Avoiding Routing Loops on the Internet

Suppose that some particular link in the Internet is currently congested. A natural solution is to try to make packets bypass that link. This can be done by increasing the cost of that link intentionally, say from a ₁ to a ₂, since the Internet uses shortest-path routing. Unfortunately, however, this often causes temporary loops for packet traveling, called routing loops. In this paper we show that routing loops can be avoided by increasing the cost of the link not directly from a ₁ to a ₂ but through an intermediate value, a ₃, i.e., from a ₁ to a ₃ and then to a ₂. We may need several intermediate values. We show that in this case the greedy strategy, namely, raising the cost as much as possible in each step, is optimal.     

Determination method of equivalent insulation test voltage at room temperature for high temperature superconducting power apparatus with coil structure

This paper deals with the determination method of the equivalent insulation test voltage at room temperature that secures the reliability of the cryogenic electrical insulation of the high temperature superconducting (HTS) power apparatus. The high voltage test is related to the apparatus with coil structure at the stages of its development, manufacturing and shipment. In the test method, the equivalent insulation test voltage at room temperature is derived from the standard test voltage at cryogenic temperature, based on the idea that the HTS power apparatus should be operated without partial discharges (PDs). The conversion factor between the two voltages is given by the product of the two medium factors, i.e. the one relating to the potential distribution along the coil winding and the other relating to the PD inception condition at the weakest part in the electrical insulation system. In order to determine the latter factor concerned with the non-linear phenomena against electrical stresses, the PD inception voltages at cryogenic and room temperatures are theoretically and experimentally estimated for modeled turn-to-turn insulation system. The results show that both estimated and measured values are in fairly good agreement and the proposed method is useful for the equivalent high voltage test at room temperature for the HTS power apparatus.     

Classification of amorphous-silicon microstructures by structural parameters: molecular dynamics study

Amorphous silicon is the most popular material in the field of semiconductors. However, little is known about its microstructures. To understand the dependence of these microstructures on the fabrication process and on structural relaxation, amorphous silicon samples fabricated by various simulated processes are classified according to structural parameters within the molecular dynamics method.

The results show that the amorphous structures fabricated by the melt-quench method have many odd-membered rings and large bond-angle deviation. The structures fabricated by the molecular-beam epitaxy method involve fewer floating bonds, smaller bond-angle deviations, and fewer six-membered rings in comparison with the melt-quenched structure. Through long-term annealing, both structures are transformed to the most stable structure as described by the Tersoff potential. It is also found that the continuous random network structure does not meet the Tersoff potential. Verification of the results through first-principle calculations shows that well-relaxed amorphous structure can be described by classical molecular dynamics despite the slightly large number of the floating bond and the overestimation of amorphous-phase energy.     

A study of reactor neutrino monitoring at the experimental fast reactor JOYO

We carried out a study of neutrino detection at the experimental fast reactor JOYO using a 0.76 tons gadolinium loaded liquid scintillator detector. The detector was set up on the ground level at 24.3 m from the JOYO reactor core of 140 MW thermal power. The measured neutrino event rate from reactor on-off comparison was 1.11±1.24(stat.)±0.46(syst.) events/day. Although the statistical significance of the measurement was not enough, backgrounds in such a compact detector at the ground level were studied in detail and MC simulations were found to describe the data well. A study for improvement of the detector for future such experiments is also shown.     

Nanowrinkled and Nanoporous Polyethylene Membranes Via Entanglement Arrangement Control

Crystalline homopolymers, including polyethylene (PE), which has the simplest architecture, form a nanometer‐sized combination of crystalline and amorphous components, but their arrangement control, similar to self‐assembled phase‐separation of block‐copolymers, is usually difficult. However, molecular entanglements trapped between crystalline and amorphous components of homopolymers coincide with the segmental linking points on the interfaces of the microphase separation for block copolymers. Nanowrinkled PE membranes are prepared with a network of 30 nm‐thick homogeneous lamellae using a novel entanglement control technique composed of biaxial melt‐drawing and melt‐shrinking procedures, which are limited for highly entangled ultrahigh molecular weight materials. Such a network arrangement of nanowrinkling lamellae spreading on membrane surface and also across the membrane thickness improves the mechanical properties of both tensile strength and tearing strength. Subsequent cold‐drawing causes delamination of the lamellar interfaces, leading to the resultant nanoporous morphology composed of passing‐through channels that are several tens of nanometers in diameter, without any solvent processing.     

Isolation and Characterization of Two Types of Xyloglucanases from a Phytopathogenic Fungus,Verticillium dahliae

Xyloglucan is a major hemicellulosic component in plant cell walls. Phytopathogenic fungi secrete cell wall-degrading enzymes on their infection to hosts, while the nature of the cell wall-lytic enzymes of such fungi are yet to be fully understood. Verticillium dahliae is a soil-borne fungus that causes vascular wilt diseases in a variety of commercially important crops worldwide. We purified two types of xyloglucanases, XEG12A and XEG74B, from the culture of naturally isolated Verticillium dahliae strain 2148. XEG12A showed a molecular size of 23 kDa with its maximal activity at pH 7.5. XEG12A specifically hydrolyzed xyloglucan with no activity on other β-glucans. XEG74B had a molecular size of 110 kDa with its optimum pH at 6.0. XEG74B primarily hydrolyzed xyloglucan, with a slight activity on β-1,3-1,4-glucan. Analysis of hydrolytic products of xyloglucanooligasaccharide (XXXGXXXG) by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) revealed that the both enzymes cleaved β-1,4-glucosidic linkage at the position of unbranched chain, while XEG74B showed a little fluctuation with the cleavage site. Both enzymes did not hydrolyzed xyloglucanoheptasaccharide (XXXG) at all. N-Terminal and internal amino acid sequencing of the enzymes revealed that XEG12A and XEG74B belonged to Glycoside Hydrolase (GH) Families 12 and 74, respectively. Based on these results we concluded that V. dahliae XEG12A and XEG74B were xyloglucan-specific endo-β-1,4-glucanases (EC 3.2.1.151).     

Traversable Region Estimation for Mobile Robots in an Outdoor Image

This paper describes a novel method to estimate appropriate traversable regions from an outdoor scene image. The traversable regions output by the proposed method reflect the common sense of people. For example, a candidate traversable region is “a paved road somewhat distant from the side ditch.” The input to the traversable region estimation is one color image. First, category is assigned to each pixel in the image. The categorization result is then input to the region estimator. Finally, the traversable region are estimated on the input image. An important aspect of this method is the application of two score functions in region estimation process. One score function places high value on categories selected as traversable paths by subjects. The other function places high value on categories that are not selected as traversable regions but are adjacent to categories with traversable paths. A combination of these two functions produces feasible estimation results. The effectiveness of the combined score functions was evaluated by experiments and a questionnaire.