Transmission Characteristics of Hybrid Modes in Corrugated Waveguides Above the Bragg Frequency

We studied the transmission characteristics of hybrid modes in a corrugated circular waveguide above the Bragg frequency to develop a broad-band transmission line for millimeter waves. Millimeter waves at 294 GHz were transmitted into a straight waveguide. From observed power profiles in waveguide cross-sections, a high attenuation rate of 0.13 dB/m was obtained. To match a theoretical attenuation constant with the experimental one, we introduced an ad hoc coefficient of conventional surface reactance in the waveguide wall. This was necessary because the wall began to look like the surface with a decreasing anisotropic reactance owing to the frequency above the Bragg frequency. Using nonlinear optimization for mode content analysis, the observed power profiles in the waveguide cross-section were matched with theoretical profiles. There was good agreement between the calculated and observed centers of power profiles and attenuation rate along the waveguide. The theoretical analysis showed that the magnetic field at the waveguide wall increases and the substantial attenuation takes place. Above the Bragg frequency coupling to backwards propagating modes is a point of consideration. A combination of the backwards propagating EH_1,26 and the forward propagating HE₁₁ modes satisfied the Bragg condition at 294.7 GHz which was the nearest frequency of operating frequency. A strong attenuation of the incoming HE₁₁ mode by Bragg resonance was not expected due to large difference of 0.7 GHz. It becomes clear that the observed high transmission loss outside of the Bragg resonance can be explained by a decrease in anisotropic surface reactance at the wall.     

Hydrodynamics characterization of the Maxblend impeller

The hydrodynamic characteristics of the Maxblend^TM impeller have been investigated in the case of viscous Newtonian fluids. Both laboratory experiments and 3D finite element based computational fluid dynamics (CFD) simulations have been carried out. The power consumption, the mixing evolution yielding the mixing time, and the effect of baffles in the laminar and transition flow regimes have been determined. It was found that the limit Reynolds number between the laminar and transition regimes is approximately 25 and 38 for the unbaffled and baffled configurations, respectively. Based on the range of Reynolds numbers studied in this work, the best window performance of the Maxblend^TM mixer where fast and homogenous mixing is achieved is the end of the laminar regime and the early transition regime with baffles.     

Electrical switching of the vortex core in a magnetic disk

A magnetic vortex is a curling magnetic structure realized in a ferromagnetic disk, which is a promising candidate for a memory cell for future non-volatile data-storage devices. Thus, an understanding of the stability and dynamical behaviour of the magnetic vortex is a major requirement for developing magnetic data-storage technology. Since the publication of experimental proof for the existence of a nanometre-scale core with out-of-plane magnetization in a magnetic vortex, the dynamics of vortices have been investigated intensively. However, a way to electrically control the core magnetization, which is a key for constructing a vortex-core memory, has been lacking. Here, we demonstrate the electrical switching of the core magnetization by using the current-driven resonant dynamics of the vortex; the core switching is triggered by a strong dynamic field that is produced locally by a rotational core motion at a high speed of several hundred metres per second. Efficient switching of the vortex core without magnetic-field application is achieved owing to resonance. This opens up the potentiality of a simple magnetic disk as a building block for spintronic devices such as a memory cell where the bit data is stored as the direction of the nanometre-scale core magnetization.     

Performance analysis of shaft generator systems

A shaft generator system supplies electrical power required in a ship by using a part of the power produced by the main engine. Since the speed of the main engine can vary over a wide range, an externally commutated thyristor inverter, which has high reliability, is generally used to produce ac power with constant voltage and frequency. In this paper, a set of system equations, by which the total harmonic distortion of the output voltage, for example, can be estimated, is derived first. The effects of leading angle of the inverter and the reactance of ac reactor located in the output side of the inverter on the system performances and the operation limit of the system are then clarified. Moreover, a way of taking the system losses into account is proposed to obtain precise calculation results. Finally, the apparent power for the synchronous condenser to provide reactive power in the system is discussed. © 2000 Scripta Technica, Electr Eng Jpn, 131(3): 70–79, 2000     

Cell distributions in and sound absorption characteristics of flexible polyurethane foams

In this article, the two-dimensional distributions of cells from the cross section of some flexible polyurethane foams were cleared, and the three-dimensional distributions of cells based on Saltykov's theory were estimated further. As a result, it was found that a mean of the two-dimensional distributions of cells was a good linear relation with a mean of the three-dimensional distributions of cells, and it was confirmed that cell structure of the foams which should have been analyzed in the three-dimensional distributions was evaluated by analysis of the two-dimensional distributions fully. It was also found that not only cell number but also cell distribution was necessary in the evaluation of flexible polyurethane foams, and cell diameter was closely related to the sound absorption coefficient in polyester-based flexible polyurethane foams. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 1395–1402, 1997     

CRISPR Screen Contributes to Novel Target Discovery in Prostate Cancer

Prostate cancer (PCa) is one of the common malignancies in male adults. Recent advances in omics technology, especially in next-generation sequencing, have increased the opportunity to identify genes that correlate with cancer diseases, including PCa. In addition, a genetic screen based on CRISPR/Cas9 technology has elucidated the mechanisms of cancer progression and drug resistance, which in turn has enabled the discovery of new targets as potential genes for new therapeutic targets. In the era of precision medicine, such knowledge is crucial for clinicians in their decision-making regarding patient treatment. In this review, we focus on how CRISPR screen for PCa performed to date has contributed to the identification of biologically critical and clinically relevant target genes.     

Monte Carlo simulations of spectral albedo for artificial snowpacks composed of spherical and nonspherical particles

The optical properties of snowpacks composed of spherical and nonspherical particles artificially prepared in a cold laboratory are investigated by measuring spectral albedos. The measured spectral albedo in the spectral region lambda=0.35-2.5 microm is compared with the theoretically calculated albedo, for which a Monte Carlo radiative transfer model is employed for multiple scattering combined with the Mie theory and the ray-tracing technique for single scattering by snow particles. Since the spherical particles are a little aggregate, the effects of a cluster of the spheres on snow albedo are examined using a generalized multiparticle Mie-solution model [Appl. Opt. 34, 4573 (1995); J. Quant. Spectrosc. Radiat. Transf. 79-80, 1121 (2003)]. The snow albedo of a cluster of the spheres can be represented with that of the singe sphere slightly larger than its component of the cluster in case of small grains. The observed albedos for the spherical snow particles agree with the theoretically calculated ones for the snow grain size measured in the snow pit work. The snow albedos for the nonspherical particles, which were dendrites, are influenced by the branch width and the branch length, based on a comparison of the theoretically calculated albedo by using circular cylindrical snow particles and the observed albedo. The snow albedo in the near-infrared region depends on the branch width only when the branch length is sufficiently greater than the branch width. The comparison between the spherical and nonspherical snow particles indicates that the spectral albedo of the nonspherical particles can be represented by using an equal volume-area ratio sphere.