Sulphur dioxide loadings over megacity Lahore (Pakistan) and adjoining region of Indo-Gangetic Basin

This article presents spatial and temporal variations of planetary boundary layer (PBL) sulphur dioxide (SO₂) over megacity Lahore and adjoining region, a typical representative area in the Indo-Gangetic Basin (IGB) largely influenced by transported volcanic SO₂ from Africa, Middle East, and southern Europe, by using data retrieved from satellite-based Ozone Monitoring Instrument (OMI) during October 2004–September 2015. We find a positive trend of 2.4% per year (slope 0.01 ± 0.005 with y-intercept 0.35 ± 0.03 Dobson Unit (DU), correlation coefficient r = 0.55 and 2-tailed p-value at 0.1) of OMI-SO₂ column with the average value of 0.4 ± 0.05 DU. Strong seasonality of OMI-SO₂ column is observed over the region linked with local meteorology, patterns of anthropogenic emissions, crop residue burning, and vegetation cover. There exists a seasonal high value in winter 0.56 ± 0.24 DU with a peak in December 0.67 ± 0.26 DU. The seasonal lowest value is observed to be 0.29 ± 0.11 DU in wet summer with minimum value in July 0.25 ± 0.06 DU. High growth rates of OMI-SO₂ column over the study region have been observed in January, June, October, and December ranging from 5.7% to 11.6% per year. Satellite data show elevated OMI-SO₂ columns in 2007, 2008, 2011, and 2012 largely contributed by trans-boundary volcanic SO₂. A detailed analysis of volcanic SO₂ transported from Africa and Middle East (Jabal Al-Tair, Dalaffilla, and Nabro volcanoes) over the study area is presented. Air mass trajectories suggest the presence of long-range transported volcanic SO₂ at high altitude levels over Lahore and IGB region during the volcanic episodes. The SO₂ enhancements in PBL during winter season are generally due to significant vertical downdraft of high-altitude volcanic SO₂. For the first time, we present significant influence of volcanic SO₂ from southern Europe (Mt. Etna volcano) reaching over the study area. Daily mean OMI-SO₂ levels up to 21.4, 10.0, 5.6, and 2.4 DU have been noticed due to the eruptions from Dalaffilla, Mt. Etna, Nabro, and Jabal Al-Tair volcanoes, respectively.     

Détermination du facteur de multiplication M pour un fonctionnement optimal des photodétecteurs à avalanche

The purpose of this paper is relative to the determination of the multiplication factor Mfor an optimum behaviour of the avalanche photodetector. Two types of avalanche photodetector s are compared: a silicon structure n ⁺ πpπp ⁺ Read diode and a GaAlAs heterostructure. Calculating the Noise Equivalent Power (nep)of the whole system, the law S_i(f) =2q I_phoM_x is used, where the parameter x is determined experimentally in both avalanche photodetectors. The exponent x (between 2 and 4) dominates in the nep expression and the ideal nep for the avalanche photodetector system is obtained when x equals 2.     

Three Dimensional Conceptualisation of Hydrogeological Environment to Underpin Groundwater Management in Irrigation Area

Australian irrigated agriculture utilises about 70?% of all water used in the country, 21?% of which is derived from groundwater. Sustainability for irrigated agriculture also depends on keeping the watertables at a safe level below the rootzone to avoid salinisation and reduction in crop yields. There is a vital need to understand groundwater and aquifer systems and their roles in the sustainability of irrigated agriculture in order to manage groundwater properly. This study builds on the previous hydrogeological and groundwater investigations of the Coleambally Irrigation Area (CIA) in New South Wales of Australia. It presents a new approach which systematically characterises regional hydrogeological environment using a three-dimensional (3-D) conceptual framework developed in ArcGIS. The 3-D hydrological conceptualisation of the CIA has integrated disparate sources of data into a coherent knowledge base for a better visualisation of hydrogeological characteristics and a comprehensive analysis of groundwater flow and aquifers. As an application example, the model was used to develop cross-sectional models of the area and to estimate regional-scale net recharge. The results have provided a basis for the numerical modelling and added values to procedures which underpin irrigation system management investment decisions through improving the understanding of hydrogeology underlying the area and creating an action-oriented dialogue among stakeholders.     

Effect of size and shape of metal particles to improve hardness and electrical properties of carbon nanotube reinforced copper and copper alloy composites

Utilizing the extra-ordinary properties of carbon nanotube (CNT) in metal matrix composite (MMC) for macroscopic applications is still a big challenge for science and technology. Very few successful attempts have been made for commercial applications due to the difficulties incorporating CNTs in metals with up-scalable processes. CNT reinforced copper and copper alloy (bronze) composites have been fabricated by well-established hot-press sintering method of powder metallurgy. The parameters of CNT–metal powder mixing and hot-press sintering have been optimized and the matrix materials of the mixed powders and composites have been evaluated. However, the effect of shape and size of metal particles as well as selection of carbon nanotubes has significant influence on the mechanical and electrical properties of the composites. The hardness of copper matrix composite has improved up to 47% compared to that of pure copper, while the electrical conductivity of bronze composite has improved up to 20% compared to that of the pure alloy. Thus carbon nanotube can improve the mechanical properties of highly-conductive low-strength copper metals, whereas in low-conductivity high-strength copper alloys the electrical conductivity can be improved.     

Influence of metal‐oxide‐supported bentonites on the pyrolysis behavior of polypropylene and high‐density polyethylene

In this article, we report on the pyrolysis of polypropylene (PP) and high‐density polyethylene (HDPE) in the absence and presence of plain and metal‐oxide‐impregnated bentonite clays [BCs; acid‐washed bentonite clay (AWBC), Zn/AWBC, Ni/AWBC, Co/AWBC, Fe/AWBC, and Mn/AWBC] into useful products. Thermal and catalytic runs were performed at 300°C in the case of PP and at 350°C in the case of HDPE for a contact time of 30 min. The effects of different catalysts and their concentrations on the overall yields and the yields of liquid, gas, and residue were studied. The efficacy of each catalyst is reported on the basis of the highest liquid yields (in weight percentage). The derived liquid products were analyzed by Fourier transform infrared spectroscopy and gas chromatography–mass spectroscopy; this confirmed the presence of paraffins, olefins, and naphthenes. The results indicate the catalytic role of impregnated BCs compared to plain BC with the optimum efficiency shown by Co/AWBC in the case of PP and Zn/AWBC in the case of HDPE toward the formation of liquid products in a desirable C range with the enrichment of olefins and naphthenes in the case of PP and paraffins and olefins in the case of HDPE compared to the thermal run. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41221.     

Interrogating the Tailoring Steps of Pactamycin Biosynthesis and Accessing New Pactamycin Analogues

Pactamycin is a bacteria‐derived aminocyclitol antibiotic with a wide‐range of biological activity. Its chemical structure and potent biological activities have made it an interesting lead compound for drug discovery and development. Despite its unusual chemical structure, many aspects of its formation in nature remain elusive. Using a combination of genetic inactivation and metabolic analysis, we investigated the tailoring processes of pactamycin biosynthesis in Streptomyces pactum. The results provide insights into the sequence of events during the tailoring steps of pactamycin biosynthesis and explain the unusual production of various pactamycin analogues by S. pactum mutants. We also identified two new pactamycin analogues that have better selectivity indexes than pactamycin against malarial parasites.     

Slope instability analysis in Phyllitic rock in the Lesser Himalayan using three different modeling approach

Bulletin of Engineering Geology and the Environment - The numerical methods for slope stability problems always have a serious concern related to their continuum and discontinuum nature. In...     

A Review on the Role of miR-149-5p in the Carcinogenesis

miR-149 is an miRNA with essential roles in carcinogenesis. This miRNA is encoded by the MIR149 gene on 2q37.3. The miR-149 hairpin produces miR-149-5p and miR-149-3p, which are the “guide” and the sister “passenger” strands, respectively. Deep sequencing experiments have shown higher prevalence of miR-149-5p compared with miR-149-3p. Notably, both oncogenic and tumor suppressive roles have been reported for miR-149-5p. In this review, we summarize the impact of miR-149-5p in the tumorigenesis and elaborate mechanisms of its involvement in this process in a variety of neoplastic conditions based on three lines of evidence, i.e., in vitro, in vivo and clinical settings.     

The Plasminogen–Activator Plasmin System in Physiological and Pathophysiological Angiogenesis

Angiogenesis is a process associated with the migration and proliferation of endothelial cells (EC) to form new blood vessels. It is involved in various physiological and pathophysiological conditions and is controlled by a wide range of proangiogenic and antiangiogenic molecules. The plasminogen activator–plasmin system plays a major role in the extracellular matrix remodeling process necessary for angiogenesis. Urokinase/tissue-type plasminogen activators (uPA/tPA) convert plasminogen into the active enzyme plasmin, which in turn activates matrix metalloproteinases and degrades the extracellular matrix releasing growth factors and proangiogenic molecules such as the vascular endothelial growth factor (VEGF-A). The plasminogen activator inhibitor-1 (PAI-1) is the main inhibitor of uPA and tPA, thereby an inhibitor of pericellular proteolysis and intravascular fibrinolysis, respectively. Paradoxically, PAI-1, which is expressed by EC during angiogenesis, is elevated in several cancers and is found to promote angiogenesis by regulating plasmin-mediated proteolysis and by promoting cellular migration through vitronectin. The urokinase-type plasminogen activator receptor (uPAR) also induces EC cellular migration during angiogenesis via interacting with signaling partners. Understanding the molecular functions of the plasminogen activator plasmin system and targeting angiogenesis via blocking serine proteases or their interactions with other molecules is one of the major therapeutic strategies scientists have been attracted to in controlling tumor growth and other pathological conditions characterized by neovascularization.     

Synthesis of Architectural-Cubic Porous Silicon by Electroless Stain Etching in V2O5 and HF Solution

Silicon - Porous silicon (PSi) samples were prepared via electroless stain etching of silicon substrates in HF using V2O5 as an oxidant and ethanol as a surfactant for different etching times. The...