Novel synthesis of branched polystyrenes by quasi‐living radical copolymerization using photofunctional inimer

Branched polystyrenes were prepared by quasi‐living radical copolymerization of N,N‐diethylaminodithiocarbamoylmethylstyrene (inimer: DTCS) with styrene under UV irradiation. DTCS monomers play an important role in this copolymerization system as an inimer capable of initiating living radical polymerization of the vinyl group. Two monomers (DTCS and styrene) showed equal reactivity toward both propagating species, and the copolymer composition was the same as the comonomer feed. This result means that both the branching and chain length of the hyperbranched molecules can be controlled statistically by the feed monomer ratios. The compact nature of the branched macromolecules is demonstrated by viscosity measurements compared to the linear analogues. © 2001 Society of Chemical Industry     

Thermal degradation characteristics of oil‐filled cable joint with extremely degraded tan δ oil

Much of oil‐filled (OF) cable has been used for a long time as 66‐ to 500‐kV extrahigh‐voltage cable. Sometimes we can see extremely degraded tan δ oil (several tens of percent of tan δ, for example) in joint boxes, etc. The values of tan δ calculated by a simple combination model of paper/oil show that the oil‐impregnated paper with such a high tan δ oil likewise has an extremely high tan δ, which must result in thermal breakdown. However, such an event has not taken place up to the present in actually operated transmission lines. This fact suggests that some mechanism for the suppression of tan δ has acted in the paper insulation impregnated with degraded tan δ oil. Therefore, we investigated in detail the tan δ characteristics of paper impregnated with extremely high tan δ oil. In addition, based on the investigation results, we developed a method for simulation of heat generation by dielectric loss in an OF cable joint (which has degraded tan δ oil). © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 178(1): 1–10, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21184     

Electrical and electroluminescent properties of poly(p-phenylene vinylene) LB films based LEDs using aluminum metal as the electrode

The electrical properties of poly(p-phenylene vinylene) (PPV) Langmuir-Blodgett (LB) films were investigated, wherein transparent indium-tin oxide (ITO) and aluminum (Al) were used as the electrodes. Their I–V characteristics depended strongly on the thickness of PPV LB film, and the electric conductivity of the PPV LB film was in the range of 10⁻²–10⁻¹⁵ (S/cm). Their C–V characteristics showed that the capacitance was reversibly proportional to the thickness of PPV LB film and was kept constant when the applied voltage changed from −1.0 V to +1.0 V. These results indicated that PPV LB film was an insulator in this range of applied voltage without doping. Under forward bias, yellow-green light emission was observed in PPV LB film based light emitting diodes (LEDs), the highest light emission reached more than 100 cd/m² in the case that PPV LB film was deposited for 80 layers, i.e. a ITO/PPV(80L)/Al device.     

Observation of the solid-state formation of a TTF–CA complex by terahertz spectroscopy

The solid-state synthesis of a tetrathiafulvalene–chloranil (TTF–CA) complex was demonstrated, and progress in the formation of the complex was monitored using a GaP Raman terahertz (THz) spectrometer. Clear transitions in the THz absorption spectra indicated that the mixture of TTF and CA became the black phase TTF–CA complex. The results of X-ray diffraction, Raman scattering, and FTIR spectra are presented as supporting evidence.     

Three-dimensional shape recognition method using ultrasonics for manipulator control system

This article describes a three-dimensional shape recognition method that employs an ultrasonic distance sensor mounted on a manipulator, and its application to a manipulator control system. The principle of the method is to reconstruct an object surface numerically using both distance and orientation informations of an object. The method makes it possible to control the manipulator, to set the sensor in any position and orientation employing freedom of the manipulator, and to measure the object. The method is available for manipulator control because it can precisely assess the distance from the manipulator to the object, as well as reconstruct the object shape. Experimental results show that the newly developed method make object shape recognition easy and inexpensive. Application experiment proved that the method is effective for manipulator work due to its provision of distance information.     

The effectiveness of system integration in CIMS of Japanese companies

Under the present situation of diversification of users' needs, rapid technological innovation and internationalization, most Japanese manufacturers are required, as a management strategy, to develop an effective production system with small lot size and short production lead time. In order to meet these requirements, CIMS(computer-integrated manufacturing system) has been developed and introduced for practical use as a new computer-based production system. CIMS is characterized as an integrated system of software and hardware for production management with the purpose of meeting market requirements and counteracting fluctuations in users' demand by maintaining effective production planning and control. The style of CIMS varies with conditions of production and goals of system design. The purpose of this study is to investigate its effectiveness and examine future problems of system integration of CIMS in terms of production management in Japanese manufacturing companies.     

Urolithiasis associated with Crohn's disease: a case report

We report a case of urolithiasis caused by surgical treatment for Crohn's disease. A 28-year-old woman was referred to our department for further examination of renal stones from the medical department in September, 1995. She suffered from Crohn's disease and had a history of jejuno-ileal resection because of perforation of the ileum in 1988. Radiographs revealed multiple bilateral renal stones, and the urine oxalate concentration was elevated. She was treated with extracorporeal shock wave lithotripsy and the administration of sodium bicarbonate and citrate, but these treatments did not prevent recurrence and enlargement of stones. Renal function was gradually worsened and we performed transurethral lithotomy and percutaneous nephrolithotripsy. The stones were mainly composed of oxalate calcium monohydrate. A renal biopsy was performed at the operation, showing deposition of crystals in almost all renal tubules. Diet therapy (low oxalate and low fat) and the administration of sodium bicarbonate and citrate were performed strictly and recurrence was not recognized 10 months after complete removal of the stones.     

Statistical games and software tools for quality assurance based on statistical process control

This paper proposes two kinds of statistical games constructed to show how to achieve quality assurance system based on SPC(statistical process control) by using simple models and software tools. Proposed games are Coin Shooting Game and Paper Glider Releasing Game. These games can be played on a table using simple materials, and are easy to play. These are described by showing actual data.

Participants of these games get necessary outputs timely by using prepared software tools so that they can execute an effective and efficient decision. These save time and also raise the level of understanding how to achieve quality assurance system based on SPC.