Engineering surface and development of a new DNA micro array chip

This paper proposes a new concept of the ‘engineering surface’, which extends the conventional idea of a functional surface by combining it with micro/nano manufacturing technology. Characteristic features and possibilities of the engineering surface are discussed in detail. This paper reviews studies on micro/nano fabrication technologies for advanced materials and evaluation technology for surface function. New fabrication technologies, micro machining and nano forming, are introduced, which will be basic manufacturing processes of the engineering surface. Also, a new surface evaluation technique is introduced for the surface energy of the nano fabricated surface. Design of a new DNA micro array chip is introduced as an example of applications of the engineering surface. Controllability of surface property by nano fabrication is studied.     

Hydrogen-bond-assisted isotactic-specific radical polymerization of N-isopropylacrylamide with pyridine N-oxide

Radical polymerization of N-isopropylacrylamide (NIPAAm) in CHCl₃ at low temperatures in the presence of pyridine N-oxide (PNO) was investigated. An isotactic poly(NIPAAm) with meso diad content of 61% was successfully prepared at −60 °C in the presence of a two-fold amount of PNO. Thermodynamic analysis suggested that the isotactic-specificity was entropically induced, probably due to conformational fixation near the propagating chain-end through coordination by PNO.     

Electrical and electroluminescent properties of poly(p-phenylene vinylene) LB films based LEDs using aluminum metal as the electrode

The electrical properties of poly(p-phenylene vinylene) (PPV) Langmuir-Blodgett (LB) films were investigated, wherein transparent indium-tin oxide (ITO) and aluminum (Al) were used as the electrodes. Their I–V characteristics depended strongly on the thickness of PPV LB film, and the electric conductivity of the PPV LB film was in the range of 10⁻²–10⁻¹⁵ (S/cm). Their C–V characteristics showed that the capacitance was reversibly proportional to the thickness of PPV LB film and was kept constant when the applied voltage changed from −1.0 V to +1.0 V. These results indicated that PPV LB film was an insulator in this range of applied voltage without doping. Under forward bias, yellow-green light emission was observed in PPV LB film based light emitting diodes (LEDs), the highest light emission reached more than 100 cd/m² in the case that PPV LB film was deposited for 80 layers, i.e. a ITO/PPV(80L)/Al device.     

Determination of the glass transition temperature of polymer/layered silicate nanocomposites from positron annihilation lifetime measurements

The glass transitions of acrylonitrile-butadiene rubber (NBR)/organoclay nanocomposites with various silicate contents were investigated using positron annihilation lifetime spectroscopy (PALS). The nanocomposites were prepared through melt intercalation of NBR with various concentrations of organoclay (OC30B) modified with the organic modifier, methyl tallow bis(2-hydroxyethyl) quaternary ammonium (MT2EtOH), i.e., Cloisite^® 30B. X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM) measurements of the NBR/OC30B nanocomposites showed that the NBR chains were intercalated between the silicate layers, thereby increasing the gallery heights of the organosilicates. The glass transition temperature of NBR was determined using differential scanning calorimetry (DSC). However, it seemed to be very difficult to clearly resolve the very small differences in T_gs caused from various loading of nanosized silicate in NBR/OC30B nanocomposites. Hence, we performed positron annihilation lifetime spectroscopy (PALS) on NBR/OC30B nanocomposites containing various amounts of OC30B (1-10 wt%). Significant changes in the temperature dependencies of free volume parameters (i.e., lifetimes and intensities) were observed at the transition temperature, T_g,PALS, and the T_g,PALS values were found to increase with increasing organoclay content in the samples. These observations are consistent with PALS having a higher sensitivity in the detection of very small changes in free volume properties. The present findings thus highlight the usefulness of PALS for studying phase transition phenomena in polymeric materials with nanoscale structural variations.     

Zirconia Coating on Stainless Steel Sheets from Organozirconium Compounds

The stability and the coating characteristics of a variety of organozirconium compounds have been investigated to coat ZrO₂ films on stainless steets for the improvement of heat resistance against oxidation. Zirconium tetraoctylate and zirconium tetrakis(acetylacetonate) were found to be more stable than zirconium alkoxides in an ambient atmosphere. The ZrO₂ films from zirconium alkoxides became white and discontinuous when the thickness of the films exceeded about 200 Å (20 nm). On the other hand, transparent ZrO₂ films were obtained from zirconium tetraoctylate and zirconium tetrakis(acetylacetonate). The IR spectra of the films showed that the heat treatment at 400°C for 5 min produced organic-free ZrO₂ films. The heat resistance of stainless steel sheets against oxidation was improved by the ZrO₂ coating, depending on the film thickness.     

Behavior of N-methylcarbamate pesticides during refinement processing of edible oils

The following N-methylcarbamate pesticides, aldicarb, aldicarb sulfoxide, aldicarb sulfone, oxamyl, methomyl, thiodicarb, propoxur, carbofuran, carbosulfan, benfuracarb, bendiocarb, carbaryl, fenobcarb and furathiocarb, were added to soybean oil, each at 5 mg/kg(5 ppm), followed by degumming, alkali refining, bleaching and deodorization for oil refinement. Residual pesticide content in each case was determined immediately after refining. DEGUMMING: Aldicarb, aldicarb sulfoxide, aldicarb sulfone, oxamyl, thiodicarb, carbosulfan, benfuracarb were each found to decrease by as much as 70% by H(3)PO(4) treatment, this being less than 26% noted for the other pesticides. With hot water treatment, the decrease in any one pesticide was less than 52%. ALKALI REFINING: The rate of decrease varied with the pesticide, ranging from 8% to 100%. 200%NaOH were effectively brought about pesticide removal, compared to 125%NaOH. BLEACHING: Aldicarb, aldicarb sulfoxide, aldicarb sulfone, oxamyl, methomyl, thiodicarb, carbosulfan, benfuracarb, bendiocarb and furathiocarb each decreased by more than 80% with activated clay containing activated charcoal. Carbaryl decreased remarkably by this clay. Pesticide removal in all cases was at less than 30%. DEODORIZATION: 40% Furathiocarb, 14% carbosulfan, 11% benfuracarb and 3% carbofuran could still be detected subsequent to deodorization at 260 degrees C while all other pesticide amounts were too small to permit quantitative detection. Degumming with H(3)PO(4) and bleaching with activated clay caused the conversion of carbosulfan and benfuracarb into carbofuran. Carbofuran and furathiocarb may thus possibly still remain in the oil following the above 4 refinement processes.     

Characterization of a Novel Thermostable Dye-Linked l-Lactate Dehydrogenase Complex and Its Application in Electrochemical Detection

Flavoenzyme dye-linked l-lactate dehydrogenase (Dye-LDH) is primarily involved in energy generation through electron transfer and exhibits potential utility in electrochemical devices. In this study, a gene encoding a Dye-LDH homolog was identified in a hyperthermophilic archaeon, Sulfurisphaera tokodaii. This gene was part of an operon that consisted of four genes that were tandemly arranged in the Sf. tokodaii genome in the following order: stk_16540, stk_16550 (dye-ldh homolog), stk_16560, and stk_16570. This gene cluster was expressed in an archaeal host, Sulfolobus acidocaldarius, and the produced enzyme was purified to homogeneity and characterized. The purified recombinant enzyme exhibited Dye-LDH activity and consisted of two different subunits (products of stk_16540 (α) and stk_16550 (β)), forming a heterohexameric structure (α3β3) with a molecular mass of approximately 253 kDa. Dye-LDH also exhibited excellent stability, retaining full activity upon incubation at 70 °C for 10 min and up to 80% activity after 30 min at 50 °C and pH 6.5–8.0. A quasi-direct electron transfer (DET)-type Dye-LDH was successfully developed by modification of the recombinant enzyme with an artificial redox mediator, phenazine ethosulfate, through amine groups on the enzyme’s surface. This study is the first report describing the development of a quasi-DET-type enzyme by using thermostable Dye-LDH.     

Detection of pathogenic bacteria by using zinc finger protein fused with firefly luciferase

We constructed a novel bacterial genome detection system using zinc finger protein (ZF) fused with firefly luciferase (ZF-luciferase). Taking advantage of the direct recognition of double-stranded DNA (dsDNA) by ZF, we previously constructed bacterial genome detection systems that did not require dehybridization processes. To detect polymerase chain reaction (PCR) products rapidly and with a high sensitivity, we constructed two kinds of ZF-luciferase, Sp1-fused luciferase (Sp1-luciferase), and Zif268-fused luciferase (Zif268-luciferase). ZF-luciferase not only maintains luciferase activity but also shows dsDNA-binding ability and specificity. Furthermore, we succeeded in the detection of 10 copies of the genome of Legionella pneumophila and Escherichia coli O157. ZF-luciferase would be a useful tool for highly sensitive detection of pathogenic bacterial genome.     

Beta tricalcium phosphate ceramics with controlled crystal orientation fabricated by application of external magnetic field during the slip casting process

Beta tricalcium phosphate (β-TCP) is a resorbable bioceramic that has hitherto been utilized in the medical field. Since it crystallizes in the anisotropic hexagonal system, properties such as chemical and physical ones are expected to depend on its crystal axis direction and/or on its crystal plane (anisotropy). Control of crystal orientation is thus important when used in polycrystalline form. Meanwhile, application of a strong magnetic field has been found to be a promising technique to control crystal orientation of anisotropic shape or structured crystals. In this work, we attempted to fabricate β-TCP ceramics with controlled crystal orientation by applying an external magnetic field during the slip casting process and subsequently sintering them at 1050 °C, below the β–α transition temperature. Application of a vertical magnetic field increased intensities of planes perpendicular to c-plane on the top surface, while a horizontal one with simultaneous mechanical mold rotation decreased it. These results indicated that crystal orientation of β-TCP ceramics were successfully controlled by the external magnetic field and together that the magnetic susceptibility of β-TCP is χ_c⊥ > χ_c//.     

Sensitivity analysis of fuel pin failure performance under slow-ramp type transient overpower condition by using a fuel performance analysis code FEMAXI-FBR

The FEMAXI-FBR is a fuel performance analysis code and has been developed as one module of core disruptive evaluation system, the ASTERIA-FBR. The FEMAXI-FBR has reproduced the failure pin behavior during slow transient overpower. The axial location of pin failure affects the power and reactivity behavior during core disruptive accident, and failure model of which pin failure occurs at upper part of pin is used by reflecting the results of the CABRI-2 test. By using the FEMAXI-FBR, sensitivity analysis of uncertainty of design parameters such as irradiation conditions and fuel fabrication tolerances was performed to clarify the effect on axial location of pin failure during slow transient overpower. The sensitivity analysis showed that the uncertainty of design parameters does not affect the failure location. It suggests that the failure model with which locations of failure occur at upper part of pin can be adopted for core disruptive calculation by taking into consideration of design uncertainties.