Role of Heavy Meromyosin in Heat‐Induced Gelation in Low Ionic Strength Solution Containing l‐Histidine

The gelation of myosin has a very important role in meat products. We have already shown that myosin in low ionic strength solution containing l ‐histidine forms a transparent gel after heating. To clarify the mechanism of this unique gelation, we investigated the changes in the nature of myosin subfragments during heating in solutions with low and high ionic strengths with and without l ‐histidine. The hydrophobicity of myosin and heavy meromyosin (HMM) in low ionic strength solution containing l ‐histidine was lower than in high ionic strength solution. The SH contents of myosin and HMM in low ionic strength solution containing l ‐histidine did not change during the heating process, whereas in high ionic strength solution they decreased slightly. The heat‐induced globular masses of HMM in low ionic strength solution containing l ‐histidine were smaller than those in high ionic strength solution. These findings suggested that the polymerization of HMM molecules by heating was suppressed in low ionic strength solution containing l ‐histidine, resulting in formation of the unique gel.     

Physicochemical characteristics of rapidly dried onion powder and its anti-atherogenic effect on rats fed high-fat diet

Rapidly dried onion (Allium cepa L. cv. Momiji No. 3) powder (OP) prepared from the outer layers (from second to fourth scale leaves from the surface) of onion bulbs was analysed for its quercetin and polyuronide contents, the effects of enzymatic treatment and the anti-atherogenic effect on rats fed a high-fat diet. Quercetin 4′-glucoside (50%), free quercetin (30%) and quercetin 3,4′-diglucoside (20%) were identified as quercetin derivatives, and boiling-water extraction was effective in extracting these compounds. OP contained 12.9% of polyuronides, the basic skeleton of pectin. Enzymatic degradation (cellulase and pectinase, 50 °C for 12 h, pH 6.0) of OP was effective in obtaining a slurry of smaller particle sizes. The free quercetin increased and the glucosides decreased with enzyme treatment. In Wistar rats fed an OP-added high-fat diet, the total cholesterol, HDL-cholesterol and triglyceride concentrations were not significantly different from the rats fed a high-fat diet without OP. However, the atherogenic index (AI) of Wistar rats fed an OP-added high-fat diet was lower (AI = 3.3) than rats fed the diet without OP (AI = 4.1). The incremental elastic modulus (IEM) of the aorta from rats fed the OP-added diet was also significantly lower than that of the rats fed the diet without OP. The AI and IEM values of the rats fed the OP-added diet were quite similar to the values of rats fed the diet without OP but were allowed spontaneous exercise. These results suggest that OP intake is effective for decreasing the risk of arteriosclerosis.     

Simple Method for Measuring the Peroxide Value in a Colored Lipid

We developed a simple method for quantification of the peroxide value (PV) in colored lipids on the basis of the reaction between triphenylphosphine (TPP) and oxidized oil to afford triphenylphosphineoxide (TPPO). Diphenylphosphineoxide (DPPO) was employed as internal standard. The formed TPPO was analyzed by high-pressure liquid chromatography–UV spectroscopy with absorption at 260 nm. The conditions that gave the highest correlative calibration curve between the peak area on the chromatogram and peroxide value were identified: the optimum TPP–oxidized oil mix ratio, reaction temperature, and reaction time were found to be 2:1, 40 °C, and 30 min, respectively. Linear calibration curves, passing through the origin, were obtained for PV versus TPPO and TPPO versus DPPO. The quantification limit for this method was 2.01 pmol hydroperoxyl group, which corresponds to a PV value of 0.2 meq/kg in a 10-mg oil sample. This method was used to measure the PV in colored fats and oils or lipids extracted from dark meat and processed food containing a coloring agent. Though the official method could not measure the PVs in the colored lipids, the method proposed here, which uses an inexpensive chemical reagent and machine, could. The developed method could play an important role for food quality control.     

Melatonin-Induced Postconditioning Suppresses NMDA Receptor through Opening of the Mitochondrial Permeability Transition Pore via Melatonin Receptor in Mouse Neurons

Mitochondrial membrane potential regulation through the mitochondrial permeability transition pore (mPTP) is reportedly involved in the ischemic postconditioning (PostC) phenomenon. Melatonin is an endogenous hormone that regulates circadian rhythms. Its neuroprotective effects via mitochondrial melatonin receptors (MTs) have recently attracted attention. However, details of the neuroprotective mechanisms associated with PostC have not been clarified. Using hippocampal CA1 pyramidal cells from C57BL mice, we studied the involvement of MTs and the mPTP in melatonin-induced PostC mechanisms similar to those of ischemic PostC. We measured changes in spontaneous excitatory postsynaptic currents (sEPSCs), intracellular calcium concentration, mitochondrial membrane potential, and N-methyl-D-aspartate receptor (NMDAR) currents after ischemic challenge, using the whole-cell patch-clamp technique. Melatonin significantly suppressed increases in sEPSCs and intracellular calcium concentrations. The NMDAR currents were significantly suppressed by melatonin and the MT agonist, ramelteon. However, this suppressive effect was abolished by the mPTP inhibitor, cyclosporine A, and the MT antagonist, luzindole. Furthermore, both melatonin and ramelteon potentiated depolarization of mitochondrial membrane potentials, and luzindole suppressed depolarization of mitochondrial membrane potentials. This study suggests that melatonin-induced PostC via MTs suppressed the NMDAR that was induced by partial depolarization of mitochondrial membrane potential by opening the mPTP, reducing excessive release of glutamate and inducing neuroprotection against ischemia-reperfusion injury.     

Sensitivity and Evaluation of Explosive Substances

Explosion sensitivity involves many complex factors. A theory for evaluating and a method for testing have to be established. We have proposed an explosion sensitivity theory for explosive substances and have also tested the evaluating method. The results of our research reveal a satisfactory mutual relation between both theoretical and experimental values.     

Mutations in exon 7 and 8 of p53 as poor prognostic factors in patients with non-small cell lung cancer

This study was performed to clarify the different effects of each mutant exon of p53 as indicators of a poor prognosis in patients with non-small cell lung cancer (NSCLC). Tumor tissues of 204 patients with NSCLC were analysed; 96 tumors were stage I, 22 stage II, and 86 stage III. DNA was extracted from frozen specimens and polymerase chain reaction-single strand conformation polymorphism (PCR-SSCP) and direct sequencing were performed to investigate mutations of p53 from exon 5 to exon 8. Seventy-five patients with NSCLC (36.8%) had mutations in p53 which included 72 cases of missense mutations and three cases of non-missense mutations. The overall survival rate of patients with mutant p53 adenocarcinomas was strikingly worse than that of patients whose tumors had wild-type p53 (35.7% vs 53.8%; P=0.041), but no significant difference in survival was found in the patients with NSCLC and squamous cell carcinoma. Mutations in exon 5 of p53 occurred in 33 cases (16.2%), mutation in exon 6 was detected in only one case (0.5%), mutations in exon 7 in 20 cases (9.8%), and mutations in exon 8 in 18 cases (8.8%). The overall survival rate of patients with mutations in exon 7 was worse than that of patients with wild-type p53 in NSCLCs and adenocarcinomas (42.9% vs 56.0%; P=0.025 and 33.3% vs 53.8%; P=0.048, respectively), whereas the overall survival of patients with mutations in exon 5 was almost the same as that of patients with wild-type p53. In addition, the overall survival rate of patients with mutations in exon 8 was strikingly worse than that of patients with wild-type p53 in NSCLCs, adenocarcinomas and squamous cell carcinomas (22.9% vs 56.0%; P<0.001, 19.0% vs 53.8%; P=0.004 and 33.3% vs 62.5%; P=0.042, respectively). Multivariate analysis with the Cox regression model of patients with NSCLC, adenocarcinoma and squamous cell carcinoma indicated that mutations in exon 8 were best correlated with the overall survival rate, followed by lymph node status (P<0.001, P=0.015 and P=0.006, respectively), and mutations in exon 7 of NSCLC were also revealed to have good correlation, followed by lymph node status and mutations in exon 8 (P=0.031). Mutation of p53 was a poor prognostic factor for adenocarcinoma as described previously. Moreover, mutations in exon 8 were more useful indicators of prognosis not only for adenocarcinoma but also for NSCLC. Worse overall survival of the patients with mutations in exon 8 of p53 was suggested to be associated with codon 273 mutations as well as mutations between codon 280 and 285 included into the H2 alpha helix corresponding to residues 278-286. These results suggested that abnormal conformation of H2 alpha helix might play an important role not only in the loss of normal function but also in the acquisition of tumorigenesis. Investigation of mutations in exon 8, especially codon 273 mutation and mutant H2 alpha helix was considered to be a clinically useful approach for determining the prognosis of patients with NSCLC.     

Effect of surface properties of silica nanoparticles on their cytotoxicity and cellular distribution in murine macrophages

In this study, complexes composed of poly-l-tyrosine (pLT) and single-walled carbon nanotubes (SWCNTs) were produced and the dispersibility of the pLT/SWCNT complexes in water by measuring the ζ potential of the complexes and the turbidity of the solution were investigated. It is found that the absolute value of the ζ potential of the pLT/SWCNT complexes is as high as that of SWCNTs modified with double-stranded DNA (dsDNA) and that the complexes remain stably dispersed in the water at least for two weeks. Thermogravimetry analysis (TGA) and visualization of the surface structures of pLT/SWCNT complexes using an atomic force microscope (AFM) were also carried out.     

Repeatable change in electrical resistance of Si surface by mechanical and electrical nanoprocessing

The properties of mechanically and electrically processed silicon surfaces were evaluated by atomic force microscopy (AFM). Silicon specimens were processed using an electrically conductive diamond tip with and without vibration. After the electrical processing, protuberances were generated and the electric current through the silicon surface decreased because of local anodic oxidation. Grooves were formed by mechanical processing without vibration, and the electric current increased. In contrast, mechanical processing with vibration caused the surface to protuberate and the electrical resistance increased similar to that observed for electrical processing. With sequential processing, the local oxide layer formed by electrical processing can be removed by mechanical processing using the same tip without vibration. Although the electrical resistance is decreased by the mechanical processing without vibration, additional electrical processing on the mechanically processed area further increases the electrical resistance of the surface.     

Toughening of cyanate ester resin by N‐phenylmaleimide–N‐(p‐hydroxy)phenyl‐maleimide–styrene terpolymers and their hybrid modifiers

N‐Phenylmaleimide–N‐(p‐hydroxy)phenylmaleimide–styrene terpolymer (HPMS), carrying reactive p‐hydroxyphenyl groups, was prepared and used to improve the toughness of cyanate ester resins. Hybrid modifiers composed of N‐phenylmaleimide–styrene copolymer (PMS) and HPMS were also examined for further improvement in toughness. Balanced properties of the modified resins were obtained by using the hybrid modifiers. The morphology of the modified resins depends on HPMS structure, molecular weight and content, and hybrid modifier compositions. The most effective modification of the cyanate ester resin was attained because of the co‐continuous phase structure of the modified resin. Inclusion of the modifier composed of 10 wt% PMS (M_w 136 000 g mol^?1) and 2.5 wt% HPMS (hydroxyphenyl unit 3 mol%, M_w 15 500 g mol^?1) led to 135% increase in the fracture toughness (K_IC) for the modified resin with a slight loss of flexural strength and retention of flexural modulus and glass transition temperature, compared with the values for the unmodified resin. Furthermore, the effect of the curing conditions on the mechanical and thermal properties of the modified resins was examined. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviour of the modified cyanate ester resin system. © 2001 Society of Chemical Industry