have reported that a thin interlayer between poly(3, 4-ethylene dioxythiophene)-poly(styrene sulfonic acid) (PEDOT: PSS) and an emissive polymer layer leads to a large increase in the performances of polymer light-emitting diodes (PLEDs) by preventing significant quenching of the radiative excitons at the PEDOT: PSS interface; therefore, acting as an efficient exciton-blocking layer. Using the similar idea, a thin interlayer was fabricated between PEDOT: PSS and the active layer of conjugated polymers/methanofullerene composites in a plastic solar cell. The interlayer consisted of a poly(fluorene)-based hole transporter spin-coated directly on top of the PEDOT: PSS layer. The devices with the interlayer exhibited a higher efficiency than in those without the interlayer.     

Central NO is involved in the antinociceptive action of intracisternal antidepressants in freely moving rats

The present study was performed to examine the central effects of antidepressants on nociceptive jaw opening reflex after intracisternal injection. we also investigated the mechanisms of central antinociceptive action of intracisternal antidepressants. We recorded the jaw opening reflex in freely moving rats and chose to administer antidepressants intracisternally in order to eliminate the effects of anesthetic agents on the pain assessment and evaluate the importance of the spinal site of action of antidepressants. After intracisternal injection of 15 microg imipramine, digastric electromyogram (dEMG) was decreased to 76+/-6% of the control. Intracisternal administration of 30 microg desipramine, nortriptyline or imipramine suppressed dEMG remarkably to 48+/-2, 27+/-8, or 25+/-5% of the control, respectively. The suppression of dEMG was maintained for 50 min. L-NG-Nitroarginine methyl ester (NAME) blocked the suppression of dEMG from 32+/-2 to 81+/-5% of the control. These results indicate that antidepressants produce antinociception through central mechanisms in the orofacial area. The central NO pathway seems to be involved in the antinociception of intracisternal antidepressants at supraspinal sites.     

Allelotype analysis of uterine leiomyoma: localization of a potential tumor suppressor gene to a 4-cM region of chromosome 7q

The degree and nature of patient involvement in consultations with health professionals influences problem and needs recognition and management, and public accountability. This paper suggests a framework for understanding the scope for patient involvement in such consultations. Patients are defined as co-producers of formal health services, whose potential for involvement in consultations depends on their personal rights, responsibilities and preferences. Patients' rights in consultations are poorly defined and, in the National Health Service (NHS), not legally enforceable. The responsibilities of patients are also undefined. I suggest that these are not to deny, of their own volition, the rights of others, which in consultations necessitate mutuality of involvement through information-exchange and shared decision-making. Preferences should be met insofar as they do not militate against responsibilities and rights.     

Vertical bridgman techniques to homogenize zinc composition of CdZnTe substrates

In order to improve the Zn homogeneity along the axial direction of CdZnTe boule, we have employed a modified Bridgman technique using a (Cd, Zn) alloy source in communication with the melt, whose temperature has been gradually changed from 800 to 840°C during growth. Electron probe microanalysis (EPMA) measurements of Zn composition in the boule shows an excellent homogeneity of Zn along the axis of the CdZnTe boule compared with results in a boule grown by using a fixed source temperature. We have performed a numerical simulation to obtain the approximate temperatures of additional heating and cooling needed to improve the radial Zn homogeneity. CdZnTe boule has been grown by seeded vertical Bridgman furnace with two zones of heater and cooler. Ultraviolet/visible spectroscopic measurements of Zn composition over the length of the boule indicate that the radial distribution of Zn composition is very homogeneous in the body region of the boule, where the radial variation of Zn composition is ±0.0005.     

Covering a string

We consider the problem of finding the repetitive structures of a given stringx. The periodu of the stringx grasps the repetitiveness ofx, sincex is a prefix of a string constructed by concatenations ofu. We generalize the concept of repetitiveness as follows: A stringw covers a stringx if there is a superstring ofx which is constructed by concatenations and superpositions ofw. A substringw ofx is called aseed ofx ifw coversx. We present anO(n logn)-time algorithm for finding all the seeds of a given string of lengthn.Partially supported by SERC Grants GR/F 00898 and GR/J 17844, NATO Grant CRG 900293, ESPRIT BRA Grant 7131 for ALCOMII, and MRC Grant G 9115730.Partially supported by MRC Grant G 9115730 and S.N.U. Posco Research Fund 94-15-1112.