Three-dimensional measurement of ice crystals in frozen beef with a micro-slicer image processing system

A novel technique has been developed for measuring the three-dimensional (3-D) structure and distribution of ice crystals formed in frozen beef by using a micro-slicer image processing system (MSIPS). The system has functions to reconstruct the 3-D image based on the image data of exposed cross-sections obtained by multi-slicing of a frozen sample with the minimum thickness of 1 μm and to display the internal structure as well as an arbitrary cross-section of the sample choosing observation angles. The size and distribution of ice crystals can be determined from the 2-D quantitative information, such as the periphery and area of the crystals. The effects of freezing conditions on the morphology and distribution of the ice crystals were demonstrated quantitatively from the observations of raw beef stained by fluorescent indicator. For the samples frozen at −15 °C, the network structure of ice crystals were observed mainly at intercellular space, having approximately 100 μm in cross-sectional size, while that prepared at −120 °C showed the spherical crystals of 10–20 μm in diameter within the cells. The 3-D image of the sample demonstrated that the growth of ice columns was restricted by the intrinsic structure of muscle fibers. The proposed method provided a new tool to investigate the effects of freezing conditions on the size, morphology and distribution of ice crystals.     

ARSlice: Head-Mounted Display Augmented with Dynamic Tracking and Projection

Computed tomography (CT) generates cross-sectional images of the body. Visualizing CT images has been a challenging problem. The emergence of the augmented and virtual reality technology has provided promising solutions. However, existing solutions suffer from tethered display or wireless transmission latency. In this paper, we present ARSlice, a proof-of-concept prototype that can visualize CT images in an untethered manner without wireless transmission latency. Our ARSlice prototype consists of two parts, the user end and the projector end. By employing dynamic tracking and projection, the projector end can track the user-end equipment and project CT images onto it in real time. The user-end equipment is responsible for displaying these CT images into the 3D space. Its main feature is that the user-end equipment is a pure optical device with light weight, low cost, and no energy consumption. Our experiments demonstrate that our ARSlice prototype provides part of six degrees of freedom for the user, and a high frame rate. By interactively visualizing CT images into the 3D space, our ARSlice prototype can help untrained users better understand that CT images are slices of a body.     

Genetic Basis Underlying Structural Shift of Monoterpenoid Pheromones in Mealybugs

Journal of Chemical Ecology - Insect sex pheromones are examples of semiochemicals that trigger the most conspicuous biological activities, and they have attracted the interest of chemical...     

Effect of Vertical Misfit on Screw Joint Stability of Implant-Supported Crowns

The passive fit between prosthesis and implant is a relevant factor for screw joint stability and treatment success. The aim of this study was to evaluate the influence of vertical misfit in abutment-implant interface on preload maintenance of retention screw of implant-supported crowns. The crowns were fabricated with different abutments and veneering materials and divided into 5 groups (n = 12): Gold UCLA abutments cast in gold alloy veneered with ceramic (Group I) and resin (Group II), UCLA abutments cast in titanium veneered with ceramic (Group III) and resin (Group IV), and zirconia abutments with ceramic veneering (Group V). The crowns were attached to implants by gold retention screws with 35-N cm insertion torque. Specimens were submitted to mechanical cycling up to 10⁶ cycles. Measurements of detorque and vertical misfit in abutment-implant interface were performed before and after mechanical cycling. ANOVA revealed statistically significant difference (P < 0.05) among groups for vertical misfit measured before and after mechanical cycling. The abutments cast in titanium exhibited the highest misfit values. Pearson correlation test did not demonstrate significant correlation (P > 0.05) between vertical misfit and detorque value. It was concluded that vertical misfit did not influence torque maintenance and the abutments cast in titanium exhibited the highest misfit values.     

Relationship among collagen amount, distribution and architecture in the M. longissimus thoracis and M. pectoralis profundus from pigs

The relative distribution of types I and III collagens and collagen fibre architecture in the perimysium and endomysium were compared to the longissimus thoracis (LT) and pectoralis profundus (PP) muscles in pigs. The LT muscle was composed of type I myofibres 16.8%, IIA 12.9% and IIB 70.2%, and the PP muscle was 25.4, 23.1 and 51.5%, respectively. The total collagen amount differed significantly between the LT (2.66 mg/g) and PP (4.13 mg/g) muscle (P<0.001). On image analysis of the immunohistochemical preparations for types I and III collagens, the percentage area of the perimysium to the total collagen area showed significant differences between the muscles, where perimysial type I collagen occupied 25.4% of the total area in the LT muscle and 45.7% in the PP and perimysial type III 37.6 and 54.5%, respectively (P<0.001). In scanning electron microscopic photographs of the macerated preparation, very thick collagen layers composed of several fibre bands were observed in the perimysia of the PP muscle and appeared differently from the thinner perimysia with a few bands in the LT. Similar architecture of endomysial collagen fibres were observed around every myofibre type in the PP muscle and also in the LT. The fine surface cover of reticular collagen fibres around an adipocyte was shown as a global cast. These results suggested that the total collagen amount of the PP muscle was related mainly to the well developed perimysia composed of several collagen bands, indicating tougher meat compared with the LT muscle.     

The effect of chemical reaction on the mixing flow between aqueous solutions of acetic acid and ammonia

The basic characteristics of the reacting mixing flow of two streams were investigated. The reaction between aqueous solutions of ammonia and acetic acid, which produces ammonium acetate, was investigated in terms of the effect on the fluid–fluid interface of the mixing flow relative to fluids that did not react. The reaction between these solutions was negligibly exothermic, and there were minimal differences in density. The velocity field in the reacting mixing flow was quantitatively measured using high-speed time-resolved particle image velocimetry (PIV) and the behavior of the mixing flow was qualitatively investigated using laser-induced fluorescence (LIF). The jet width, the velocity field, the kinetic energy and the turbulent intensities are qualitatively estimated and discussed. It was found that the chemical reaction resulted in the suppression of the mixing flow.     

Restoration of solid oxide fuel cell stacks after failure of partial cells

We investigated a solid oxide fuel cell stack that employs anode-supported planar cells in which two intermediate plates are installed every 10 cells to determine the influence of the separation and reconnection of the intermediate plates after high temperature operation. We showed that this separation and reconnection caused no significant degradation in stack performance. A 30-cell stack, which was constructed by removing two 10-cell sub-stacks from a 50-cell stack that had operated stably 1200 h, functioned well. The difference between the average voltages of the cells in the 50- and 30-cell stacks was less than 3% when the current density, fuel utilization, and oxygen utilization were 0.30 A cm⁻², 60%, and 15%, respectively. The 30-cell stack operated stably for about 1200 h with almost no degradation. These findings indicate that our stack can be restored after cells in the stack have broken down simply by removing the 10-cell sub-stacks that contain the broken cells and replacing them with undamaged 10-cell sub-stacks.     

Polymerization of ethylene and propylene initiated by milled alumina powder

Generation of free radicals (mechano-radicals) by the milling of alumina powder at 77 K was demonstrated by ESR. After milling of alumina in the presence of ethylene (simultaneous milling) at 77 K, polyethylene-propagating radicals instead of the alumina mechano-radicals were detected by ESR. Also the contact of ethylene with the milled alumina converted alumina mechano-radicals into polyethylene propagating radicals at a temperature above the melting point of ethylene. The products extracted by hot toluene from the simultaneous milling were identified by IR to be polyethylene, and their molecular weights were roughly 10,000. The residues after the extraction were bonded with the alumina. Polypropylene was also produced by a similar method of milling of alumina in the presence of propylene. The obtained polyproylene was atactic, and its molecular weight was about 400.