Computerized DSS for Construction Conflict Resolution under Uncertainty

Due to the inherent nature of construction projects, conflicts are unavoidable among the various parties involved. Such conflicts often delay projects and cause losses for all parties. This paper presents the development of a decision support system (DSS) to help in resolving construction disputes. The DSS integrates the elimination method to shortlist promising resolutions to a conflict, the graph model for conflict resolution to determine the best resolution that satisfies all decision makers’ preferences, and the information gap theory to consider uncertain decision preferences. A prototype system has been developed and a case study of a construction conflict used to demonstrate its features. The presented methodology for construction conflict resolution is useful for both researchers and practitioners to better deal with the dispute-prone nature of the construction industry under uncertainty and lack of information. In this paper, the proposed prototype successfully simulated and predicted the sequence of decisions that took place in the case study dispute, in the presence of uncertainty.     

Ultraviolet‐C Light Sanitization of English Cucumber (Cucumis sativus) Packaged in Polyethylene Film

Food safety is becoming an increasing concern in the United States. This study investigated the effects of ultraviolet‐C (UV‐C) light as a postpackaging bactericidal treatment on the quality of English cucumber packaged in polyethylene (PE) film. Escherichia coli k‐12 was used as a surrogate microbe. The microbial growth and physical properties of packaged cucumbers were analyzed during a 28‐d storage period at 5 °C. Inoculating packaged cucumbers treated at 23 °C for 6 min with UV‐C (560 mJ/cm²) resulted in a 1.60 log CFU/g reduction. However, this treatment had no significant effect (P > 0.05) on the water vapor transmission rate or oxygen transmission rate of the PE film. Results show that UV‐C light treatment delayed the loss of firmness and yellowing of English cucumber up to 28 d at 5 °C. In addition, UV‐C light treatment extended the shelf life of treated cucumber 1 wk longer compared to untreated cucumbers. Electron microscopy images indicate that UV‐C light treatment influences the morphology of the E. coli k‐12 cells. Findings demonstrate that treating cucumbers with UV‐C light following packaging in PE film can reduce bacterial populations significantly and delay quality loss. This technology may also be effective for other similarly packaged fresh fruits and vegetables.     

Large-scale parallel arrays of silicon nanowires via block copolymer directed self-assembly

Extending the resolution and spatial proximity of lithographic patterning below critical dimensions of 20 nm remains a key challenge with very-large-scale integration, especially if the persistent scaling of silicon electronic devices is sustained. One approach, which relies upon the directed self-assembly of block copolymers by chemical-epitaxy, is capable of achieving high density 1?:?1 patterning with critical dimensions approaching 5 nm. Herein, we outline an integration-favourable strategy for fabricating high areal density arrays of aligned silicon nanowires by directed self-assembly of a PS-b-PMMA block copolymer nanopatterns with a L(0) (pitch) of 42 nm, on chemically pre-patterned surfaces. Parallel arrays (5 × 10(6) wires per cm) of uni-directional and isolated silicon nanowires on insulator substrates with critical dimension ranging from 15 to 19 nm were fabricated by using precision plasma etch processes; with each stage monitored by electron microscopy. This step-by-step approach provides detailed information on interfacial oxide formation at the device silicon layer, the polystyrene profile during plasma etching, final critical dimension uniformity and line edge roughness variation nanowire during processing. The resulting silicon-nanowire array devices exhibit Schottky-type behaviour and a clear field-effect. The measured values for resistivity and specific contact resistance were ((2.6 ± 1.2) × 10(5)Ωcm) and ((240 ± 80) Ωcm(2)) respectively. These values are typical for intrinsic (un-doped) silicon when contacted by high work function metal albeit counterintuitive as the resistivity of the starting wafer (～10 Ωcm) is 4 orders of magnitude lower. In essence, the nanowires are so small and consist of so few atoms, that statistically, at the original doping level each nanowire contains less than a single dopant atom and consequently exhibits the electrical behaviour of the un-doped host material. Moreover this indicates that the processing successfully avoided unintentional doping. Therefore our approach permits tuning of the device steps to contact the nanowires functionality through careful selection of the initial bulk starting material and/or by means of post processing steps e.g. thermal annealing of metal contacts to produce high performance devices. We envision that such a controllable process, combined with the precision patterning of the aligned block copolymer nanopatterns, could prolong the scaling of nanoelectronics and potentially enable the fabrication of dense, parallel arrays of multi-gate field effect transistors.     

Seismic Behavior of As-Built, ACI-Complying, and CFRP-Repaired Exterior RC Beam-Column Joints

In this paper, the efficiency and effectiveness of carbon-fiber-reinforced polymer (CFRP) sheets for upgrading the shear strength and ductility of a seismically deficient exterior beam-column joint were studied and compared with an American Concrete Institute (ACI)-based design joint specimen. One as-built joint specimen, representing the preseismic code design and construction practice for joints and one ACI-based design joint specimen, satisfying the seismic design requirements of the current code of practice were cast. The as-built specimen was used as baseline (control) specimen. These two specimens (i.e., the as-built control and the ACI-based specimens) were subjected to cyclic lateral load histories to induce damage equivalent to damage expected from a severe earthquake. The damaged control specimen was then repaired by filling its cracks with epoxy and externally bonding CFRP sheets to the joint, the beam, and part of the column regions. This specimen was identified as the repaired specimen. The repaired specimen was subjected to a similar cyclic lateral load history, and its response history was recorded. The response histories of the as-built control, the repaired, and the ACI-based design specimen were then compared. The test results demonstrated that externally bonded CFRP sheets can effectively improve both the shear strength and the deformation capacity of seismically deficient and damaged beam-column joints to a state comparable to the ACI-based design joint.     

Polymerization behavior of methylol-functional benzoxazine monomer

This study focuses on methylol functional benzoxazines as precursors to build a network structure utilizing both benzoxazine and resole chemistry. The first part is a review of systems that contain methylol groups which play a role on their crosslinking formation. The polymerization mechanism and properties of resoles will be highlighted as the most abundant polymers that are characterized by polymerization through condensation reaction of methylol group. In the second part, the effect of incorporating methylol group into benzoxazine monomers is studied. Differential scanning calorimetry (DSC) is used to study the effect of methylol group on the rate of polymerization. Kissinger and Ozawa methods using non-isothermal DSC at different heating rates show that methylol monomer exhibits lower average activation energy compared to the un-functionalized monomer. The effect of adding catalysts into the monomers is also studied. p-Toluene sulfonic acid (PTSA) is found to be more efficient than 1-methyl-imidazole (IMD) and lithium iodide (LiI) in the case of methylol monomer due to its ability of accelerating both the methylol condensation and ring-opening polymerization. Additionally, thermal behavior of the monomers is studied using thermogravimetric analysis (TGA).     

Hydrogen absorption characteristics of mechanically alloyed Ti–Zr–Ni and Ti–V–Ni powders

A first investigation into the production of amorphous and nanostructured Ti-based alloys with nominal compositions Ti_41.5Zr_41.5Ni₁₇, Ti₆₁Zr₂₂Ni₁₇, Ti_41.5V_41.5Ni₁₇ and Ti₆₁V₂₂Ni₁₇ by mechanical alloying (MA) technique is presented. This technique was adopted to produce alloys' powders with high fresh surface area that were active for hydrogen storage. Hydrogen absorption characteristics and structure changes in the alloys after hydrogenation were investigated. Gas phase hydrogenation of the Ti–Zr–Ni alloys, at 573 K and an initial hydrogen pressure of 2 MPa, exhibited good hydriding properties and started at a maximal rate without induction period with a hydrogenation capacity up to 1.2 wt%. However, hydriding of Ti–V–Ni alloys at the same conditions exhibited slower rates. The Ti₆₁V₂₂Ni₁₇ composition showed high hydrogen absorption capacity of 1.8 wt% and exceeded 4 wt% at 345 K. In addition, the Ti–V–Ni alloys showed structure stability after hydrogenation and retained the amorphous structure.     

Tuned interactions of silver nanoparticles with ZSM-5 zeolite by adhesion-promoting poly(acrylic acid) deposited by electrospray ionization (ESI)

The electrospray ionization (ESI) method was used for deposition of thin films of poly(acrylic acid) (PAA) on Cu/ZSM-5 (5 wt.% Cu) and Ag–Cu/ZSM-5 (1 wt.% Ag and 4 wt.% Cu) composites. For comparative purposes, the ZSM-5 zeolite was synthesized under hydrothermal conditions and loaded with PAA under the same treating conditions as the composites. This method allowed the formation of uniform polymer films of controlled thickness on conductive substrates. The structural characteristics were characterized by X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, atomic force microscopy and X-ray diffraction (XRD). The deposited PAA layer over ZSM-5 acts as a common dispersing and stabilizing agent through coordination-driven guest-templated polymer via interaction of Ag⁺ and Cu²⁺ with carboxylic acid groups, thus increasing and controlling the adhesion and the release of metallic species. A short exposure to light and temperature has reduced the metal ions to Cu⁰ and Ag⁰ metallic nanoparticles. The results of XRD analysis let suggest that the interaction of Cu and Ag with carboxylic groups of PAA inhibits the formation of large metallic silver particles. These samples were being studied for their potential as antibacterial agents toward the bacterial strains such as Staphylococcus pneumonia, Bacillus subtilis, Escherichia coli and Pseudomonas aeruginosa as Gram positive and Gram negative bacteria, respectively. Aspergillus fumigatus and Candida albicans as Fungi were also evaluated. The Cu/ZSM-5 and Ag–Cu/ZSM-5 nanocomposites coated with a 10 nm thick PAA layer exhibit significant antibacterial activity.     

Improving Design Coordination for Building Projects. II: A Collaborative System

The objective of this paper is to utilize recent advances in information technology and computer collaboration tools to improve coordination and increase productivity in the design of building projects. Based on a structured information model, presented in a companion paper, a collaborative design system is developed incorporating (1) a client-server environment for representing building data, recording design rationale, and effectively managing design changes; and (2) Internet-based collaboration tools for sharing documents, reviewing changes, and conferencing among remote design participants. Implementation issues and the perceived changes imposed on the traditional design process are discussed, and an example application is worked to demonstrate the applicability and features of the developed prototype. The developments made in this paper provide guidelines for modeling complex information-dependent processes in the construction domain.     

Expression Patterns of DNA Methylation and Demethylation Genes during Plant Development and in Response to Phytohormones

DNA methylation and demethylation precisely and effectively modulate gene expression during plant growth and development and in response to stress. However, expression profiles of genes involved in DNA methylation and demethylation during plant development and their responses to phytohormone treatments remain largely unknown. We characterized the spatiotemporal expression patterns of genes involved in de novo methylation, methyl maintenance, and active demethylation in roots, shoots, and reproductive organs using β-glucuronidase (GUS) reporter lines. Promoters of DNA demethylases were generally more highly active at the mature root tissues, whereas the promoters of genes involved in DNA methylation were more highly active at fast-growing root tissues. The promoter activity also implies that methylation status in shoot apex, leaf primordia, floral organs, and developing embryos is under tight equilibrium through the activity of genes involved in DNA methylation and demethylation. The promoter activity of DNA methylation and demethylation-related genes in response to various phytohormone treatments revealed that phytohormones can alter DNA methylation status in specific and redundant ways. Overall, our results illustrate that DNA methylation and demethylation pathways act synergistically and antagonistically in various tissues and in response to phytohormone treatments and point to the existence of hormone-linked methylome regulation mechanisms that may contribute to tissue differentiation and development.     

Project Performance Control in Reconstruction Projects

Cost, schedule, and quality are the main indicators of performance in construction projects. These indicators are highly interrelated and require some balance and trade-off among them to achieve efficient overall control over project performance. Focusing on these performance indicators, the primary objective of this study is to investigate the use of conventional control techniques in projects involving reconstruction of occupied buildings. To facilitate this analysis, performance data have been collected, using a questionnaire survey, from 25 reconstruction and 15 new construction projects. The survey was followed by structured interviews with construction practitioners and project participants to elicit success-related factors and to identify some of the unique problems affecting the control of reconstruction projects. Using the collected data, performance comparison was conducted between new and reconstruction projects along with a detailed analysis of the suitability of existing techniques for the control of the cost, schedule, and quality in reconstruction projects.