Tannin fraction from Ampelopsis grossedentata leaves tea (Tengcha) as an antioxidant and α‐glucosidase inhibitory nutraceutical

Leaf of Ampelopsis grossedentata is a new resource of functional foods with healthful properties. Antioxidant and α‐glucosidase inhibitory activities of water extract (made in the style of drinking), tannin fraction (TF) and dihydromyricetin (DMY) from A. grossedentata leaves were evaluated. The main component of TF was identified as gallotannins. DPPH and ABTS radical scavenging activities and reducing power of TF were superior to those of water extract, however, inferior to those of DMY. In no PBS wash protocol of cellular antioxidant activity assay, DMY and TF exhibited similarly, while in PBS wash protocol, the value of TF was higher than that of DMY. In addition, TF possessed the highest α‐glucosidase inhibitory activities (IC₅₀ = 1.94 μg mL^?1), followed by water extract (IC₅₀ = 23.10 μg mL^?1) and DMY (IC₅₀ = 72.21 μg mL^?1). The strong α‐glucosidase inhibitory activity of TF may attribute to the binding capacity to enzymes, as confirmed by fluorescence analysis.     

Stabilisation mechanism of various inulins and hydrocolloids: Milk–sour cherry juice mixture

Milk–fruit juice mixtures, such as the mainly acidic nutraceutical soft drinks, usually suffer from phase separation due to aggregation of caseins at low pH. In this study, short‐chain inulin (SCI), native inulin (NI), long‐chain inulin (LCI) and a combination of long‐ and short‐chain inulins (LCI:SCI) (MIX) in different ratios (20:80, 50:50 and 80:20) were added (up to 10% w/v) to a milk–sour cherry juice mixture and their stabilisation mechanisms investigated using rheological, microstructural and zeta potential observations. In addition, gum tragacanth (GT) and Persian gum (PG) as adsorbing and guar gum (GG) as nonadsorbing hydrocolloids were combined with inulin to enhance their stabilising properties. Finally, sensory analyses were carried out on the stabilised samples. According to our findings, LCI fully stabilised the mixture (8% w/v), while LCI: SCI and NI only reduced phase separation at very high concentrations, and SCI had no significant effect on the stabilisation. Moreover, no inulin aggregates and rheological changes were observed with SCI. However, LCI, LCI: SCI and NI formed inulin aggregates and the mixtures became even more viscous and thixotropic (LCI > LCI: SCL > NI). Based on these observations, it can be concluded that chain length and concentration are two important factors that affect the functionality of inulin. On the other hand, the combination of inulin with GT and PG did not have any pertinent effect on the stabilisation. However, the mixture of inulin and GG could stabilise the mixtures at certain ratios and concentrations. Furthermore, in mixtures containing GG and SCI, GG played the main role in the stabilisation by increasing the viscosity and forming gel network.     

Estimating process capability indices of multivariate nonnormal processes

The capability analysis of production processes where there are more than one correlated quality variables is a complicated task. The problem becomes even more difficult when these variables exhibit nonnormal characteristics. In this paper, a new methodology is proposed to estimate process capability indices (PCIs) of multivariate nonnormal processes. In the proposed methodology, the skewness of the marginal probability distributions of the variables is first diminished by a root transformation technique. Then, a Monte Carlo simulation method is employed to estimate the process proportion of nonconformities (PNC). Next, the relationship between PNC and PCI is found, and finally, PCI is estimated using PNC. Several multivariate nonnormal distributions such as Beta, Weibull, and Gamma are taken into account in simulation experiments. A real-world problem is also given to demonstrate the application of the proposed procedure. The results obtained from both the simulation studies and the real-world problem show that the proposed method performs well and is able to estimate PCI properly.     

Heart rate variability in low birth weight growth restricted children during sleep and wake stages

Intrauterine growth restricted (IUGR) individuals have greater predisposition to develop a metabolic syndrome in later life manifesting itself as obesity, hypertension, type 2 diabetes or cardiovascular disease. Poor fetal growth may alter the regularity mechanism of cardiac autonomic system that is involved in the development of these diseases. The malfunctioning of the cardiac autonomic system assessed by decrease in heart rate variability (HRV) is associated with negative cardiovascular outcomes. This study is aimed at investigating the risk of development of coronary heart disease in IUGR children in later life. For that purpose HRV analysis of normal and growth restricted children was performed during sleep and wake stages. The study group consisted of 9–10 years old, 32 normal, 20 low birth weight IUGR children. The standard time domain HRV metrics (mean RR, SDNN, RMSSD, NN50 and pNN50) and Poincaré indices (SD₁ and SD₂) were used to analyse and compare the RR-interval time series of these groups. The IUGR children showed lower HRV as compared with normal children during both sleep and wake stages. The significantly decreased HRV during sleep provide an evidence of autonomic derangement that may be associated with higher risk of lethal arrhythmias in the IUGR children in later life.     

Analytical solutions for one-phase seepage flows impeded by wellbore seals

Steady, one-phase, plane and axisymmetric, Darcian seepage in a homogeneous rock adjacent to a partly isolated wellbore with annular seals is analytically studied. Water flows from an isobaric feeding contour and a fracture, which is kept at the same pressure as the feeding contour, to a wellbore. Partial isolation of the wellbore makes its wall a composition of intermittently arrayed no-flow boundaries, which model the wellbore seals, and isobaric surfaces, which model the annular compartments between the seals and a wellbore tubular on which the seals are mounted. Pressure drops from the aquifer (fracture) to the compartments and further to the borehole that generates a hierarchy of flows mathematically equivalent to the Toth [Freeze, R.A., Cherry, J.A., 1979. Groundwater. Prentice Hall, Englewood Cliffs] hydrogeological patterns of regional, intermediate and local groundwater flows on the scale of catchments. Conformal mappings of complex potential domains onto physical planes, where water seepage takes place, are used to tackle the fragments of the full feeding contour-fracture–sealed wellbore system. Explicit rigorous solutions for the flow characteristics (pressure and stream function) enable calculating optimal wellbore isolation with a criterion of minimal water flow rate from the fracture.     

On the stabilization mechanism of Doogh (Iranian yoghurt drink) by gum tragacanth

Serum separation in Doogh, a favorite acidic dairy drink in the Middle East, is a major problem which happens due to low pH (≤4.00) and aggregation of caseins. Therefore, in the present study the influence of gum tragacanth (GT) and its soluble and insoluble fractions on prevention of serum separation as well as stabilization mechanisms were investigated using rheological, zeta potential and microscopic measurements. According to our findings, the soluble tragacanthin (T) and GT prevented serum separation at concentrations of 0.100 and 0.200%, respectively. Furthermore, the proper rheological model for control was Newtonian whereas for the others it was Power law. Based on viscoelastic experiments, Dooghs containing T and GT exhibited dominant viscose and elastic behaviors, respectively. In addition, the presence of T and GT changed the zeta potential values from positive to negative. It was elucidated that T adsorbs onto casein and induces stabilization via electrostatic and steric repulsions. Moreover, the insoluble bassorin (B) may assist stabilization by increasing the viscosity.     

Analytical simulation and PROFAT II: a new methodology and a computer automated tool for fault tree analysis in chemical process industries

Fault tree analysis (FTA) is based on constructing a hypothetical tree of base events (initiating events) branching into numerous other sub-events, propagating the fault and eventually leading to the top event (accident). It has been a powerful technique used traditionally in identifying hazards in nuclear installations and power industries. As the systematic articulation of the fault tree is associated with assigning probabilities to each fault, the exercise is also sometimes called probabilistic risk assessment. But powerful as this technique is, it is also very cumbersome and costly, limiting its area of application. We have developed a new algorithm based on analytical simulation (named as AS-II), which makes the application of FTA simpler, quicker, and cheaper; thus opening up the possibility of its wider use in risk assessment in chemical process industries. Based on the methodology we have developed a computer-automated tool. The details are presented in this paper.     

Polyphenols attached graphene nanosheets for high efficiency NIR mediated photodestruction of cancer cells

Green tea-reduced graphene oxide (GT-rGO) sheets have been exploited for high efficiency near infrared (NIR) photothermal therapy of HT29 and SW48 colon cancer cells. The biocompatibility of GT-rGO sheets was investigated by means of MTT assays. The polyphenol constituents of GT-rGO act as effective targeting ligands for the attachment of rGO to the surface of cancer cells, as confirmed by the cell granularity test in flow cytometry assays and also by scanning electron microscopy. The photo-thermal destruction of higher metastatic cancer cells (SW48) is found to be more than 20% higher than that of the lower metastatic one (HT29). The photo-destruction efficiency factor of the GT-rGO is found to be at least two orders of magnitude higher than other carbon-based nano-materials. Such excellent cancer cell destruction efficiency provided application of a low concentration of rGO (3 mg/L) and NIR laser power density (0.25 W/cm²) in our photo-thermal therapy of cancer cells.     

Evaluation of toxic elements in baby foods commercially available in Pakistan

In present work, the concentrations of toxic elements, aluminium (Al), cadmium (Cd), nickel (Ni) and lead (Pb) were measured in different solid baby foods (BFs), primarily to evaluate whether the intakes comply within permissible levels of these toxic elements (TEs). The BFs were evaluated for total contents of TEs, using a simple and fast ultrasound-assisted extraction (UAE) method. The accuracy of the proposed UAE method was ensured by using certified reference materials and results obtained by conventional wet acid digestion method on same CRM, at 95% confidence level. The range of the investigated TEs in different BFs were 4770–35,200, 25.6–88.3, 124–332 and 52.5–90.6 μg/kg for Al, Cd, Ni and Pb, respectively. The results indicated that BFs including rice cereals have high level of all four TEs. The daily intakes of TEs for children through BFs have also been estimated, and are well below the recommended tolerable levels.     

Evolution of manufacturing parameters in Al/Ni3Al composite powder formation using blending and mechanical milling processes

Aluminu–matrix composites produced by Ni₃Al intermetallic particles are increasingly used in aerospace and structural applications because of their outstanding properties. In manufacturing of metal–matrix composites using powder metallurgy blending and milling are important factors. They control the final distribution of reinforcement particles and porosity in green compacts which in turn, strongly affect the mechanical properties of the produced PM materials. This paper studies different conditions for producing composite powders with uniform dispersion of Ni₃Al particles in aluminum powders and improved physical and mechanical properties. The results indicated that an intermediate milling time for fabrication of composite powder, better than prolonged and shortened ones, causes better microstructure and properties. It was shown that addition of 5 vol.% Ni₃Al particles, produced by 15 h mechanical alloying to aluminum powders, and then 12 h blending operation provides an appropriate condition for producing Al–Ni₃Al composite powder.