Corrosion characteristics of reduced activation ferritic steel, JLF-1 (8.92Cr–2W) in molten salts Flibe and Flinak

Static corrosion tests were performed in molten salts, LiF–BeF₂ (Flibe) and LiF–NaF–KF (Flinak), at 500 °C and 600 °C for 1000 h. The purpose is to investigate the corrosion characteristics of reduced activation ferritic steels, JLF-1 (8.92Cr–2W) in the fluids. The concentration of hydrogen fluoride (HF) in the fluids was measured by slurry pH titration method before and after the exposure. The HF concentration determined the fluoridation potential. The corrosion was mainly caused by dissolution of Fe and Cr into the fluids due to fluoridation and/or electrochemical corrosion. Carbon on the surface might be dissolved into the fluids due to the corrosion, and this resulted to the decrease of carbide on the surface. The corrosion depth of the JLF-1 specimen, which was obtained from the weight losses, was 0.637 μm in Flibe at 600 °C and 6.73 μm in Flinak at 600 °C.     

Critical issues for the manufacture of the ITER TF coil winding pack

Research and trials by the Japan Atomic Energy Agency (JAEA) focus on the remaining technical issues in the ITER TF coil winding pack (WP) manufacturing process. Specific issues include the feasibility of automatically measuring conductor length during automatic winding with a high degree of accuracy (±0.02%) and a fabrication process to comply with the demanding tolerances (up to 1 mm distortion in flatness and 1.5 mm in-plane shrinkage) of the radial plate (RP) due to cover plate (CP) welding. The authors developed a new technique to measure conductor length very accurately by combining an ordinary encoder and a newly developed optical system. A simulation based on test results of CP welding using a RP mock-up indicates that a flatness of 1 mm is achievable, but the in-plane shrinkage of the RP is approximately 5 mm. One possible solution is to fabricate the RP larger than required to allow for in-plane shrinkage. Another solution is to reduce the thickness or length of the welding. The feasibility of these solutions to most of the major technical issues suggests that it is time for full qualification testing of the fabrication process in a dummy double-pancake trial.     

Molecular Design and Synthesis of a Novel Substrate for Assaying Lysozyme Activity

A novel substrate {Galβ1,4GlcNAcβ1,4GlcNAc-β-pNP [Gal(GlcNAc)₂-β-pNP]} for assaying lysozyme activity has been designed using docking simulations and enzymatic synthesis via β-1,4-galactosyltransferase-mediated transglycosylation from UDP-Gal as the donor to (GlcNAc)₂-β-pNP as the acceptor. Hydrolysis of the synthesized Gal(GlcNAc)₂-β-pNP and related compounds using hen egg-white lysozyme (HEWL) demonstrated that the substrate was specifically cleaved to Gal(GlcNAc)₂ and p-nitrophenol (pNP). A combination of kinetic studies and docking simulation was further conducted to elucidate the mode of substrate binding. The results demonstrate that Gal(GlcNAc)₂-β-pNP selectively binds to a subsite of lysozyme to liberate the Gal(GlcNAc)₂ and pNP products. The work therefore describes a new colorimetric method for quantifying lysozyme on the basis of the determination of pNP liberated from the substrate.     

Micro machining for control of wettability with surface topography

A micro fabrication is presented to manufacture hydrophobic surfaces with micro-scale structures. Hydrophobicity is controlled with the shape and the alignment of micro pillars in the structure. The structures are manufactured in large areas at high production rates in the following processes: (1) the structure is fabricated on a tool by focused ion beam sputtering; (2) the reverse structure is formed on a metal plate by incremental stamping using the structured tool; and (3) the structure is transferred onto plastic plates by molding. A consecutive stamping is also proposed to fabricate several structures on a surface accurately with a structured tool, in which the moving pitch of the structured tool is numerically controlled. The effect of the surface topography on hydrophobicity is discussed with measuring contact angles on the structured surfaces in the water droplet tests. Hydrophobicity on the plastic plate is associated with the solid fraction on the structured surface based on the Cassie–Baxter model. A larger contact angle is observed for a smaller solid fraction of the surface.     

Antihypertensive Effect of Salt-Free Soy Sauce,a New Fermented Seasoning,in Spontaneously Hypertensive Rats

ABSTRACT: In this study, we focused on the antihypertensive effect of newly fermented salt-free soy sauce (SFS) in spontaneously hypertensive rats (SHRs). A 13-wk oral administration of SFS was performed daily in 8- to 21-wk-old SHRs with a dose of 200 mg/kg of body weight/d. The systolic (SBP) and diastolic (DBP) blood pressures were measured for each week during the experimental period. As a result, a significant (P < 0.01) BP lowering effect was observed from the 5th d to the end of the experiment in the SFS group compared with the control group (ΔSBP_21-wk: 27 mmHg, ΔDBP_21-wk: 20 mmHg). In contrast to such substantial effect by SFS intake, angiotensin I-converting enzyme activities in blood and local organs as well as pharmaceutical parameters such as serum Na⁺ or K⁺ level did not show any significant difference between in both SFS and control groups. Vasoconstriction experiment using thoracic aorta rings from 21-wk SHRs provided an interesting result that the rings from the SFS group evoked a >2-fold higher increase in the angiotensin II-stimulated constrictive response compared with the rings from the control group (P = 0.012), which suggested that the SFS-intake would be effective in possessing a higher vessel tone. Practical Application: In this study, we investigated the antihypertensive effect of newly fermented SFS in SHRs. As a result of 13-wk SFS-administration, we found a significant antihypertensive effect of the SFS. This finding strongly demonstrates that the developed SFS would be greatly beneficial for health and useful for health-related industries.     

Precise disturbance modeling for improvement of positioning performance

This paper presents a modeling methodology for unknown disturbances in mechatronics systems, based on disturbance estimation using an iterative learning process. In disturbance modeling, nonlinear frictions are specially handled as disturbances in the mechanisms, which mainly degrade trajectory control performance. Friction can be mathematically modeled by using learned estimation data as a function of the displacement, velocity. acceleration, and jerk of the actuator. This model has the distinctive feature that friction compensation can be achieved with a generalization capability for different conditions. The proposed positioning control approach with disturbance modeling and compensation has been verified by experiments using a table drive system on a machine stand. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(2): 31–39, 2010; Published online in Wiley InterScience ( www. interscience.wiley.com ). DOI 10.1002/eej.20928     

Influence of a fiber-network microstructure of paper-structured catalyst on methanol reforming behavior

A novel microstructured catalyst that consists of Cu/ZnO catalyst powders and ceramic fibers was successfully prepared using pulp fibers as a tentative matrix by a papermaking technique. As-prepared material, called a paper-structured catalyst, possessed porous microstructure with layered ceramic fiber networks (average pore size ca. 20 μm, porosity ca. 50%). In the process of methanol autothermal reforming (ATR) to produce hydrogen, paper-structured catalysts demonstrated both high methanol conversion and low concentration of undesirable carbon monoxide as compared with catalyst powders and pellets. The catalytic performance of paper-structured catalysts depended on the use of pulp fibers, which were added in the paper-forming process and finally removed by thermal treatment before ATR performance tests. Confocal laser scanning microscopy and mercury intrusion analysis suggested that the tentative pulp fiber matrix played a significant role in regulating the fiber-network microstructure inside paper composites. Various metallic filters with different average pore sizes, used as supports for Cu/ZnO catalysts, were subjected to ATR performance tests for elucidating the pore effects. The tests indicated that the pore sizes of catalyst support had critical effects on the catalytic efficiency: the maximum hydrogen production was achieved by metallic filters with an average pore size of 20 μm. These results suggested that the paper-specific microstructures contributed to form a suitable catalytic reaction environment, possibly by promoting efficient diffusion of heat and reactants. The paper-structured catalyst with a regular pore microstructure is expected to be a promising catalytic material to provide both practical utility and high efficiency in the catalytic gas-reforming process.     

High‐current lightning discharges in winter

Lightning electric‐field waveforms related to power line faults in winter have been identified. Most of those waveforms appear to be associated with upward lightning discharges with absolute peak currents of over 100 kA. They are quite different from common return‐stroke waveforms, and the lightning discharges which produce these characteristic waveforms are called GC (Ground to Cloud) flashes. These high‐current lightning discharges are distributed around the coastline in different ways depending on their polarities. The spatial distributions of high‐current lightning discharges around Japan are also investigated. It is revealed that the region of Honshu Island along the coastline of the Sea of Japan belongs to the area in which the density of high‐current lightning flashes is the highest in Japan through the year. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(1): 8–15, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20874     

Surface Waves on Superfluid <Superscript>4</Superscript>He Under Reduced Gravity

Superfluid ⁴He was produced on a small jet plane for the first time using a small GM-refrigerator to condense the liquid and a scroll pump to get the superfluid by evaporation. The surface wave on superfluid under 0.5g _E, 0.1g _E and 0.05g _E, together with 2g _E and 1g _E, was successfully examined by an optical method utilizing parabolic flight. Here, g _E is the gravitational constant on the ground. Assuming that only the fundamental mode was excited as determined by the sample cell width, the resonance peak in the frequency domain was well reproduced by the gravity wave with corresponding gravity constant.     

Highwall Stability due to Punch Mining at Opencut Coal Mines

Conventional highwall mining extracts coal with an auger machine or a continuous miner from exposed seams at the base of opencut or strip operations. However, under poor strata and high stress conditions, highwall mining cannot be conducted due to pillar and roof failures. In such cases, punch highwall mining is more effective than the conventional highwall mining. This paper describes conventional highwall mining and punch highwall mining systems and discusses the stability of the highwall due to punch highwall mining at opencut coal mines.