A method for dispersing dry nano-sized particles in a liquid using carrier particles

A method for dispersing dry particles in a liquid is described. The method involves coating large carrier particles with fine particles. When two types of particles having different sizes are mixed in dry conditions, the particles adhere to one another, and the large particles become coated with small particles. When the large core particles are coated with a mono-layer of small particles, further agglomeration is inhibited. Because the single small particles generated by the disruption adhere to the core particles, we presumed that, if the small particles that are adhered to large particles could be separated from the large particles by a sonication in a liquid, the dry fine particles could be dispersed in a liquid.The dispersion experiments conducted using spherical silica particles having a count median diameter D_p50 of 74 nm as small particles and spherical glass beads as large particles. In this situation, the large particles carry the small particles from a dry condition into a liquid. We refer to the large particles as carrier particles. The experiments revealed that the proposed dispersion procedure results in a superior product, compared to sonication only. The effect of carrier size on dispersion performance is also investigated. The findings indicate and an optimum carrier size exists. Observations of the carrier particle surfaces after dry mixing indicate that the optimum condition is the condition at which a mono-layer of Silica particles is formed.     

Expansion of linear range of Pound-Drever-Hall signal

We propose new solutions for expanding the linear signal range between the laser frequency deviation (or mirror position) and the voltage signal derived by the Pound-Drever-Hall (PDH) method for optical Fabry-Perot cavity resonance control. One solution is to perform not in-phase demodulation but near-Q-phase demodulation. Another solution is to take a suitable combination of signals demodulated by odd-harmonic modulation frequencies in the in phase. Although the PDH signal sensitivity will be diminished, the PDH signal linear range can be extended. From a practical standpoint, it is desirable that a sideband frequency for the PDH method is near the FP cavity resonance.     

Control of self organization in conjugated polymer fibers

We propose new strategy to facilitate the fabrication of conjugated polymer fiber with higher oriented structures, which focused on electrospinning of a blend solution of regioregular poly(3-hexylthiophene) (rr-P3HT) and poly(vinyl pyrrolidone) (PVP). SEM observation revealed that the blend system forms homogeneous composite nanofibers. This system exhibits the specific feature of strong interchain contribution of P3HT from UV-vis absorption, fluorescence spectroscopic, XRD, and photoelectron spectrometric (for HOMO levels) investigations. We also demonstrate the removal of the PVP component from the P3HT/PVP composite fibers through the selective extraction and such strong interchain stacking of pristine P3HT fiber mat can be remarkably maintained.     

Regional forecasts of photovoltaic power generation according to different data availability scenarios: a study of four methods

The development of methods to forecast photovoltaic (PV) power generation regionally is of utmost importance to support the spread of such power systems in current power grids. The objective of this study is to propose and to evaluate methods to forecast regional PV power 1 day ahead of time and to compare their performances. Four forecast methods were regarded, of which two are new ones proposed in this study. Together, they characterize a set of forecast methods that can be applied in different scenarios regarding availability of data and infrastructure to make the forecasts. The forecast methods were based on the use of support vector regression and weather prediction data. Evaluations were performed for 1 year of hourly forecasts using data of 273 PV systems installed in two adjacent regions in Japan, Kanto, and Chubu. The results show the importance of selecting the proper forecast method regarding the region characteristics. For Chubu, the region with a variety of weather conditions, the forecast methods based on single systems' forecasts and the one based on stratified sampling provided the best results. In this case, the best annual normalized root mean square error (RMSE) and mean absolute error (MAE) were 0.25 and 0.15 kWh/kWh_avg, respectively. For Kanto, with homogeneous weather conditions, the four methods performed similarly. In this case, the lowest annual forecast errors were 0.33 kWh/kWh_avg for the normalized RMSE and 0.202 kWh/kWh_avg for the normalized MAE. Copyright © 2014 John Wiley & Sons, Ltd.     

Reactive processing of thermoset/thermoplastic blends: A potential for injection molding

Poly(2,6-dimethyl-1,4-phenylene ether) (PPE) is an engineering plastic with high heat distortion temperature. Melt processing of neat PPE is usually accompanied with thermal degradation. The degradation problem is solved by blending with polystyrene to reduce the processing temperature. We propose an alternative using triallylisocyanurate (TAIC). TAIC is a low viscosity liquid that can be cured by peroxide, e.g. α,α′-bis(t-butylperoxy-m-isopropyl)benzene (PBP), to provide a thermoset. The PPE/TAIC mixture was shown to have the upper critical solution temperature (UCST) type phase behavior. At the single-phase regime above UCST and below the cure temperature (∼180°C for PBP), the mixture had a low viscosity, less viscous than a conventional thermoplastic such as PC and PP. That is, a nice window for injection molding was available, e.g., at 100°C to 160°C for a 50/50 blend. After injecting into a hot mold set at cure temperature, the blend cured in a short time (∼80% conversion in 5 min). Then the molded and partly cured material kept its shape and dimensions during post-cure in a hot chamber at higher temperature (e.g. 250°C). Using transmission electron microscopy and dynamic mechanical analyses, it was shown that the cured blend had a bicontinuous two-phase structure with periodic spacings of ∼30 nm, suggesting a structure formation via a spinodal decomposition driven by the increase in molecular weight of TAIC during cure. The cured material showed excellent flexural strength and high chemical resistance.     

Mutation Analysis of Radioresistant Early-Stage Cervical Cancer

Radiotherapy is a definitive treatment for early-stage cervical cancer; however, a subset of this disease recurs locally, necessitating establishment of predictive biomarkers and treatment strategies. To address this issue, we performed gene panel-based sequencing of 18 stage IB cervical cancers treated with definitive radiotherapy, including two cases of local recurrence, followed by in vitro and in silico analyses. Simultaneous mutations in KRAS and SMAD4 (KRAS^mt/SMAD4^mt) were detected only in a local recurrence case, indicating potential association of this mutation signature with radioresistance. In isogenic cell-based experiments, a combination of activating KRAS mutation and SMAD4 deficiency led to X-ray resistance, whereas either of these factors alone did not. Analysis of genomic data from 55,308 cancers showed a significant trend toward co-occurrence of mutations in KRAS and SMAD4. Gene Set Enrichment Analysis of the Cancer Cell Line Encyclopedia dataset suggested upregulation of the pathways involved in epithelial mesenchymal transition and inflammatory responses in KRAS^mt/SMAD4^mt cancer cells. Notably, irradiation with therapeutic carbon ions led to robust killing of X-ray-resistant KRAS^mt/SMAD4^mt cancer cells. These data indicate that the KRAS^mt/SMAD4^mt signature is a potential predictor of radioresistance, and that carbon ion radiotherapy is a potential option to treat early-stage cervical cancers with the KRAS^mt/SMAD4^mt signature.     

An Innovative Customized Biomimetic Hydrogel for Drug Screening Application Potential: Biocompatibility and Cell Invasion Ability

The ability of Pluronic F127 (PF127) conjugated with tetrapeptide Gly-Arg-Gly-Asp (GRGD) as a sequence of Arg-Gly-Asp (RGD) peptide to form the investigated potential hydrogel (hereafter referred to as 3DG bioformer (3BE)) to produce spheroid, biocompatibility, and cell invasion ability, was assessed in this study. The fibroblast cell line (NIH 3T3), osteoblast cell line (MG-63), and human breast cancer cell line (MCF-7) were cultured in the 3BE hydrogel and commercial product (Matrigel) for comparison. The morphology of spheroid formation was evaluated via optical microscopy. The cell viability was observed through cell counting Kit-8 assay, and cell invasion was investigated via Boyden chamber assay. Analytical results indicated that 3BE exhibited lower spheroid formation than Matrigel. However, the 3BE appeared biocompatible to NIH 3T3, MG-63, and MCF-7 cells. Moreover, cell invasion ability and cell survival rate after invasion through the 3BE was displayed to be comparable to Matrigel. Thus, these findings demonstrate that the 3BE hydrogel has a great potential as an alternative to a three-dimensional cell culture for drug screening applications.     

Durability of radiation-sterilized polymers III. Oxidation layer determined by chemiluminescence

Chemiluminescence (CL) analysis was used for determining the oxidation layer formed by the irradiation of polypropylene for medical supplies. The depth of the oxidation layer from the surface depended on dose rate and increased with decreasing dose rate. The oxidation occurred remarkably at a region near the surface area of the film where the diffusion of oxygen is more sufficient. On the contrary, there was very little oxidation in the interior portion. The oxidation layers of polypropylene samples irradiated with electron beam showed U-shaped profiles in the cross-section of film as did as a sample irradiated with γ-rays. However, the degree of oxidation by irradiation with electron beam was very small; CL intensity at the surface area was only one-third that for the γ-irradiated samples.     

Correlation of reactivity to hydrogenation and chemical structure of lignites

Three North Dakota lignites with almost the same percentage carbon have been used to determine the relation between chemical structure and reactivity to hydrogenation. Average structural indices of the lignites were estimated using the pyridine-soluble products after alcohol-alkali treatment, the structural indices obtained at various reaction times being extrapolated to zero reaction time. Hydrogenation was influenced by the average structure, with the lignite having higher aromaticity, higher molecular weight of the pyridine extract from the alcohol-alkali reaction product, larger aromatic ring size and lower content of aliphatic structure, showing a smaller degree of conversion.     

HNF1A Mutations and Beta Cell Dysfunction in Diabetes

Understanding the genetic factors of diabetes is essential for addressing the global increase in type 2 diabetes. HNF1A mutations cause a monogenic form of diabetes called maturity-onset diabetes of the young (MODY), and HNF1A single-nucleotide polymorphisms are associated with the development of type 2 diabetes. Numerous studies have been conducted, mainly using genetically modified mice, to explore the molecular basis for the development of diabetes caused by HNF1A mutations, and to reveal the roles of HNF1A in multiple organs, including insulin secretion from pancreatic beta cells, lipid metabolism and protein synthesis in the liver, and urinary glucose reabsorption in the kidneys. Recent studies using human stem cells that mimic MODY have provided new insights into beta cell dysfunction. In this article, we discuss the involvement of HNF1A in beta cell dysfunction by reviewing previous studies using genetically modified mice and recent findings in human stem cell-derived beta cells.